I've installed RHEL 5.3 on a Dell Desktop. I don't want to install GRUB to the MBR. Is there a way to boot up RHEL from a floppy?I've installed GRUB on to a floppy but not having much luck starting up RHEL. In the past Slackware has allowed me to startup the kernel from a floppy using LILO. I was hoping that there is way for RHEL too.
View 6 RepliesI am trying to write a floppy boot image to my floppy drive (as root):
Code:
dd if=boot.img of=/dev/fd0
dd: opening `/dev/fd0': Read-only file system
[code]....
I have a USB drive on which I want to install Arch Linux (using the installer, not unetbootin or something similar, as I want the drive to be persistent.) The computer from which I want to boot this USB supports booting from a USB floppy, not a normal drive. Is there any way for me to make a USB floppy on another drive and use that to boot the normal USB drive?
View 2 Replies View RelatedI have problem with my laptop Samsung VM7000. The BIOS has a password on which I don't know. It has no HDD and the CD-ROM is damaged. I have a FDD floppy drive and two USB slots, they work (tested). To remove password I tried this http://dogber1.blogspot.com/2009/05/...ered-bios.html but it didn't work.Then I've found a Linux based password cracker http://www.pccmos.com/ but, since my cd drive is dead, I can't launch it. I can write it on a flashdrive, but my laptop is not booting from flash, so I have to make a floppy-boot-disc to boot flash via floppy, but how?
View 2 Replies View RelatedI am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.
View 2 Replies View RelatedIs there something weird about the FLOPPY DRIVE on F12? Nothing associated with it works & I can't get an icon for it. Also the FLOPPY FORMATTER no longer works. (mine is an internal drive)- I had some really miner quirks with it in 10 but it worked. I had some workaround launchers that I used until an upgrade semi-fixed it. (It would give a false error that it couldn't run but did. I just ignored it.)
I tried to edit FSTAB to cure a problem of my BACKUP drive showing up twice*** so while I was in there I added the stuff for the floppy & it still doesn't work. If I try to mount it manually, I get the error that /dev/fd0 doesn't exist.I tried to find some info on it & it SEEMS that there MAY be a bug but I'm not sure as the info is a bit confusing as to just what version & such they are talking about. And there was also the problem that all the stuff seemed to be OLD or not related to my problem.I why I quite hacking at my system, is that all my workaround launchers & the formatter say that there are GNOME things missing & they can't run. So I figure that there is something missing or screwy already & that I'd better ask BEFORE I make things worse or actually break something.With the fact that floppies are about gone, it's getting to be not that big of a deal but I still find myself having to use them for repair purposes (albeit, not as much) & it gets to be a bit of a pain to fire up M$ just to do something like this.
*** It appears that the one in FSTAB was the one I needed, so where would the OTHER one be so I can get rid of it? Or at least make it auto mount.
I was wondering if anyone has a floppy image, or something similar that can help me boot my USB.My plan is to have Fedora LiveUSB on my USB... and whenever I need to help someone, or have to use a computer, I can easily pop in my usb, and run Fedora. One problem I've had is that some of my friends have older pcs, and also some of the computers at college are older.I heard that it is possible to force a usb to boot on a motherboard that doesn't support usb boot. I think it has something to do with installing grub on the floppy, and somehow making it install or run usb drivers. (Not entirely sure)One alternative to this that I came up with was to use one of those business card CD's, but apparently the size is too small(at least in the one's I've seen). Not only that, but I can't find them anywhere.
View 4 Replies View Relatederror message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 1 Replies View RelatedI know that several people have answered this type of question before, but I can't seem to find the information I need to get it working for me. According to my research what I want to do cannot be done. However, i'm sure there must be a way.This is my scenario - I will try to be as accurate as I can be to make it easier for poeple to help. I have a Sony Vaio PCG-141C laptop, the half sized old ones. It has a usb floppy drive that I can boot from. I have also got a usb cd-rom drive but the laptop simply will not boot from it! I have got the F12 cd images downloaded and on a usb hard drive.
I want to boot from a floppy disc, to load F12 from the cd images stored on the usb hard drive. Now with Redhat 9 you could use a floppy drive to do just this. However, F12, does not support it.
Is there a work-around that I could try. I have already tried Smart Boot Manager, but it won't detect the usb cd-rom drive. I have Redhat 9 installed on the laptop, and can mount the usb hard drive from terminal. Could I start the install process from here with the images stored on the external drive??Is there anything I can do, or am I doomed to never get past this.
How do I access my floppy drive from Puppy Linux?
View 2 Replies View RelatedI'm running the Fedora fc8 (werewolf) and I just bought an external floppy drive from ebay, which I have problem mounting. I've edited the fstab with the following:
Quote:
/dev/floppy-sdb /media/floppy vfat rw,user,noauto 0 0
After inserting the drive into a usb port and run dmesg because the drive is not mounted all, I've the following added to the message log:
Quote:
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=0644, idProduct=0000
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: TEACV3.0
code....
How do you access a floppy drive from linux dsl live?
View 11 Replies View RelatedDoes anyone have any thoughts on getting linux on a x86 Compaq N600c with only a floppy drive, and the USB and PXE options are out of queastion (already tried with Win XP), only option I figure I have is to find a downloadable version that will install from current OS (Win 98se, freeware Service Pack 2.0 patch), but does such a thing exist, and if so where can i find it, (must be GUI). For those of you scratching your head as to how i intend on getting the download to it since i don't have internet. infrared import from another computer that is my gf's and will kill me if i get any linux software on her comp.
View 10 Replies View RelatedMy system has a 3-1/2 floppy drive. I do not know how to open it to copy files to a CD. My system knows itis there since booting with a data floppy gives a non system disk error. nce in Ubuntu, the floppy drive does not appear in "places computer".ince I am completely new to this system, I do not know how to proceed
View 1 Replies View RelatedWhat is the difference between vfloppy and virtual floppy disk drive?
View 1 Replies View Related2010.07.21 while trying to install Ubuntu 10.4 I've been trying to install Ubuntu 10.04 on my Dell workstation and am unable to get the Grub-2 bootloader to load properly. It seems to be failing for lack of a floppy drive on the system resulting in an error message that reads : error: fd0 cannot get C/H/S values.
I've gone through the Grub-2 page at [URL].. to no avail and other sources having similar problems have likewise turned up no solutions. here's the background: A while back I was trying to install a different version of Linux and had the same problems, then had to set the project aside for a bit. I don't think this has anything to do with Linux or Ubuntu per se, but rather Grub.
The system is an old (4-5 years) Dell workstation that has one drive (128 GB) set up for Windows XP and a second new drive (500GB) which I installed for Linux. There is a DVD/CD drive and the system contains no floppy drive at all. In one attempt to get this working I tried modifying the BIOS to indicate there was a floppy drive - this created a failure earlier in the chain with the BIOS failing to load properly, not unexpected, just a shot in the dark at that point.
At the moment I am considering just running out to buy and install a cheap floppy drive to see if that helps. I'll never use the thing though so I'd rather find a solution that doesn't require me to spend money on useless hardware. In any case, here's the /boot/grub/grub.cfg contents:
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[Code]...
I have several (small) bootable linux distros on USB sticks, and I would like to use them on several computers, some of which do not have USB boot support. Many of these also do not have a CD drive.In order to get around this problem I would like to create a bootable floppy disk that can load the system from the USB stick (similar to http://www.damnsmalllinux.org/wiki/i.../Boot_Floppies). I have found quite a few floppy images on the internet (like the one above), but I haven't yet got one that works and boots the USB sticks that I have (i.e. one that can boot Tiny Core).Is this actually possible (it seems to be, but I haven't got it to work yet) and does anyone know how I can do it?
View 3 Replies View RelatedI have an old laptop I'd like to try Bodhi linux on from a usb stick. I've got it installed running on a newer laptop so I know the usb install works. I've searched considerably & haven't found the dummy version of how to boot any distro on usb from a floppy. I have used a DSL floppy to boot Damn small on usb. Is there an easy way to boot Bodhi or any other linux distro that is on usb using the same floppy? I type dsl fromusb to get damnsmall to run. Bodhi fromusb doesn't work.
View 1 Replies View RelatedI have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
I am trying to flash my bios but they only supply an exe or a floppy image. obviosly I am not running windows to run the exe and I dont have a floppy drive. So I have been trying to copy the floppy image to a cd with little success.Size of boot image is 2884 sectors -> genisoimage: Error - boot image 'F1B.IMG' has not an allowable size.The way I understand it thats 4 sectors over the 1.44Mb floppy size? Is there a way I continue anyway? Seeing that I will be putting it on a cd I cant see that the size is going to matter
View 14 Replies View RelatedOS: Windows XP
Virtual Machine: Bochs-2.4.5
I want to learn some details about linux booting, so I begin writing a small boot program myself. Yesterday, I was writing a small boot program and planned to use it boot a Bochs virtual machine. The boot program is written in assembly language and compiled with nasm.I use bxiamge.exe in Bochs and create an floppy image called boot.img and configure the Bochs virtual host to boot from this floppy image. My question is how to write the compiled boot.bin program into the floppy image(boot.img)?
I scored a Dell poweredge 6300 from a local pawn shop. It has the capability to boot from cd-rom, but apparently not with isolinux, which is what the debian installer cd uses. I was able to boot to UBCD411 (Ultimate Boot CD, which uses syslinux), but didn't see any option to boot to a CD (maybe I'm missing something here?). I tried using the boot floppy from this site. I didn't expect it to work (it's from the Woody era), and it did not. I got a message that says SYSLINUX ver.XXXX CBIOS boot failed. I went to [URL].. and looked for a boot floppy image for Lenny, but apparently it doesn't exist. I did however find the boot floppy image for Etch.
To be honest, even if I did find the Lenny floppy boot image, I'm not sure how to use it to point the system to the installer CD. So, I have two questions:
1) Does anyone know of a boot floppy image for Lenny, or if I could use the Etch boot floppy image?
2) How would one boot from floppy, then point the system to the installer CD?
System info:
(4) Xeon Pentium 2 processors 500 Mhz
(6) UltraSCSI hard drives
(1) SCSI cd-rom drive
(1) SCSI dvd-rom drive
(1) Floppy drive
(1) 10/100 NIC
I'm open to any other suggestions as to how I could install Debian Lenny on this machine.
Situation- Laptop (2003 made Toshiba 2410) with dead secondary controller, so no CDDVD drive, BIOS does not support any form of booting from USB. Laptop has working floppy (had to repair it) distros that are good for older units like that that also support booting from diskettes, and then can mount and install from a USB CDDVD rom drive.
View 7 Replies View RelatedNothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
I have one RHEL server which is placed near a corner of the server room. Few people are using this server to watch movies and unwanted photos. I want to disable access to CD ROM. disabling the eject button of the drive wont work, as they used pin to force open the drive tray. Can I delete the cd rom drivers from the hard disk so that no CD will be detected ?
View 11 Replies View RelatedI have a laptop with a floppy drive, and it works fine in Windows, but I'm not sure how to use it under Linux. It does not show up in PCmanFM, like my USB-harddrive, but I do have a /dev/fd0, so I tried:sudo mount /dev/fd0 /mntand then it complains about the file system not being specified, so I dosudo mount -t vfat /dev/fd0 /mntbut to no avail.
View 2 Replies View RelatedI have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies View RelatedI need to get a backup copy of a huge directory on one of our RHEL servers. Rather than hook the external USB drive up to my PC and manually copy it all across the network, can I just plug it in to one of my USB ports on the server and rsync it?I know how to do the rsync, I just don't know how to get the USB drive to show up when I do a df -h and how to properly remove it before unplugging it from the server. this is a live server, so I can't go playing around and possibly mess something up.
View 14 Replies View RelatedI have an external usb connected floppy drive that I cannot mount.#fdisk -1 does not show the drive, in my ignorance I thought that it being a usb it would be recognized the same as flash drives and my external usb ide hdd are recognized.The drive does work, I have tested it in windows computers.Does the floppy need special settings?This may be related or it may be another issue totally:The floppy is recognized in gparted although I cannot format the disc to fat16 or fat 32 as they are greyed out.
View 5 Replies View RelatedI have an old Compaq Evo P IV, with FC 14 installed. The light on the floppy drive is on all the time and there is no object for it. It has been this way since I installed, but I don't use floppies much (who does anymore), but now I have a need to edit a file on a floppy, for of all things, a Windows system (boot issue
View 5 Replies View Related