General :: [mod_edit]foreign Language Removed[/mod_edit]?
Jun 16, 2010[mod_edit]foreign language removed[/mod_edit]
View 14 Replies
ADVERTISEMENT
General :: Key Stroke Combinations For Foreign Language Accents In Office?
Apr 12, 2010In Windows Word there are combination key strokes to get language accents inserted in the text. How do you get the same thing in Office? I am trying to use foreign phrases in an English document.
View 2 Replies View RelatedUbuntu :: Terminal Is Stuck In A Foreign Language?
Feb 16, 2011Some time back I posted a question about using a Greek keyboard since I'm trying to improve my limited Greek. Someone suggested a way of switching between the English and Greek desktop for Ubuntu. I tried that but it didn't work so well so I removed it. But I just tried to use the Terminal to install something and it's all in Greek!!! Now while I can read some of it my skills are not that good and I need it back in English again... Quickly actually! How do I go about removing the Greek from my terminal? Everything else on my system is in English so I can't figure why the terminal is stuck there.
View 9 Replies View RelatedUbuntu :: Language Support System In English / Foreign Locale
May 3, 2010I only want spellchecking, calendar and currency to be typical for Poland (this is where I currently live), Ubuntu itself (interface, applications, manuals) should be in English - I don't understand Polish well enough.In 9.10 I used to check Polish spellchecking (translations were checked for install automatically but you couldn't tell unless you chose another language and then Polish again) and uncheck the translations. It allowed for setting locale (calendar/currency) to Polish and also keep the spellchecking. Now it's buggy: I can do a fresh install of Ubuntu but can't set Polish spellchecking, calendar (it starts from Monday), currency (it's PLN/zł) and keep the system itself in English. What I do wrong?
1. Fresh install
2. System -> Administration -> Language Support
3. Language -> Install / Remove Languages
4. Find Polish and select ONLY: Spellchecking and writing aids
5. Text -> Display numbers, dates and currency amounts in: Polish
Confirm, reboot and... Bump! I've got Polish translations in several places, e.g.:If I upgrade any software, it is in Polish. Firefox (or Namoroka) locale changes to "pl,en" and its plug-ins are in Polish by default.
After I uninstall Polish translations (and leave spellchecking and writing aids as it was) there's a problem with locale (Polish locale is removed along with translations), besides, system doesn't actually change back to English and newly installed applications either crash with errors or install in Polish.
Programming :: BASH - Renaming Multiple Files In Foreign Language?
Mar 6, 2011I have this cool bash script that I worked hard on. But it broke down when it can across files that had non-English characters. Another small problem was getting it to descend into a directory. If it renamed a directory it would not descend into that dir to rename the other files. I would have to run the script twice on the same directory.
Here is the script:
Code:
find -type d -o -regextype egrep -iregex '(.*.ogg|.*.mp3|.*.wav)' | while read s
do
rename -v 'y/A-Z/a-z/' "$s"
done
find -type d -o -regextype egrep -iregex '(.*.ogg|.*.mp3|.*.wav)' | while read n
do
rename -v 's/ /_/g' "$n"
done
A French name like this:
Code:
Chateau De Sable (imagine accents above the letter a)
became this:
Code:
ch303242tea_de_sable
This is not what I wanted.
Why would the script not descend into a directory after it was renamed?
General :: Can't Differentiate System Language From Keyboard Language?
Apr 14, 2010i recently got a french msi wind U100x running on linux suse enterprise 10 sp1. (i am french and wanted a light netbook with french keyboard)i am totally new to linux and i believe that msi wind is not helping.because i am more used to english for settings, i set the main language to english, but it seems that it automatically reconfigures my keyboard mapping to english as well, so that azerty becomes qwerty.i reset it back to french, so now my keyboard is french, but so is the system.is there a way to differentiate keyboard from main user setting language?
View 3 Replies View RelatedGeneral :: Foreign Characters And Strange Translation
Oct 18, 2010In this case its the french accented e that is getting translated:[test]$ touch dd touch: cannot touch `351dd': No such file or directory the thing is the folder test is an smb mount. The windows server which is dropping files into it is able to make the file visible but the app running on the linux can't fetch it because the name is 'unexpected'if I create a file anywhere else e.g. in /tmp/ with the name response.txt it is fine. When I ls I see r?sponse.Can you advise me if I should be looking at the smb config AND the host config and give me some pointers as to where to get started trying to solve this.
View 3 Replies View RelatedSoftware :: When Removed CUPS Some Other Files Were Removed Too?
Jun 24, 2011I've been having trouble with CUPS.I uninstalled it and I wanted to re-install it. When I removed CUPS some other files were removed too. I don't have an option of installing the software or updating a system, in the Control Center.
View 1 Replies View RelatedUbuntu :: Support For Language While Keeping English As Language Used To Display Desktop?
Mar 5, 2011I have some music in another language, but when I open the songs in Banshee, their song names just come up as weird characters (like μ).I went to [System --> Administration --> Language Support] and installed support for that language, but the songs still come up like μ. (But in Nautilus, their proper names show).
I know the solution is to change my whole system language to that language, but I don't want to do that, as I am not very fluent in it. Is there any way to enable support for that language while keeping English as the language used to display my desktop?
Ubuntu :: Language Support - Each User Can Select Their System Language When Login?
Nov 1, 2010One computer .... three users .... three languages. How do you make that happen? User A speaks English and is happy with English. No problem. User B needs to use Chinese and would like the full system in Chinese. User C needs to use Thai and Chinese. They would prefer their menus to be in Thai and can use iBus for Chinese entry. How do you set up the system so that each user can select their system language when they login?
View 4 Replies View RelatedUbuntu :: Change Keyboard Language To Specific Language By Hotkey?
Jun 13, 2010is there some way to change keyboard language to specific language by hotkey?
For example:
Shift+Alt+1 - English
Shift+Alt+2 - Russian
Shift+Alt+3 - Ukrainian
Ubuntu :: Keyboard Language Standardized In Wrong Language
Nov 28, 2010While installing Ubuntu 10.10 I chose the wrong language for my keyboard. I tried to fix this in keyboard preferences and it seemed to work. The correct one I need is USA (and don't know exactly the difference between USA and USA alternative international). But every time I boot my laptop I get the old language back (Dutch) while USA is above the others in my preferences.
View 1 Replies View RelatedFedora :: Language Of Boot Message Change To Other Language?
Jan 7, 2011When I boot the fedora system,disable the plymouth,the language of booting message showed is english.Can it change to other language,chinese?
View 2 Replies View RelatedUbuntu Security :: Allow Foreign IP Address In Hosts?
May 30, 2011I found this IP address in my hosts.allowQuote:ALL: 119.42.68.232I cannot find any other evidence of intrusion.
View 4 Replies View RelatedUbuntu :: Play Foreign Produced Music CD's In 9.10 And 10.04?
Jul 8, 2010I found out that I was trying to play foreign produced music cd's (japan) and it just won't see the cd...any way around this problem? I've tried a number of the music players but nothing.
View 8 Replies View RelatedServer :: Postfix - Block Certain Foreign Domains?
Jun 18, 2009I am running a spam filter on debian lenny 5.1 with postfix, amavis-new, spamassassin, and clamav. It works pretty well but I would like to finish tweaking it to minimize the mail getting quarantined. It really isn't quarantining anything that isn't spam, except for an occasional list mailer. However, the quarantine is huge, and takes a while to go through. I noticed that much of the spam is coming from foreign country tld's like .cz is there anyway to have postfix run a check on the header and if the email, or smtp origination is from a server from a foreign tld have it just rejected. I can whitelist anything if need be in the future but as of now we don't do any business overseas and don't need to worry about blocking legit email.
I think this should be possible, however, I am unsure of the syntax for the file, where to put it and if wildcards are possible in domain blocking like
Code:
*.cz REJECT
Server :: Using Debootstrap To Install Foreign System
Feb 9, 2010At work they gave me the following task (and i need some help from you guys!):At work we have a normal PC running Ubuntu 9.10 (32-bit), which works good.We also have a LaCie Ethernet Disk Mini v2, which runs embedded Linux (RedHat), but is so trimmed down, you can't use the disk we would like to use it.The task is this: On the X86 machine, make a bootable image for the ARM architecture and write it to a harddisk (which fits the LaCie offc.) so it can boot off it.Now i have done some investigation, but don't know how to combine it all:
- I can use debootstrap to create a minimal Debian system, but there comes the problem, you can't chroot into a foreign created system (i.e. X86 cannot chroot into ARM system).
- I can use QEMU, which can emulate a ARM processor, but can i use the image that QEMU uses as a normal image for a harddisk, so it would boot off it (when using dd to write it to a real harddisk)?
- Current kernels support the LaCie hardware (Marvell chipset)
- I know how to use tools such as dd, so if the image is generated i can write it to disk and have the LaCie boot from it.
The LaCie box has the following: 1 ARM9 ARMv5TEJ (266 MHz) CPU with 64 Mb RAM, Gigabit network controller and 1 usb host port, internal there is a sata port obviously.The only thing i want at the moment is to have the LaCie boot Debian and i can SSH into it, from there the rest is easy as pie.Is someone willing to help me accomplish this task? It would seriously mean and help alot!If all goes well and if i get all things up and running i would like to make a Howto of it and place that here, maybe it will be of some use !
SUSE / Novell :: Removed Accidently Removed Panel At Suse 11.1?
Jan 9, 2009I accidently removed bottom panel of suse 11.1.Please be so kind to help me to get it back my bottom panel.
View 6 Replies View RelatedUbuntu :: Cut Command Netcat - View The Foreign Ip Addresses?
Dec 28, 2010So I opened a terminal and fired up netcat.I only wanted to view the Foreign Ip Addresses so I used
Code:
netstat --tcp --numeric | cut -c 45-65
and that gave me[code]...
There are two things that I am trying to accomplish here. The first is that I would like to "cut" the first three horizontal lines so that the output is only ip addresses.I tried tail but the number of different IPs changes so it still gives me those top lines. I tried head but that doesn't seem to give me any output at all.The second thing I would like to do is to filter out duplicate values. For example the output above has 2 duplicate entries of 66.102.7.101:80
Networking :: (Netstat -pl) Foreign Host Can Connect From Any Port (IPP)
May 12, 2010Netstat has always confused me. I ype netstat -pl and get this:
Code:
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 localhost:ipp *:* LISTEN 1476/cupsd
tcp 0 0 localhost:postgresql *:* LISTEN 13816/postgres
tcp 0 0 *:44223 *:* LISTEN 1288/sshd
tcp6 0 0 localhost:ipp [::]:* LISTEN 1476/cupsd
tcp6 0 0 localhost:postgresql [::]:* LISTEN 13816/postgres
tcp6 0 0 [::]:44223 [::]:* LISTEN 1288/sshd
udp 0 0 *:bootpc *:* 1267/dhclient
I assume that *:* means that any foreign host can connect from any port, but then what does [::]:* mean? and localhost:ipp... what port is ipp? Shouldn't ports be numeric?
General :: Why The Thanks Button Was Removed
Aug 26, 2010I must have missed the memo and was just curious why the Thanks button was removed? Or was this just an effort to make us type it in now? (not that I mind )
View 3 Replies View RelatedFedora Installation :: Fedora12 Picks Up Foreign Swaps During Install
Dec 23, 2009Installing a F12 on a new 500gb SCSI disk.I had a previous SEPARATE disk with a stable F9 on it including its OWN SWAP space.After installing F12 to boot from the new disk it installed. When rebooted crashed with an Fdisk type problem ... Even though the entire O.S. was supposed to be separately installed on SCSI 500.. After many frustrating hours of why oh why? it appears as though the F12 installation by default grabs any allocated "SWAP" space on any allocated DISK.As an other O.S. had used that SWAP for itself (Which it has every right to do) Why then did F12 pick it up?? and Use it in /etc/fstab...Then crash as a result??
Removing the offending "SWAP" entry from /etc/fstab install solved the problem.But my question remains ?? Why Does F12 install pick up "foreign SWAP space"?
Ubuntu Servers :: Apache2 Virtual Hosts Foreign Characters?
Apr 23, 2010when I'm trying to add a virtual host with a foreign character in the domain name. The foreign character is .
I've read earlier threads where it was said I should puny code it, which then translates to xn--nda
I then created a virtual host, as shown (replaced the real domain with exampl�:
Code:
<VirtualHost *:80>
ServerAdmin me@exampl�.com
ServerName exampl�.com
[Code]....
However, apache2 doesn't recognize this when I try to enter the domain, it just shows my 000default.
Ubuntu :: Cannot Rename Or Delete Files / Folders With Foreign Characters
May 12, 2010Can't rename, move or delete files or folders that have a foreign character.
Code:
The file or folder /data/down/done/1999 Taraf de Ha-douks does not exist.
Kubuntu Karmic. Fails in konqueror and dolphin.
Ubuntu Servers :: Adding Foreign Key Using MySQL Administrator Fails / Fix It?
Aug 27, 2010I want to setup my MySQL database and have MySQL up and running. I sill look for a good editor to add and configure my tables, it appears that MySQL Administrator is the only GUI client available.
But when I try to add a foreign key to one of my tables, there appears to be a problem. Both of my tables are InnoDB and both have a primary key.
-First I choose the tab "Foreign Keys" on my CLIENT table.
-Then I press the green + sign to add a foreign key, it is default named new_fk_constraint.
-I choose my table USER in the Refer.Table dropdownbox
-And then I should be able to match the FK field and the PK field in the box on the right... but this box is empty. Double clicking shows nothing. I only can drag the user_id of the USER table to it, but have no option to select the foreign column.
What the hell is wrong here??? This client is years old and should be really REALLY working IMHO! I was told by a friend that there is no good client available and therefore he is using some Windows program for this...
General :: Recover A Removed File?
Jun 8, 2010By accident, I used rm on a file I didn't want to delete. Is there any way that I can get it back under Linux?
View 4 Replies View RelatedGeneral :: List The Removed Rpm Packages Used By Rpm -e ?
Jun 23, 2011OS: RHEL / CentOS If I use "yum" to add / erase packages, OS will log the info to file /var/log/yum.log.
But if use "rpm -e" to remove a package, there is no related log file to show which rpm package got earsed. I have to run "rpm -qa > /tmp/$TIME", and then diff the /tmp/$TIME file to get the difference.
Is there is command to show the erased packages (erased by using rpm -e)?
General :: Check What Packages Were Removed?
Jan 25, 2010I've just joined this LQ forum as I couldn't find my answer on the web.
I am trying to find if there is a way to check/find out what packages were removed. In other words, I am looking for the history of packages that were ever removed.
I already know how to find what packages were installed using <rpm -qa> command, but it doesn't tell what has been REMOVED.
For example, how do I know if the <gcc> package was ever installed before, and when it was removed?
Networking :: Netfilter's -state INVALID Triggered By Foreign Dual WAN Routers?
Dec 22, 2010Recently I am logging the packets that are supposedly INVALID and I found out that I am dropping a lot of packets that seem legitimate (in the sense that they are clients that are allowed to contact us).
Code:
:invalid - [0:0]
-A invalid -j LOG --log-prefix "[DROP INVALID] : " --log-tcp-options --log-ip-options
-A invalid -j DROP
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
[Code]...
I would like to know If I can tell a complaining client that his dual-WAN solution is not behaving properly.Should such a dual WAN-router spoof its IP to the one that initiated the connection? And what happens if these packets are not dropped? Will they be accepted by the application or does it depend on the application? It sounds like a security risk if it does. It seems to me those packets will be ignored anyway by the application Netfilter's manual says that it's safe to drop these packets.
General :: Grub 2 Removed - Windows Can't Boot
Jul 3, 2010I used Windows to reformat my Ubuntu partition and now I can't boot anything. What's the best way to recover my netbook? I'm only able to use a 256 MB flash drive.
View 1 Replies View Related
