General :: Primary Point Of Converting Dll To Lib In First Place
Apr 15, 2010
I've been looking for a way to run windows-only vst plugins nativley on linux as well as to find a linux driver for my 1394 audio interface with little luck; I would like to do so without relying on wine, and have come across an idea to work out after stumbling on a utility that converts dll to lib (called dll2lib). The idea would be to convert the dll's for a proprietary fw audio dev and dependent MS libraries and manually change what's needed to make it compatible with linux env. is this possible; will I be able to achieve source code from this? if not, what is the primary point of converting a dll to lib in the first place.
View 2 Replies
ADVERTISEMENT
Apr 5, 2010
I decided to try and spruce up Gnome and found an applet called talika. Now to install this I have to install libwnck first. I used yum but can not seem to point talika to the place where libwnck is which is troubling. So a couple of questions. Is there an easier or better source to find customizations to add to the gnome desktop or is gnomelook the best option and how do I point talika to search for libwnck in the spot where yum put it? I have googled talika F12, searched the forums, and have not been able to locate anything.
View 1 Replies
View Related
Mar 28, 2011
I recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66
View 2 Replies
View Related
Aug 27, 2009
This one has been driving me nuts for some days now:My Gentoo box which is acting as an internet gateway has two point-to-point interfaces, ppp0 (PPPoE to my ISP) and ppp1 (PPTP VPN link to IPREDator). Packets from my local network are just routed through ppp0 and now the fun part starts: I want to MARK (netfilter...) all packets originating from one specific user on that box in order to use another routing table that will contain a default route via the ppp1 interface.Marking seems to work fine as does the second routing table. But quite mysteriously (at least for me), the packets sent out on ppp1 contain the wrong source IP address, namely the address associated with ppp0.So here is what ifconfig and friends tell me:Network interfaces:
Code:
# ifconfig ppp0
ppp0 Protokoll:Punkt-zu-Punkt Verbindung
[code]...
View 9 Replies
View Related
Jun 3, 2010
I was wondering if there is any way to SSH from one computer to another and completely bypass a router or any other network infrastructure. The reason I ask is because my robot ( same one in this post ) often needs to change which wireless network it automatically connects to, however it is getting annoying to have to drag out a monitor and plug it in along with a keyboard and mouse every time this needs to happen. Instead I'd much rather just plug my laptop into the other computer, SSH in and change the network myself.
So I thought I would ask you kind people if this is possible. The robot's computer has unused ethernet and USB ports, and I'd like to use those if at all possible (and with linux, anything is possible! -- sorta). I thought about doing something with ad-hoc, but this would limit my range (in infrastructure mode I can control the thing anywhere there is internet), and is to be avoided.
View 1 Replies
View Related
Jun 12, 2010
I have a software program that when you try to install it on Centos it returns "This programs requires RHEL 4" Is there a work around to get the software to use the Centos software the same as it would RHEL 4?
View 6 Replies
View Related
Mar 12, 2010
I have just installed slackware 13 on an old machine I am bringing back into use. As I have a spare Linksys wmp54g card I would like to try to get the wireless networking in place.From reading the forum the relevant advice seems to be fairly old (2004-2006). I wonder if anyone can advise me what the current steps would be?
View 3 Replies
View Related
Aug 8, 2011
I have migrtaed from Arch, my first experience with linux for the past 2 months, to Debian and i'm currently setting up my system. I have a X61s Thinkpad with a cracked screen which i use with the ultrabase with an external monitor and keyboard. The monitor requires me to use fbset on console and xrandr for a graphical enviroment Whilst i was using Arch i used 'startx' to access openbox and placed my xrandr configuration in ~/.xinitrc but with debian i have wanted to use a login manager, Slim.
Because i am using KMS for my intel based system i don't have an xorg.conf and because i am using slim i am not using ~/.xinitrc I read somwhere that creating an ~/.xprofile file would solve this but i have not had any luck. So i am wondering where would be the best place to put the xrandr configuration?
View 1 Replies
View Related
Mar 22, 2011
If Linux is not in GUI mode, what application handles input and output?
View 6 Replies
View Related
Apr 17, 2010
I add a user in my linux machine using the command 'useradd' as shown below. # /usr/sbin/useradd -c "Non Root User" -d "/home/testUser" -g root testUser "/etc/passwd" file shows that user created with uid '517'
cat /etc/passwd
ot:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/sbin/nologin
[code]...
View 1 Replies
View Related
Jan 24, 2011
I am starting to dive into Linux after being a Microsoft geek for years. Where is the best place to start?
View 6 Replies
View Related
Sep 22, 2010
I have a program that has a GUI which I have placed in /usr/local/bin however when I invoke the program I receive the following error:
Unable to find a supported JDK or JRE version. Version 1.3.1 or higher is required. Check your installation and use +javahome to specify the JDK or JRE location
I have since installed Java into the usr/local/ directory however I am now just totally Lost! Additionally, I believe that i have tried to install Java several times with no luck.
Questions:
1) Where should java be installed to have system wide access to all programs?
2) How can I place the Java location in my $PATH? here I am going to need very easy and detailed instructions?
3) Is there a way to ensure that the location where I intall java gets updates?
View 1 Replies
View Related
Apr 12, 2011
Using a python script, I am gathering various info about all the ethernet adapters installed. For this I am parsing all the directories(each directory represent a ethernet adapter) inside"/sys/class/net/" directory.Is this is the correct place and de-facto standard for listing ethernet adapters?I am concerned about modern distros as well as a bit older ones for the presence of this directory.
View 1 Replies
View Related
Feb 18, 2010
i want to configure VNC server on Fedora 12 to be able to connect from any place how to configure it i try Google to find instruction about it but i found alot on ways to configure and they are difference what you recommend
View 1 Replies
View Related
Mar 15, 2010
I running ubuntu 9.04 server edition,I place a pci expressmodel PEX8S952 8 Port PCI Express Serial Card ,and ports are disable there is a place
View 4 Replies
View Related
Jan 31, 2011
Looking to build the first computer system from scratch and I have chosen Linux as my system. Learning about Linux is a must as I would like to get away from MS. Also, building the system will better equip me when I pursue a business venture within the next year or two.I presently take course work in accounting for a bachelor degree, but will attain another degree in software engineering, both from Herzing University. My present skill level in programming?
View 5 Replies
View Related
Dec 8, 2010
When connecting to a database in a php script, where would be the safest place to store the connect.php file. I am thinking it should not be in public_html, but is it safe in sub folders or is there a method people generally use to keep such files secure and inaccessible.
The file I mean is one including the database name, user and password etc.
View 2 Replies
View Related
Sep 19, 2011
I try to convert a doc file to a pdf file with the linux bash. I tried different ways like jodconverter, ghostscript, postscript and so on, but all didn't work as espected. Additionally I can say that I have only the bash.
View 1 Replies
View Related
Mar 16, 2011
i want to convert kb to mb and i'm wanted to use bash. if i use
"cat /proc/meminfo | grep MemTotal"
will only display in kb and i want to display it in mb.. and i want it to display like this
MemTotal : 250 mb
View 5 Replies
View Related
Oct 6, 2010
Following script name is 123.sh and I need to put this in the background if I do 123.sh -bg this will not bring me back to the prompt but echoes what ever I put (using echo hello >> /tmp/123) in to the /temp/123 file. the only way that I have found doing this is to do "nohup 123.sh &" to put this in to the background. Is this okay or is there any better way of doing this?
#!/bin/bash
# file name is 123.sh
tail -f /temp/123 | while read line
[code]...
View 6 Replies
View Related
Jan 29, 2011
i would like to find and backup all *.mp4 files from /Pictures and its sub-directories and move them to a single directory on a remote. I can find and move the files but I don't want the directory structure...just the files to be placed in the remote directory.
To find my files I use
rsync -r -a -v -e "ssh -l user" --delete --include '*/' --include '*.mp4' --exclude '*' /home/drew/Pictures/ remoteserver:/Users/drew/mp4
but this creates all the subdirectories
I also tried
find ~/Pictures -name "*.mp4" -exec rsync -r -a -v -e "ssh -l user" --delete {} remote:/Users/drew/mp4 ;
This works but takes forever
View 3 Replies
View Related
Nov 17, 2010
Which partitions should be set as primary, /, /home, /tmp, /var, /boot or any other?
View 14 Replies
View Related
Jul 12, 2011
I've mostly mp4/flv media files,i need to convert them to mp3 to put in my mp3 player but at the same time i like to adjust the mp3 bitrate to save space and maintain quality sometimes. How do i actually do that in Linux. Is there any GUI program that performs the job for me quickly ?
View 14 Replies
View Related
Sep 28, 2011
I am trying to parse a line from a file and place the values into separate variables:
input.txt:
Code:
CreateVegaFeed-20110928-before-skip-start
this is the code i have done so far:
Code:
$input_file="input.txt"
INPUT_FILE=`cat $input_file`
for i in $INPUT_FILE
[Code].....
View 14 Replies
View Related
May 26, 2011
I have a ZTE MF112 mobile broadband modem, which comes with Windows drivers and software. This software allows not only connect to Internet, but also send SMS and place calls (as in you dial number in program and when you're connected, sound goes through the sound card). As far as I know, almost any USB mobile modem comes with application to send SMS via its GSM connection.Now the question is - is there any vendor-independent software that runs under Linux and allows you to use your mobile broadband modem to turn your PC into larger mobile phone? I want at least to be able to send and receive SMS using PC + mobile modem.
View 1 Replies
View Related
Mar 13, 2011
Why is it faster to have more primary partitions when using Linux? Please give some real examples; I know some theoretical reasons but I don't understand them well.
View 2 Replies
View Related
Dec 14, 2009
One question:An OS only can boot from primary partition, not in an extended partition ?
grub 0.97
View 7 Replies
View Related
Apr 28, 2010
I have a laptop with Ubuntu 9.10 installed. It will not boot to the login screen. If I remove this HDD and connect it as a secondary drive to another PC running Ubuntu, will I be able to access the files on this HDD? There is a lot of data which I haven't backed up which I need to retreive. I don't think the hard drive has failed.
View 6 Replies
View Related
Jan 11, 2011
I'm installing the ubuntu on my new computer with 1 TB hard drive (and core i7 870 with 4G RAM), for the purpose of scientific computing. I have two questions:
1. Since I am not absolutely certain that the simulation won't use larger swap space than usual (say 3x4G = 12G), I intend to set it initially as 12G keeping in mind that I might have to extend it later. So one might suggest putting it on lvm partition. But then I read that I can maximize the speed if I put the swap at the outer track. If I mix it with the other logical volumes in the same volume group, then I don't know where my swap space is across my hard drive, isn't it? So this might suggest I make it as a primary partition. I'm stuck..
2. My current planned partition map is
/ 1G
/tmp 10G
/usr 20G
/var 5G
/home the rest
taking into account I will install MATLAB and maybe other visualization software. What do you think of this scheme?
View 8 Replies
View Related
Jul 21, 2011
If I change the primary ip address for DNS, do I need to reboot the server?
View 3 Replies
View Related