I am wondering if anyone knows how to enable NTFS compression using Paragon NTFS 8.1 Enterprise?
The Professional version comes with a utility mkntfs which allows you to set compression as default for all files, but the Enterprise version is apparently meant to be 'fully featured' and support compression, so how do I enable compression on a drive/folder/file?
I haven't seen this addressed anywhere & quite frankly a "google" wasn't any help. So I pose the question here.
If I, under M$, turn on the NTFS compression, will that drive still work under LINUX?
My thought is that it won't as I haven't seen any control in LINUX for it.
I can mount the NTFS in read only mode, but i need write access too. how can i mount NTFS partition in read/write mode..?
View 12 Replies View RelatedI want to enable Advanced NTFS-3G support (permissions and users) automatically from the fstab entry.
View 1 Replies View RelatedOn a clean install of Arch linux I edited fstab to be like so :
Code:
/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
I have installed Redhat Enterprise Linux Server 5 on my laptop. I have also installed Windows 7 Operating system on the laptop. I want to access windows 7 created ntfs partitons on RHEL 5 server. I tried installing the following rpm's on the rhel5 for accessing the ntfs partitiins.
1. fuse-2.7.4-8_12.el5.i386.rpm
2. fuse-devel-2.7.4-8_12.el5.i386.rpm
3. fuse-libs-2.7.4-8_12.el5.i386.rpm
4. fuse-ntfs-3g-2010.5.22-1.el5.rf.i386.rpm
[code]....
Reproducible with Firefox 3.6.6 (installed from Ubuntu 10.04 repository), on Dell D620, Ubuntu 10.04 Steps to reproduce:
1) start Firefox from command line "firefox -P"
2) create new Firefox profile on NTFS volume (mounted with NTFS-3g)
3) add NoScript extension (through extension manager Get Add-ons), restart Firefox as suggested
4) extension is not added to Firefox In case at step 2) profile is created on Linux volume, at 4) extension is added to firefox.I'm not 100% sure, but I think this bug is related to Firefox 3.6 update (no problems with Firefox 3.5). I did not make proper investigation, but I have feeling same problem applies to Thunderbird 3.1.This issue does not allow to share Firefox/Thunderbird profile on dual boot machine (Ubuntu/WindowsXP).
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
View 3 Replies View RelatedI am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
View 4 Replies View RelatedJust installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?
View 2 Replies View RelatedAre there risks of data loss when writing on a NTFS using ntfs-3g, and will windows have trouble reading from that system later?
View 2 Replies View RelatedAbout dual boot system with winxp and lenny.
Storage information:
1st primary:SG 160G ATA 100
1st secondary:WD 160 ATA 133
SATA:WD 1000
2nd primary:DVD
2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup:
1.Partition list:/boot,/,/home,swap
2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying.
I solved the problem by the following way.
1.Boot with windows xp's install CD and use fixmbr on (hd0).
2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1)
After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0).
3.Reboot and Press F8 for a boot menu then I can select which disk to boot.
windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
View 8 Replies View RelatedFirst off let me say that I love working with Ubuntu. It's a great OS to learn Linux on. Now on to my problem. I have a laptop that dual boots. Ubuntu 9.10 x64 and Windows 7 Ultimate x64. Been working just fine. I was using NTFS-Config to auto mount the Win7 partition during startup of Ubuntu. It has been running fine. I am able to move files between the linux partition and the NTFS partition with no problem. Now I've come across a problem. I big problem. Just this week I installed VirtualBox onto Ubuntu. I started creating virtual machines. 6 in all (3 Win 2k3, 1 2k8 and 1 Win7). I was saving the virtual machines to the NTFS drive as this was by far my largest drive. I used a directory titled "virtualbox" under the c:/users/public directory. This setup was working great. Was able to get my vm's patched and up to date. Created several snapshots. Basically I was a happy camper.
Last night I booted into Windows 7. OS started fine. I was just surfing the web. After that I rebooted the system and entered Ubuntu and started Virtualbox. I tried to start a vm and it complained that the virtual harddrive was missing. I checked to make sure that the path was correct for the virtual drive and discovered that the entire virtualbox directory that I created on the NTFS partion was gone!!! Everything else was in place and intact including music and large video files that I had downloaded to the Ubuntu partion and moved the the NTFS partion.
I save these virtual machines???? Should I abandon using NTFS-Config. This is somewhat critical since I had took sometime to create this test lab and to have it disappear from simply booting into Windows 7 is crazy.
I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command
#modprobe ntfs
but it say FATAL: Module ntfs is not found.
Can mount.ntfs and mount.ntfs-3g reside simultaneously?
Whilst accessing an external NTFS drive mount.ntfs takes up a lot of CPU. I am not sure if its mounting the drive using mount.ntfs or mount.ntfs-3g? How do I find out and if they coexist how do I make the default mount drive ntfs-3g?
I;m using RHEL5, i have a problem with my wireless lan card, my laptop wireless cant be enable , i always show a inactive in the network configuration property, i know it detect in my box code...
View 10 Replies View RelatedCan someone explain the difference between ntfsprogs and ntfs-3g? And which one is better?
Is ntfsprogs uses ntfs-3g or they have no relation?
I have a massive ZFS array on my fileserver. Whenever a disk reports bad sectors to smartmon, I order a replacement, and I shelve the failing one.
And by "shelving the failing one", I mean that I give it a low-level format if applicable, or a destructive badblocks run to possible claim spare sectors to replace the bad ones, then use it to dump my DVDs (and lately BluRays) on, so that I can use it with my HTPC and bring it with me when going to my friends to watch movies. It's just a really easy and portable way to watch movies with XBMC. I have the stuff on pressed discs already, so I'm not dependent on their reliance, and the dying drive just gets a hospice life serving as quick-access media storage. Keeping in mind Google's reports that drives are 39x more likely to die within 60 days after their first SMART error, I'm expanding that period by the fact that these drives mostly remain on their shelves and are only plugged into the SATA bay once or twice every year.
I'm just saying this to make clear that I'm not confused about these drives dying, and I'm not looking to elongate their lives ;)
So. Sometimes these drives, after a badblocks run, simply claim fresh sectors from the spare pool, but sometimes there aren't any left, and I face the fact that there are bad sectors in my FS. That's not a problem if you use one of a set of linux filesystems, as mkfs.* often takes a badblocks list as input. But seeing as I sometimes bring a drive or two to my girlfriend's (Mac) or one of my friends (usually Windows), I've decided to use NTFS for these things. Up untill now, when a drive had unrelocatable bad sectors, I've just written data to it, re-read it, and files that were bad were put in a "BAD_SECTOR_FILES" folder on the drive.
Sure, it works, but it would be really nice to be able to just mark those sectors bad instead. It's a lot of hassle the other way around.
So I read some posts, of which most quickly switch subject to the often accurate one of "replace your drive!", and some suggest spinrite, but really, I don't see why I should pay that much money for such a trivial task.
The alternative is to use ext3, but I'd like to hear if someone knows how I can feed badblocks output to mkfs.ntfs, so that the bad blocks aren't used. Or if there are other tools (I could use Windows in a VM) that do the same. I'm confused about chkdsk, it seems the bad sectors thing is FAT only?
I use linux for work (perform c++ calculations, latex) and I use windows for entertainment (dj software, tablet functionality). I'd like to access (read and write) to my linux partition from windows.
I heard coLinux is an answer but it will probably make things complicated.
So far i heard that the only problem with using NTFS for linux is it's slower. This is not good for work.
I was thinking partitioning my drive so that my home directory with all the config files is NTFS and the root and work directory is ext4. any drawbacks to that?
I have linux9 & windows xp dual boot.I want to access ntfs partition in linux9 please give me suggestion for same.
View 4 Replies View RelatedOn my computer on the first disk /dev/sda was installed win2k system bootable with
native win2k bootloader. I created imges of that partition using Ghost4linux na Clonezilla. Images were placed on the second computer using sshfs. For all this tasks i used PartedImage LiveCD.
I removed old partition and created a new ntfs partition on the same disk. When I used GParted or native Win2k partitioner the partition I get was smaller: the difference is a few bytes. Finally I used the Linux fdisk. Now the size was OK, but after restoration win2k was unbootable: I tried to recover the win2k but it was even impossible to locate a system on the partition. So I tried to move all the partition at the very beginning of the disk. Now at least I was able to mount (under Linux) the partition. But again win2k was unbootable and unrecoverable.
It seems for me that the partition is missplaced. According to Ghost4Linux the partition begins with an offset 0x56. I suspect that it should be rather 0x80.
ntfs-3g /dev/sdb1 /media/sdd7 ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 6 has no FILE magic (0x0) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
how to mount an ntfs formate in linux??
View 6 Replies View RelatedI am facing an issue in linux El4,I want to mount NTFS USB Hardisk to linux, I tried to mount but i got fs related error, after I have installed ntfs-3g, then i tried to mount through this command (mount -t ntfs-3g /dev/sdb1 /mnt/usb) but now i getting Fuse error, is there any possibilty to mount NTFS disk to linux EL4 without install Fuse.
View 3 Replies View Relatedconverting the ntfs to ext3.
View 9 Replies View RelatedHow can I access NTFS in linux?
My distribution is centos 5.5.
how to access fat and ntfs partition in redhat linux 5
View 2 Replies View RelatedI am using Red Hat 5.5.I am trying to mount a USB Drive that is formatted as NTFS.Red Hat is saying it can not mount NTFS drive
View 2 Replies View Related
