General :: Partition My Had Drive ?
Jan 25, 2011
I have the Ubuntu 10.10 netbook saved to my thumbdrive and can boot it up to where I can try it or install. When I go to install I get to the part where t asks if I want to replace windows or run in side by side. I choose side by side and then it takes me to the screen where I have to partition my hard drive. It will not give me the option to do it automatically, only the advanced manually option or replace windows is there.
So when I have to manually partition the hard drive, this is where my lack of knowledge emerges and where I need your help. I have 239 GB available. I was going to leave 189GB dedicated to windows and use 50 to run ubuntu. The part that is Japanese to me is the file format, boot, root, nfts, etc, etc. Can anyone break it down for me BARNEY style?
I have backed up all my windows data and defraged the hard drive. I just want to get this ubuntu working.
View 8 Replies
ADVERTISEMENT
Jan 26, 2011
I have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
View 9 Replies
View Related
Mar 23, 2010
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
View 1 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Nov 20, 2008
I'm at a stage where I can start using Linux for all the tasks that I currently do on Windows and am keen to make a full switch to Linux. I have played with Linux a few times over the years, installing different distros etc, but I've never set up the hard drive partitions manually. I only want to make the switch once I have a good grasp of how to configure the hard drives as I have a lot of precious data.
A question I have is that normally I would set up a small partition for the OS, then have another large partition purely for data. What would be the best way to recreate this kind of set up with a Linux file system (i.e. keeping OS and user data separate)? Where would be the best place to store a mass of data that wouldn't necessarily be associated with one particular user? I've seen about having a separate partition for users home directories, but I don't really want the data associated with one user so it would seem more logical to store it somewhere more general.
View 5 Replies
View Related
Dec 7, 2010
Lets say I have /dev/VolGroup00/LogVol00 which is a 5.8 GB ext3 partition that resides on a 10GB drive. This is just a logical volume partition, one of a few... this being the one that isn't swap, the main data.
I have a 20GB drive... I want to move the LogVol00 to it, and it is /dev/sdb. I partition /dev/sdb1 to be 8192 MiB in size in gParted.
I move as such:
dd if=/dev/VolGroup00/LogVol00 of=/dev/sdb1
The operation finishes with no problems.
Fsck reports clean... so... I run:
fsck -l /dev/sdb1
A few small errors pop up and they get fixed.
My free space remaining, as expected, is 5.8 GB.
I go into gParted and resize the partition to 15GB in size, still working on the 20GB drive.
It does so, the operation completes.
I have what I want: the partition was taken out of LVM, data was retained, I have no issues resizing it. Additionally I tried writing random junk to this new filesystem to test to see if it's broken, and also deleted 3gb of files already on it with no problems.
I just want someone to look this over and tell me if they see any problems with what I've done. I've tested this twice so far with success each time. Is there a better or easier way to do this? I do not want to keep LVM for various reasons. By the way, you might be wondering why I made the partition 8GB for an almost 6GB system. Because the first time I did it, I put down a number that was too exact and it didn't work. Overestimating to 2GB fixed the issue - I'm guessing this is probably due to block size.
View 5 Replies
View Related
Nov 2, 2010
I'm currently running Xubuntu 10.04LTS as my main distro, but would like to also run Fedora 13 on the same machine.Therefore, I'm more so just after a bit of steer of the best plan of attack to achieve this - best procedure to partition the drive (80gb / i686) and install Fedora etc.
View 1 Replies
View Related
Sep 21, 2009
I'm trying to install Ubuntu 9.04 on an HP Compaq dc5000 uT with Windows XP Pro. service pack 3. Downloaded the ISO file and burned a CD with Infra Recorder. The demonstration version works ok as far as I can tell, this is my first try at using any form of Linux. If I can get Ubuntu to work I plan to get rid of Windows completely. I'm stuck at step 4 of the install process, all options in the partition window are dimmed, nothing is clickable.
View 10 Replies
View Related
Mar 21, 2009
Computer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
View 9 Replies
View Related
Nov 2, 2010
I want to move the entire contents of my backup HD to another HD. I could manually copy everything, but I was hoping to clone the entire backup hard drive. I tried to do it with Gparted, but as far as I can tell, I can't clone between drives, only between partitions on the same drive (I've done that before). So how can I do this in Linux? I think one of my drives came with a cloning utility on a CD, but I'm not sure I still have the CD.
View 2 Replies
View Related
Oct 4, 2010
Is it possible if I am only using ext3 and no LVM or anything else to re-size the partition into another physical device? I am pretty sure the answer to this is no but I was still curious as I am facing a full 1tb disk and need to add a new drive and unsure how to do this due to shared folders existing on the old drive and no way to actually expand them without linking in new files or something.
View 8 Replies
View Related
Jul 11, 2011
i am putting a larger drive in my laptop, i have linux mint 10 KDE setup with all the software i need and running just the way i like it. is it possible to actually copy the entire partition to a external drive then place the partition back into my laptop with the new drive in it, and still have it all setup the way i had it?
basically so i dont have to reinstall everything and set it up again.if this is possible could you please explain how i can do it in the simpliest terms at all please.
View 6 Replies
View Related
May 17, 2011
I am using a new install of Kubuntu 10.04 LTS. My system is a 64-bit AMD desktop.
I use a small partition for my entire Kubuntu install, and use separate, larger partitions for my media and work files.
I opened up Dolphin (my KDE file manager) via GUI, navigated to my media partition, and attempted to create a new folder by
right-click->
Create New->
New Folder-> etc
The Create New in the menu is ghosted out, as if I have no permission to access it.
How can I write files to the drive?
View 14 Replies
View Related
Nov 13, 2010
What is one of the best ways to partition my hard drive? It's 110GB. I will be installing Fedora with XFCE but I want to also install other linux distro on the same laptop to experiment and I want to have the iso on the hard disk and install them from the hard disk. I'm not sure how many distro I will try but I could remove the ones I don't like.
View 8 Replies
View Related
Feb 23, 2011
I'm installing RHEL 4.x to a hard disk that already has windows 7 enterprise installed. I would like to dual-boot both the OSes. The hard drive size is about 220 GB (of which windows 7 occupies about 50 GB).Now, is there any free and friendly tool that I can download to partition this drive ?RHEL comes with a text mode (disk druid) to partition and I could not figure out how to resize the existing windows partition. So, I'm assuming that I need to abort the linux install now and proceed to boot from another CD that contains a good partitioning tool and then later resume boot from RHEL install disk.Also, what should my partitions look like ? What size should they be ? The system is a new LENOVO with 4 GB RAM on a i5 core processor.I know that I will need atleast 5 partitions. right ?1) /boot2) /3) /home4) swap5) /var
View 2 Replies
View Related
Apr 3, 2011
I have the following "setup:"
iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]]
|
|
|[code]...
I routinely use the firewire drive to boot MAC OS X.However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd).My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)...Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.
View 1 Replies
View Related
Aug 22, 2010
I've resisted the urge to post for as long as I could. I use these forums quite often in finding answers to the numerous linux questions that I've had & found it to be a great resource. For some reason after an innocent reboot of my Fedora 12 Core system, GRUB decided it would no longer load the O/S. I was just getting a flashing _ in the top left of the screen. I thought there must be a problem with the partition table & have used the systemRescueCd to run testdisk (I have made a copy of the disk first to an image file using dd - don't worry I made sure I got the commands around the correct way!).
testdisk shows that I have a partition which is bootable & Primary, which appears to be the grub partition (I can list the files in test disk). However when I search the disk I get the following after it has found a couple of partitions. (it is an 80Gb disk)
[Code]...
View 5 Replies
View Related
May 30, 2010
I have an ecryptfs partition on a usb drive, system runs Debian squeezeWhat I'd like to have is that when I connect the drive it will be auto. mounted and I'lleither have to enter the passphrase or it will already be in the keyring (even better).It seems ecryptfs can auto-mount a directory but I want to auto-mount an entire encryptd partition. Is this possible?.Also, can I have another encrypted directory, say ~/Private, at the same time or can ecryptfs handle only one at a time?
View 3 Replies
View Related
Jun 30, 2010
I am using Asus eee PC model 1001P and I am running ubuntu netbook remix on it. I have a 160 GB hard drive. When I was installing ubuntu I assigned only 50 GB for it, thinking that I will use the remaining partition for windows. But right now after using UNR, I don't want to use windows at all. Is it possible that I can assign the remaining 100 GB unassigned partition back to Ubuntu without reinstalling the whole operating system again?
View 4 Replies
View Related
Jan 6, 2010
I downloaded partition wizard to get rid of a linux partition on my hard drive. after I fixed my mbr I used partition wizard to delete the linux partition and resized c to take up the rest of the space, partition wizard is reading my c drive as unallocated and also windows is not detecting my recovery partition at all... what can I do to fix this. I fear that even though my recovery partition exists that it may be of no use to me if windows does not recognize it, and how can I format the unallocated space with out loosing all of my data?
View 2 Replies
View Related
Aug 2, 2010
I need to make my root partition bigger to add more free space. Is there a Linux version that will fit on a small usb flash drive that has the tools I need? I plan to boot a Linux distro from a flash drive in order to resize the partition.
View 1 Replies
View Related
Aug 30, 2011
is there a way of sharing an ext3/ext4 formatted partition on an external USB drive between different users (uids) on different Linux machines without creating a group for this purpose, setting the group ownership of the partition to this group and adding each respective user to the group on every machine?This would mean that I need to have root privileges on every machine... which I may not have in some cases.I'm using the partition to store the code I'm developing on Linux and I would like the option to be safe... if possible.I could use a vfat partition but then I have no control of the rw rights + I cannot develop directly in the dir: I would always have to tar.gz the directory, extract, work, tar.gz, copy to the external drive.
View 2 Replies
View Related
Apr 8, 2010
I've got an external hard drive with one large data partition on it. I also have four computers to connect it to (individually, not at the same time). Three machines are running Slackware and one is running Ubuntu 9.10. I need to be able to just plug the drive into whichever machine, mount it (preferably to the same location each time) and not have to worry about user permissions and such. Do I just chmod 777 all the files and folders or is there a better method for different 'users' to access the same partition? And how about mounting to the same location each time?
Now the second part of my question I'm pretty sure I'm not able to do but just in case..... is there any way to encrypt the information safely and make it compatible with a Windows XP machine?
View 4 Replies
View Related
Feb 3, 2011
I am keen to start using Ubuntu and have installed it on one of 4 partitions on my new 1 TB external HD. I got to the reboot stage where I was expecting a new boot screen where I could decide to use either XP or Ubuntu. But there is no mention of Ubuntu just XP and the volume I installed Ubuntu on has disappeared. I can find the other 3 volumes on My Computer.
View 3 Replies
View Related
Jun 22, 2011
I installed Redhat Enterprise 3 on one of my servers. In my haste I didn't properly partition both Hard Drives and only properly partitioned one of them. Thus now I have
/dev/sdb1 478711768 137858256 316536328 31% /
/dev/sda1 101089 15346 80524 17% /boot
Where /dev/sda1 is actually a 80 GB hard drive. Is there anyway I can safely and easily repartition the unpartitioned space without causing a huge mess? I have a very important Oracle database on /dev/sdb1 and thus I want to be able to back it up on the second disk. I can create a partition on that drive?
View 2 Replies
View Related
Jan 18, 2010
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added):
h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
[code]....
View 1 Replies
View Related
Jun 14, 2010
I have the following /etc/fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
[Code]....
This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.
View 1 Replies
View Related
May 12, 2011
I want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
View 1 Replies
View Related
Jan 22, 2010
one would have to exclude certain folders / directories but would the backup be possible if the system is up and running in its native "live" state ? Which directories could be excluded ? Does swap need to be turned off ? I would like to make incremental backups on a separate partition of the same hard drive. I will endeavour to backup the MBR/ Partition table using dd.
View 6 Replies
View Related
Mar 13, 2011
I formatted a 16GB USB flash drive via right click. Then I ran gparted and got as far as this [image attached]
Do I choose Primary Partition or Extended Partition for this second partition?
View 4 Replies
View Related
