I would like to make a cronjob who makes a tag.gz of everything inside a directory in a recursive way. BUT there is a HUGE directory full of jpg's. I don't want this one in the backup.Additional points if it can backup symbolic links.
View 2 Replies
I want to run a cronjob every 15 minutes that checks a directory for files. If the directory contains more than ten files I want it to send an email to me.
All I have is this...
*/15 * * * * ls -l | wc -l | [filename] | mail -s "This is just a test" [email address]
I would rather not write a bash script. Is there an easier way to do this? I was looking into some commands like find and grep.
I am writing a shell script that finds all files named <myFile> in a directory <dir> or any of its subdirectories, recursively. I also need to take care of symbolic links that may form cycles, to avoid infinite loops. I am not supposed to use find command for the same
I started writing the code but got stuck. I thought using recursion may be a smart way, but its not working.
Code:
#!/bin/sh
findFiles()
{
thisDIR=$1
#cd $thisDIR
code....
This is the script I'm running
tar tf some.tar somefolder_insidetar
And output it's a list with all folders, files, and SUBDIRECTORY Files, the only thing I need it's just show the contents (folder and files) of the current directory choosed, not listing subdirectory files, or subdirectories inside subdirectories.
I am trying to find a directory named 480debugerror nested under child directories. I don't know the exact path, or even if I have the exact spelling of the directory I ant to find.
Is there any linux command to find directories with a given prefix or suffix, for example directories with a name of debug or debugerror, with unknown some prefix or suffix?
Some of my cronjobs are filling up files in my / directory. How do I make this stop? One of my cron jobs uses wget:[URL].. The bexcb0.php file writes a file and then echos a result if it is sucsesfull. These echo results are being put into bexcb0.php files in my /root folder and are piling up.
My / folder is filling up with files bexcb0.php etc bexcb0.php bexcb0.php.1 bexcb0.php.2 bexcb0.php.3 bexcb0.php.4 bexcb0.php.5 etc How do I make this stop? If I just remove the echo will they stop writing to the / folder?
If I runls -R1I get a recursive listing of all files under the current directory.However, if I dols -R1 *.avi, ie I want to search only for files with the file descriptor .avi, I get an errorQuote:ls: cannot access *.avi:No such file or directorySo it seems I am using ls incorrectly. What's the correct way to use wild card pattern matching when using the -R switch? Or maybe that isn't possible?
View 2 Replies View RelatedI'm having problems with compiling recursive Makefiles in my directory structure:
My folder layout is:
top/|- one/|- one.c (With main function)|- zero.c|- two/|- two.cin my top folder the make file looks like:
Code:
MAKE_DIRECTORIES = one two
.PHONY: all
all: $(MAKE_DIRECTORIES)
.PHONY: $(MAKE_DIRECTORIES)
$(MAKE_DIRECTORIES):
@echo $@
$(MAKE) --directory=$@
in my one and two folder I have the following Makefile:
Code:
.PHONE: all
all:
@echo $@
$(CC) $(CFLAGS) *.c
But when I compile it from top folder: make
I get following output:
Code:
one
two
Which states that directory statement by echo in main Makefile is ok but the files are not compiled in one and two.
I'm trying to make recursive makefile work but it's giving me two problems. I have a top folder with the main Makefile and one Makefile for each sub folder 'one' and 'two'. Makefile in subfolder 'one' and 'two' are identical. The top Makefile (still a bit messy) looking like this:
Code:
# Directories
CC = gcc
CFLAGS = -Wall -Wextra
TARGET_DIR = bin
MAIN_FILE = one.c
[Code]...
I am working at a client who has a project where code is a mixture of different source control systems. So a layout might be like this
project/a/.svn
/a/subfolder/.svn
/b/.hg
/c/subproject/.svn
/d/.hg
So I am trying to put together a simple command that when executed from the project folder will run the appropriate hg/svn command in each project i.e:
[Code]...
Since the client has many such projects, Instead I am looking for a solution similar to find -exec where the svn/hg commands are automatically executed on each first level of match (i.e. svn up is run in the project/a folder but not in project/a/subfolder). How can such a command be constructed ?.
Any pointers to make a shell script in cronjob or using at to be user interactive. We have a requirement to script a program where it prompts the users in CUI for feedback and capture the output in a text file and act based on the feedback.For eg: At pre-defined time i should prompt the acitve users whether it is ok to shutdown, whose feedback would be captured in a text file. Post which act on the updates in the text file
View 4 Replies View RelatedI know grep can search recursively (ie through all subdirectories to the bottom of the directory tree), but is it possible to ask grep to only search say, 3 levels down? That means the current directory, any directories in the current directory, and within any directories within those?
View 1 Replies View RelatedI can't get sed to actually change the file, clearly there's something basic not working, can anyone point me in the right direction? I know nothing about scripting. Oh yeah, all the directories have spaces which was why so elaborated.
find . -name "*epub" | while read file; do unzip -o "$file" content.opf && mv content.opf content.opf.bak && sed 's/<dc:language>UND</dc:language>/<dc:language xsi:type="dcterms:RFC4646">EN</dc:language>/' < content.opf.bak > content.opf && zip "$file" content.opf && rm -f content.* ; done
i am runing the below script
foo..
if [ "$type" == "ok" ]
then string=ZZZZ:I=$number
elif [ "$type" == "NOK" ]
[code]....
the code inside sc2.sh needs to read the input from the variable (string) above. is there any way to make this variable recognized inside the sc2.sh
I am a student studying computer science course.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Look at my screenshot at [url].
I ran across this problem when I used checkinstall and then tried to extract the contents of data.tar.gz (which you can find inside any .deb).tar has an option to extract the contents of a file in a given directory.From tar's manpage:
Code:
-C, --directory DIR
change to directory DIR
[code]....
Is it possible to make a script that makes a tree of all folders and subfolders and outputs it to either a .txt file or .pdf? All folders except from one shall list 2 levels. The except folder all the way.
View 3 Replies View RelatedHow do I use "chmod" command so that it allows me to write a file inside a certain directory ? This directory has permissions in the formdrwxr-xr-xOnce I try to write a file there, it says "Permission denied" ! Don't advise to use "sudo", since the file is created by some executable program compiled from a source code. If I was creating the file myself, I wouldn't have gone to this forum.
View 4 Replies View RelatedI have Administrator rights. I want to create new folder into /opt directory. So i clicked(Right click). but new folder menu has disabled. I cannot create new folder. Then Alternatively I used terminal. then I type mkdir /opt/lampp/htdocs/dummy now folder name has created. but I cannot paste anything into my dummy folder. So I checked permission which has you are not owner. How to create new folder & copy contents to new folder.
View 1 Replies View RelatedI'm using Slackware 13.0 on my server and am going to be employing a file-sharing service for a client. I was able to enable a quota, but my problem now is keeping the user inside their home directory. I've searched around and found an old thread on here (from 2003) that gave me some ideas, but it still isn't working. Should I be running vsftpd standalone or leave it on the inetd? If I set the shell to /sbin/nologin or /bin/false, the user can't log in through FTP, even.
chroot_local_user=NO
chroot_list_enable=YES
chroot_list_file=/etc/vsftpd.chroot_list
from /etc/passwd:
i'm a new Ubuntu user and starting with programming, i've already installed XAMPP for LINUX at /opt directory and the Eclipse app to code php, java etc.When I try to write or create a file inside htdocs XAMPP directory the Eclipse outputs this message to me:"Parent of resource: /opt/lampp/htdocs/site/includes/include.php is marked as read-only./ opt/ lampp/ htdocs/site/includes/include.php (Permission denied)"Whats the matter with this possible error?
View 7 Replies View RelatedI would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
View 1 Replies View RelatedI have amd64 Debian Jessie and i386 Debian Jessie installed on my laptop. I wanted to start x86 app that is installed on my x86 OS from my amd64 OS using chroot.
My mounts inside chroot:
Code: Select all/dev/sda7 on / type ext4 (rw,relatime,data=ordered)
/dev/sda5 on /tmp type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda5 on /etc/resolv.conf type ext4 (rw,relatime,errors=remount-ro,data=ordered)
tmpfs on /dev/shm type tmpfs (rw,relatime)
proc on /proc type proc (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
none on /sys/fs/cgroup type tmpfs (rw,relatime,size=4k,mode=755)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
/dev/sda5 on /var/lib/dbus/machine-id type ext4 (rw,relatime,errors=remount-ro,data=ordered)
sda5 is host OS and sda7 is guest OS
when I start any x86 app I can see "failed to create secure directory (/run/user/1000/pulse) permission denied" how to make pulseaudio to work inside chroot?
also what this command exackly does?
"pactl load-module module-simple-protocol-tcp rate=48000 format=s16le channels=2 source=auto_null.monitor record=true port=8000 listen=127.0.0.1"
How can I restore the data inside the trash after make it empty ?I need to restore an important folder from the trash and I can't find it there.I am using openSUSE11.1 (KDE)
View 8 Replies View RelatedI'm using ubuntu 9.10. I was wondering if it is possible to make a file/directory transparent when it is 'cut', like it is in Windows.
View 14 Replies View RelatedI know crontab -e sets a cronjob in /var/spool/cron but how do I set a cronjob to run from /etc/crontab? Is there a command used for this or would I have to manually edit a certain file?
View 2 Replies View RelatedI want to write simple non recursive makefile, but I am not getting syntax of it. Please give me example with simple description. I had read docs, html's but I am not getting how that works please give simple example. consider I have following directory structure.
[Code]...
I have this directory with multiple images 'pics' and the size is 20mb and I want to make a .zip or .rar package of this directory but with an increased size so the .zip/.rar file will be 100mb, and then when you extract it the file size is the original 20mb. I want to make the result file bigger, no compress it. I need to put all the directory in one single file .zip or .rar but it has to weight more (100mb), maybe it can be done with another application. By the way, I have a centos 5 from command line.
View 2 Replies View RelatedIs there a way to force rsync to not make directories in its destination directory; ie, to simply dump all of the files from the source directory directly into the destination without copying any of the folders that the files were originally in? I tried --no-dirs, but that seems to only be for empty directories.
View 1 Replies View RelatedI am trying to make a Live CD which makes use of Xephyr. Xephyr seems to do the job I need, however it seems that I can't copy things from the rest of my windows to paste into the Xephyr window, and copy things out of the Xephyr window to paste into the rest of the windows.I have the live CD here [URL] , and if people using the live cd can not copy things into the Xephyr window, then I imagine it will be very frustrating to use.is there any way to share the clipboard between two Xservers? Any thing I am missing?
View 1 Replies View Related
