General :: Mounting Restricted Share For All Users?
Jan 25, 2010
I have a NAS on which I created a share with CIFS that has restricted access (that is: you need a username and password to access it). The reason is that I don't want any user in the network to mount this share.On one computer I have Bacula installed to run backups. I would Bacula to store the backups on the NAS share. So I mount the share in fstab. Works fine but the share directory is not read+write for all users but only for the root (since the mount was done for the root).The line in fstab:\readynasackup /readynas cifs user,rw,password=thePassword,username=bacula,umask=017 0 0How can I have Bacula (running as user Bacula) get read+write access to the directory representing the share?I tried to remove access control to the share but the directory representing the mount remains readonly...
View 1 Replies
ADVERTISEMENT
May 22, 2010
I am running an updated Lenny. Just discovered that as user I am able to add new users via gui:
System > Administration > Users and Groups.
I was under the impression adding new users was restricted to root. Is this is a bug, and if so who do I report this to?
View 1 Replies
View Related
Apr 21, 2011
I want to configure a remote internet facing server as git server. I would like to restrict access to the server to a few systems (access is restricted to select computers, not users). I first thought of using ssh key, but the key can be copied to another system hence that alone is not sufficient. I am having a dynamic IP, so simple IP based firewall blocking is also not possible. I was thinking about the possibility of using both SSH Key and IP based access. Is it possible to update the firewall rule whenever my ip gets changed?
View 6 Replies
View Related
Feb 3, 2011
I have a box that's used as an SFTP server. All users have restricted shell so they can only use SFTP to send and receive files. But it makes it hard to have them change their passwords. I thought that if we had a web page set up where the user could enter their username, old password, new password and confirmed new password, that this would be the easiest solution.
View 1 Replies
View Related
Apr 8, 2010
I'm trying to automatically mount a windows share in a Fedora 12 instance (FC12).When I manually mount things work:mount -t cifs //nas01/servers -o username=guest,password=myPassword /mnt/nas01/serversIf I update /etc/fstab with the following://nas01/servers /mnt/nas01/servers cifs username=guest,password=myPassword 0 0Nothing happens after reboot. The thing that has me baffled is after a reboot if I run:mount -aThe share is mounted.
View 3 Replies
View Related
May 11, 2011
I need to customize linux kernel root file system for embedded linux system. During compile time, for root file system I am able to create different user/group ex: "gnumuzic/Muzic". But I want to give access to group "Muzic" to some folders like /dev/nexig during compile time.
View 1 Replies
View Related
Sep 1, 2010
I'm trying to mount a Windows Server 2003 share in Fedora 13. With Fedora 8 and with RHEL 5.5 this works properly, but not with Fedora 13.
The mount point I'm using is /usr/eg
The symptoms are: Nautilus (the file browser) does not display the mount in the places or tree as a mounted drive. Using the file broser I can browse under file system down to the files on the server Programs cannot find the files under /usr/eg ie the files on the server.
Here is my fstab entry:
//192.168.1.40/eg /usr/eg cifs auto,user=<user>,password=<password>,rw,uid=500,gid=500,file_mode=0774._netdev 0 0
View 1 Replies
View Related
Jun 8, 2010
I am having issues mounting a share on a Windows 2008 Server from all of our Redhat 4 machines. I am trying to back up files before wiping and upgrading them to 5. I will try and post as much information that I gathered after trying different things. I am a newer hire for this network and a Linux newbie.
The scenario is this:
1. Windows 2008 Active Directory.
2. Redhat Enterprise 4 machines
I have root access and I tried entering at the terminal:
" smbclient -L "servername" -U "username"
get the "password" prompt I enter my password and get:
"session setup failed: NT_STATUS_ACCOUNT_LOCKED_OUT."
I check event viewer on the 2008 box and last week was seeing:
Event ID: 4625
Keywords: Audit Failure
etc, etc
"Account for which Logon failed:
Security ID: NULL SID
Account name: anonymous
Account Domain:MYGROUP
Failure Information:
Failure Reason: Uknown user name or bad password
etc, etc
Now the last couple of days the audit failures have not shown up on the 2008 Server box even though I attempted to log in.
The end users used to just use Konquerer smb://"servername"/"share" and it worked but for some reason starting last week this no longer works. Nothing was changed that I know of, this network is in a sealed classified environment with no external access. All additions to the network are monitored and no unapproved software is installed. The lab is in a vault type environment and only a few people know the combination and alarm pass codes so no chance of somebody adding stuff without me knowing it.
I would think with the locked out message it was an issue with my user account but that works fine on the Windows side so I tried my Linux credentials with no success when trying to mount the directory.
Is there something anybody can suggest Linux or Windows side to check? No user accounts work connecting to the Windows share.
p.s. I am aware the above command is only to see the Windows shares but i get the same thing when I just try and mount using CIFS or SMBFS.
View 6 Replies
View Related
Feb 9, 2010
It's easy to have multiple user accounts on one computer and even switch between accounts without logging off. It is also possible to have more than one display connected to a single computer. Is it possible to have one multi-core computer be used simultaneously by two users in their own accounts? Is there specific hardware required (to allow keyboard and mouse distinction for each user) and software configuration?
I know you can setup remote connections on windows that allow you to open and use a second user account without bothering the first user, but how about working locally on the same machine, essentially removing the network delay of remote desktops? What OS supports this? Linux Ubuntu? Windows 7?
View 4 Replies
View Related
Aug 18, 2010
Noticed this in both Ubuntu 10.04 & now Mint 9, both Gnome. I didn't have PCLinuxOS2010 KDE installed long enough to experience it so I don't know if it's a property of Linux or part of Gnome.I have two users, both myself and my wife, and I noticed thatn I mount an internal SATA drive I can only see/access it under the user that mounted it. In order for the other user to see it I need to un-mount the drive. Drive is a 1TB SATA formatted NTFS.I can't imagine this is normal and the 2nd drive is shared for pics/data/etc. Strange quirk is that my install is on a partitioned primary drive, 320gb, that also has Windows on it so the OS must access the drive in order to boot - both users can see the mounted 215gb Windows NTFS partition simultaneously.Is there a setting that needs to be changed or is this normal?
View 8 Replies
View Related
Feb 23, 2011
OK, I have a very simple question.
Is it possible to share one folder between 2 users with full RW access without sharing every other directory they own outside that folder?
This seems straight forward enough to me. I've just asked it on #linux at irc.freenode.net but when we tried it became apparent that no one there could tell me how it was done.
View 10 Replies
View Related
Jan 9, 2011
want to made 2 users in samba by which windows machine we access share, say user1 has read,execute permission, user2 has read write delete update full permission. we have done user1 configuration as premia user. we need your guideline for user2
we change the smb.conf file
# less /etc/samba/smb.conf
[global]
[code]...
View 2 Replies
View Related
Dec 27, 2009
I've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED".If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.
The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine previously will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling.
View 8 Replies
View Related
Mar 10, 2011
Winxp and Win7 - conencting to a Samba server.
Everything is working fine except for one thing .
To best explain this problem .........
Share name - "admin-public"
Everyone can access it.
Everyone can create new docs and edit / save them.
BUT - only the originator can edit / save.
Everyone else has read only access!
View 1 Replies
View Related
Aug 29, 2009
Recently i share the file with nfs share in fedora 10 , but my problem is that is unable to mount it from fedora 11 . i didnt get any error while starting the nfs service in f10 .but still i cant mount it from f11 machine.
View 2 Replies
View Related
Jul 19, 2011
When ever i try to mount my nfs share i got a msg mount: 192.168.10.1:/home failed, reason given by server: Permission denied
And my log file show the message Jul 19 04:33:25 localhost mountd[28294]: mount request from unknown host 192.168.10.1 for /mount_rhel/Server (/mount_rhel/Server)
My Exportfs file
/mount_rhel 192.168.10.0(rw,sync)
i try to reinstall nfs but the problem is still same. i also checked all the daemon is running in backgroup like portmap , mountd etc.
View 4 Replies
View Related
May 12, 2011
I am attempting to mount an NFS share that has been setup on a Windows Storage Server 2008 (R1). Initially, I could not even mount the share, though it would show up using "showmount -e <server_ip>". After adding the "ANONYMOUS LOGON" user to the NTFS permissions and granting the "Full Control" permission, I was able to successfully mount the share and read from it. However, I cannot write to it. The NFS share is set to allow anonymous access, UID 0 and GID 0. The appropriate host is listed in the NFS Share Permissions with Read-Write permissions, and ANSI encoding. Root access has also been allowed. I also tried granting the "Everyone" user full control in the NTFS permissions as well. See screenshots and console quote for clarification if needed.
View 1 Replies
View Related
Sep 5, 2010
I am trying to install the net install version of 5.5 from an NFS share that I setup with freenas. I have fully functioning DNS (hosted on freebsd) and can mount the iso share on another centos box with the command mount [URL] on that machine.
but when I go to do the same thing in the centos net install I get an error stating simply: "that directory cannot be mounted from the server".
in the settings I have the following values:
NFS server name: nas.example.com
CentOS directory: /mnt/iso1
NFS mount options (optional):
View 1 Replies
View Related
Jun 12, 2009
Usually you put external mounts in the /mnt folder, then link there with a symbolic link if you want access from somewhere else. By keeping all of your mounts in /mnt its easier to manage them as your system and ability grow.
You need to make mounts as root. Mounts take the data in the target and put it on top of an existing folder. When you mount something on top of a folder whatever was there becomes invisible until you remove the mount on top of it. If there is a problem with a mount and it does not work, any writes to the mount will go to the folder underneath, and any data you expect to read from there will not exist.
In making a mount you should realize that the char requires an escape char in bash to show up in the final output to the command. The escape char is also . Therefore to show \ in a Windows command, you need to type \\. Also, spaces must be escaped once with .
Howto:
You should substitute your ip or name for 10.10.9.5
Reminders: Make sure your Windows folder is shared read/write if you need to write to it.
You probably want to change permissions on /mnt/WindowsDocuments to 777
Tips:If you want a link from your desktop to your Windows "My Documents" folder you can now do this:
$cd ~/Desktop ln -s /mnt/WindowsDocuments WindowsDocs
This will make a symbolic link to /mnt/Windows, and if you execute: ls -l ~/Desktop you should see the links information in the response
Finally, if you want to keep a local backup of what's on the windows box in a local folder you could do:
The ~ char is shorthand for /home/<uername> and represents your home folder.
The result of the rsync command is to make a copy of WindowsDocs (which points to your mount at /mnt/WindowsDocuments which is linked to your Windows machine shared 'My Documents' folder) and put it into ~/WindowsDocumentsBackup
As always, make use of the man command if you get confused or the info command for more detail. ie man rsync
View 1 Replies
View Related
Jan 12, 2010
Hi, I have a server at my home which is a Ubuntu 9.1 which is setup as a NFS server using NFS v3. I am also using DYN DNS to access my home server remotely from another location using SSH. Everything works good, I can sucessfully log in to my server from my laptop via SSH, however my problem mounting my NFS share which consists of appx. 300 mp3 files. My question is:
1 How Do I Tunnel a NFS share through a SSH tunnel?
2 Is there any other configuration? needed to be done to the router?
3 is there anything needed to be configured to the server or my laptop?
4 Manual mounts is fine for me I don't care about automounting.
I just want to be able to mount the NFS share via the SSH Tunnel and play my music and access other files from my server.I just need the steps to set up this connection.
View 2 Replies
View Related
Jul 20, 2010
In Nautilus, I can find the share under Network which I want to mount. When I double-click on the desired folder, I was prompted for a username, domain and password. However, I could not log in; there was no error messages, but Nautilus kept prompting me for my username etc..It would seem like I've entered the wrong details, but I've used a Mac OS to access the share using the same wired network and I had no problems doing so.So what could be the problem? Am I missing some setting? Or is the Windows share setting denying access to Linux systems?
View 9 Replies
View Related
Aug 4, 2010
I have been looking into how to get Nautilus to emulate the windows "map network drive" feature.
I have found several howto's that use various command line utilities to try to do this, however they tend to be like trying to use a sledgehammer to fix small dents.
When I connect to a share server, Nautilus puts a directory on my desktop that only Nautilus seems to be able to see and use. I would like to be able to access this directory with non-Nautilus applications.
View 5 Replies
View Related
Oct 28, 2010
I have a server, with a static IP of 192.168.1.17, that is running Ubuntu lucid sever edition and that exports some shares per NFS. Here is its /etc/exports:
Code:
/media/Share00 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
/media/Share01 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
/media/Share02 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
/media/Share03 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
[Code]....
However, autofs does not work: the /msrv directory appears and disappears when I start and stop autofs; but when I enter "cd /msrv" followed by "cd Share05" in the terminal, I get the "bash: cd: /msrv/Share05: No such file or directory" message after the second command.
View 9 Replies
View Related
Mar 20, 2011
I have a security camera (Mobotix M12) which can save video to a Samba share, but it's unable to mount the share. So from another system I am trying to mount that share and it's failing.
The problem is not firewall, as no problem messages, and the Samba log is vacant.
When using this command, and I give the password:
In dmesg on the client I get:
And on the server I get nothing in dmesg or samba logs. And no logfile is created for the client machine in /var/log/samba. I can ssh over to driveway on the server just fine.
I used to use Samba, although it's been a long time, since I discovered sshfs.
View 2 Replies
View Related
Feb 2, 2010
I have created a samba share and mounted the share with /etc/fstab on another machine. This share is supposed to be a fully public share i.e. i have different share where different permissions are set but on this particular share i intend to have full read write and execute rights to all the users on my mounting machine.
The problem is that I get only owner and group rights for write on directories that i create due to which all my users can create files in my mount directory but when they create a folder they cannot create any file inside that folder.
View 4 Replies
View Related
Mar 4, 2011
I am trying to mount dosbox on a share on a remote computer. I did it in Win XP without any troubles. In Ubuntu it does n't work.
First I made the map in media and connected the share. The share works fine, but I cann't mount DOSBOX. Then I put the share in the /home/user directory. Share works fine! But dosbox does not mount.
On mount c /home/user/mydrive
I get: Drive C does not exist.
I think that the permissions are not correct.
View 3 Replies
View Related
Sep 2, 2010
I'm having some trouble mounting an NFS share on a VM host (both CentOS 5.5):
-------------------------
SAN/NAS BOX (NFS Server):
-------------------------
/ filesystem on VolGroup00/LogVol00 = 7.6GB A 20GB filesystem on vg_vm/lv_vm1 is mounted at /srv/vm1 A 100GB filesystem on vg_vm/lv_data1 is mounted at /srv/data1
Output of 'df -h' (extraneous stuff removed):
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
7.6G 1.8G 5.5G 25% /
/dev/mapper/vg_vm-lv_vm1
20G 173M 19G 1% /srv/vm1
/dev/mapper/vg_vm-lv_data1
99G 188M 94G 1% /srv/data1
View 3 Replies
View Related
Jun 15, 2011
I am posting the o/p of /etc/fstab and /etc/mtab...Currently i am the only user but if i add one more , how can i give that user the right to mount any partition
View 7 Replies
View Related
Apr 2, 2011
I have two remote systems which I have fstab entries for on the local system. I have them set to noauto, because mount fails during boot for some reason, but that's not the problem. For years I've mounted them in rc.local.
The problem is after I recently reinstalled Debian, when I mount them manually it always asks for my user's password. I've copied my user's pub key from the local to the remote system and put it in the user authorized_keys file (not root), like I always have. But it still asks for a password, and so fails to mount in rc.local.
View 2 Replies
View Related
Feb 10, 2009
Following instructions that I received from the Fedora 10 Guide, I recently edited my etc/fstab file so that I could auto mount my Windows share. It worked the first time, but when I rebooted, I noticed an error saying that Linux could not not unmount the cifs shares. Eventually it did reboot, but now I cannot mount the share at all from fstab. When I run the command #mount -a and then #mount, my share is shown to be mounted although I cannot access it and there is no link to it on the desktop like there was the first time it mounted. I basically want my Windows share to be permanently mounted with read/write permissions. My Distro is Fedora Core 10 64 bit. How can I resolve this issue?
View 3 Replies
View Related
