General :: Recover A Deleted File Using The Ext3 File System?
Jan 10, 2011
I used the ext3 format when I formatted my partition prior to installing Ubuntu10.10. I had accidentally deleted a file and began the process to get it back. It wasn't critical but helpful to recover the file. To make a long story short I ran into to some unexpected road blocks. I tried to use PhotoRec to get the job done but with no success.
I'm just looking down the road in the event I might have to recover something important.If it would be better going back to the Fat32 file system I would rather do it sooner than later. Just as a side note I am dual booting between linux and windows.
View 6 Replies
ADVERTISEMENT
Jun 20, 2009
I have accidentally removed vmware virtual disk, my host operating system is RHEL5.2 with ext3 file system, i have used photorec, magicresue and foremost but still no luck to recover the vmdk file. i have seen in foremost configuration file that there are some predefined files (ex- doc, pdf, jpg, avi, zip, etc),
1. is there any way to add vmdk file extension on that configuration file?
2. if yes how can i do ?
3. by adding vmdk on configuration file, can i specifically use recover option for vmdk?
View 2 Replies
View Related
Jul 19, 2011
recover deleted files using "debugfs" & "extundelete" by running:Code:sudo debugfs /dev/sda3
and find inode number of deleted file using "ls -d" command and then running:Code:sudo extundelete /dev/sda3 --restore-file <inode#>but when my desired file was in a deleted folder I can't find my desired file inode number using debugfs
View 1 Replies
View Related
Feb 16, 2011
Say I have a file that's downloading (from a source that's hard to re-download from), but accidentally deleted from the filesystem namespace (/tmp/blah), and I'd like to recover this file. Normally I could just cp /proc/$PID/fd/$FD /tmp/blah, but in this case that would only get me a partial snapshot, since the file is still downloading. Furthermore, once the download completes, the downloading process (e.g. Chrome) will close the FD. Any way to recover by inode/create a hard link? Any other solutions? If it makes any difference, I'm mainly concerned with ext4.
View 3 Replies
View Related
Jul 9, 2010
How to recover a removed file under linux
Is there any free undelete software for the Mac?
I have accidentally deleted a very-very important file in my Linux (Ubuntu) machine using the command rm.
Is there any way to recover it?
View 6 Replies
View Related
May 13, 2011
$ cat important_file > /dev/null &
[1] 9711
$ rm important_file
[code]....
View 2 Replies
View Related
Aug 8, 2010
I was wondering if it was possible to display inodes of deleted files using a command. If yes, is it possible to recover the deleted files from their inodes?
View 1 Replies
View Related
Jan 3, 2010
i want to know how can i recover deleted files in ext3 partition manually(not using any tools)?? probably using the 'grep' command. if someone know pls tell me...
(i have recoverd deleted files in an ext2 partition with debugfs and dump . but dumping doesnt work for ext3)
View 4 Replies
View Related
Feb 10, 2011
I am using CentOS 5.5.I suppose this is an oft repeated question. I accidentally deleted, using rm command, 2 wmv files. The files were in a single ext3 1Tb drive, with just 1 partition --- the ext3 one. Each file is 600 - 800mb. The 1Tb drive has only about 20Gb data.Immediately after deleting the files i unmounted the drive (/dev/sdc1). Thereafter i searched the the net and came to know of the recovery tools foremost and photorec. I have installed both of them. I am currently running both of them as root --- foremost is just showing a lot of * signs on the terminal and photorec has managed to find some txt and png files --- but no wmv.For foremost i used: /usr/sbin/foremost -t wmv -i /dev/sdc1For photorec i followed some instructions available on the web.
In the meantime, based on some post on the net i ran debugfs as root, then cd into the directory where the files were deleted. Then on typing ls -d i managed to get the inodes of the 2 deleted files and the names of the deleted files are also correct. The instructions on the net http://www.theavidcoder.com/?p=3 tell me to run fsstat and dls both of which i am unable to find in /bin, /usr/bin, /usr/sbin and /sbin. So i am unable to proceed further.
View 5 Replies
View Related
Jul 15, 2009
I'm trying to mount a second hard drive as a ext3 (rw_acl,user_xattr). I type the ff.:
# mkfs.ext3 -c /dev/sdb1(it seems to create a file system from this 2nd HD)
then type:
# mount -v /dev/sdb1 / type ext3 (it seems to mount it)
But when I check the ext3 systems with typing:
# mount -t ext3 (to check the list of ext3 devices, it gives me this)
/dev/sda1 on / type ext3 (rw,acl,user_xattr)
/dev/sda2 on /home type ext3 (rw,acl,user_xattr)
/dev/sdb1 on / type ext3 (rw)
How can I make /dev/sdb1 on type ext3 as (rw,acl,user_xattr) as the others?
View 11 Replies
View Related
Jul 7, 2011
I was in the process of installing Ubuntu 11.10, but got stuck choosing which file system to use. ext3 and ext4; which is better for a personal desktop? If ext4 is better, will it work well on my old PC (bought 3 years ago), or perhaps ext4 is not actually compatible with an old hard disk?
View 4 Replies
View Related
Sep 29, 2010
I am using linux kernel 2.6.10 after some time one of the file system is becoming read only. Here is the kernel dump
Freeing unused kernel memory: 160k init
kjournald starting. Commit interval 5 seconds
EXT3-fs warning (device hda1): ext3_clear_journal_err: Filesystem error recorded from previous mount: IO failure
[code]....
View 6 Replies
View Related
Jun 27, 2010
I have an image of an ext3 file system done with dd. I know that the file system is corrupted but I want to try to recover some files. Whatever I dd it again to the original partition or assign the dd image to a loop device, that's what happens:
- dumpe2fs -h gives me a valid ext3 superblock.
- as I try to mount the device read only, it fails with a bad magic number error.
- executing dumpe2fs -h again gives bad magic number error.
- trying debugfs or fsck with backup superblocks fails the same way.
For me it seems that in spite of mounting the device as read-only, mount command do something wrong with the superblock as before the mount the superblock is correct and it's there.
View 4 Replies
View Related
Oct 1, 2009
There were some files residing on my ext3 file system, using Ubuntu as my linux distribution. Yesterday I formatted the hard drive using a windows install CD, rewriting it with a new NTFS partition. I'm willing to restore my personal files deleted due to this format.
View 3 Replies
View Related
Sep 7, 2009
How well is the ext4 new file system mounting compatibility with the older ext3 previous Linux installations ? I refer to Ubuntu 9.04 and the new Fedora 11 which have the option to install with the ext4 file format. Will it be better if I install with the older ext3, so that I will be able to mount all other Linux from each other in a multi-boot system ?
View 6 Replies
View Related
Feb 27, 2010
I have accidentally ended up in deleting my root directory while I blindly fired command while watching movie.
I fired following command
#rm -rf ~/<SPACE>*.out
instead of this command
#rm -rf ~/*.out
Things already done:
1) Created /root directory relogged to get some of basic settings of gnome and Desktop.
2) Things went well now when I login my desktop ,gnome environment and other things looks to be working well only prompt on my terminal has changed. I can fix it any ways.
Things I want to ask:
1) I haven't studied much about contents of /root directory to best of my knowledge is it like other user's home directory with some basic configuration files for mostly required applications. SO my question is have I lost any thing important system file or something?
2) If I have lost any important configuration or system data how can I recover it without reinstalling whole system? (My opinion about this is, It is quite possible but to do so, as far as I know capabilities of linux. But I still want comments from experts before I try any things on it because I don't want to backup my whole HDD and reinstall the whole stuff again for me and also my sister's stuff in MS.)
View 4 Replies
View Related
Jul 3, 2011
My main hard disk died and I replaced it. After installing windows in a small partition in /dev/sda, I thought I will try linux mint and went for it. (I need windows to play AOE, but ubuntu is my primary OS)I didnt see the options properly or some distraction, I choose the "install alongside windows" option probably expecting it to install it in the unallocated partition next to the windows installation. I had completely forgotten my second internal drive /dev/sdb which has the backup data. Linux mint went and installed itself on that drive.
Is there a way to recover individual files from the second harddrive. Now if I boot or open it through live cd, all I see in the linux mint file systems. I want to aleast recover my CV/resume from the second drive. The second drive is a single ext4 file system The old drive is completely dead, it doesnt even get recognized when I attach it to SATA.
View 1 Replies
View Related
Oct 25, 2009
How would I format my partition into a ext3 file system?
View 1 Replies
View Related
Feb 9, 2011
I am using Ubuntu since release 8.10, but it is first time when i can`t solve problem
when i tried to create new NTFS partition on unallocated disk space with Paragon Partition Manager (damn, that was stupid). Process was aborted with error (later i finally made it with Gparted without problems)
After reboot mine Ubuntu say:
Code:
Errors were found while checking the disk drive for /
Press F to attempt to fix errors, I to ignore, S to skip mounting or M for manual recovery. I pressed "F" but that had help only for a boot and doesn`t really fix error :`(
Later i booted from liveCD and had checked partition (/dev/sdb1; file system - ext3) with gparted (result - aborted fixing process with error) Now i can`t even boot from that partition and even mount it from other linux system.
mine fdisk -l
Code:
/dev/sdb1 * 1 5957 47849568 83 Linux - problematic partition (unmountable)
/dev/sdb2 5958 29983 192988845 7 HPFS/NTFS
[Code]....
PhotoRec recover most of my files, but i need complete partition.
View 9 Replies
View Related
Apr 13, 2010
I need evaluate the ext3 file system performance; i need define:
- services provided
- parameters and
- the performance with different parameter values; for example, changin the value of the "data" parameter (journal, ordered, writeback).
I do not know what services ext3 provides. Well, i know intuitively that it provides services to read, write and erase files. But, there are anything more?. Where can i find the API?. Is the ext3 file system POSIX compliant?
View 7 Replies
View Related
Aug 29, 2009
I accidentally formatted a HDD when I meant to format a USB thumb drive. The HDD is a 250GB drive that had about 180GB of data in the EXT3 format. I was actually attempting to make a bootable USB thumb drive with TRK (Trinity Rescue Kit). Kind of funny/ironic to mess up a drive while trying to make a rescue disk. Anyway, as soon as I realized what had happened, I pulled the drive out of the computer to make sure I didn't do anything else stupid to it. I have been searching for some way to recover and haven't really found much. There are a lot of programs to get Windows data back, but I haven't seen anything specific on the EXT3 file system.
View 4 Replies
View Related
Sep 30, 2009
I have lost the data of my drive having file system ext3, please tell me the most reliable softwares for data recovery, please try to tell also GUI software.
View 1 Replies
View Related
Jun 22, 2010
how to mount ext3 file system with direct i/o.on AIX has dio mount option to use direct i/o and solaris too.
View 2 Replies
View Related
Aug 29, 2011
Which file system uses Centos 5.6 by default, Ext3 or Ext4? I have installed on Ext3, it's upgrade from 5.5, but howto convert into Ext4 without damage or lost data?
View 3 Replies
View Related
Jan 6, 2011
I want encrypt my fedora file system.
How to i can encrypt ext3 or ext4 file system.
View 5 Replies
View Related
Nov 13, 2010
how can i locate an Ext2 or Ext3 file system by using the terminal?
View 2 Replies
View Related
Nov 3, 2010
I have configured a "Syslog" server on /var directory as a separate ext3 partition - to receive the logs and events from the clients & the firewall as well. The directory needs to grow dynamically as the logs are populated. Is there a way i can make the filesystem grow dynamically as and when the directory is full.
View 6 Replies
View Related
May 27, 2010
In the Folder /bin I was following along with a tutorial on Linux.org where it was showing me how to edit a file (.bashrc) nad supposedly would not Delte a File without a Warning.The file I would like to put back in the /bin Directory is znew , I am not sure what it does yet but I would like to put it back anyway. Can someone tell me how to redownload that Single File from a Linux Mirror possibly?
View 8 Replies
View Related
Jan 4, 2010
I have an Acer Aspire One running NBR 9.10. A few days ago it "went wonky", wouldn't boot and would just seem to start and then shut off before getting to the logon screen. I managed to boot from a USB stick and run check and fix in Gparted. It found a slew of errors in the file system. Unfortunately, it still won't boot, now it just hangs. I assume some of boot files were damaged.
Now I have two problems:
1. Is there a way to repair the damage? Or just wipe the disk and start over?
2. I need to get my e-mail off of the hard drive. I can mount the drive after booting from a USB stick, but the thunderbird directory is locked. Is there a way around this?
View 2 Replies
View Related
Dec 27, 2010
I'd like to know which command i should run from the terminal to know which file system (ext3, ext4, etc...) my Ubuntu runs on.
View 2 Replies
View Related
