I get a number of errors similar to the one below when I run:
Do I have to uninstall openoffice?
If so, how and if not what do I have to do to complete the installation?
Transaction Check Error:
It's what I encounter when I try to finish the installation of openoffice 3.3 with desktop-integration. The other .deb packages install ok.
Code:
noel@noel-SN12E200:~/Downloads/OOO330_m20_native_packed-1_en-US.9567/DEBS/desktop-integration$ sudo dpkg -i *.deb
(Reading database ... 152680 files and directories currently installed.)
Unpacking openoffice.org-debian-menus (from openoffice.org3.3-debian-menus_3.3-9556_all.deb) ...
dpkg: error processing openoffice.org3.3-debian-menus_3.3-9556_all.deb (--install):
trying to overwrite '/usr/share/mime/packages/openoffice.org.xml', which is also in package libreoffice-common 1:3.3.3-1ubuntu2
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
/usr/bin/gtk-update-icon-cache
gtk-update-icon-cache: Cache file created successfully.
Processing triggers for shared-mime-info ...
Unknown media type in type 'virtual/bluedevil-input'
Unknown media type in type 'virtual/bluedevil-audio'
Unknown media type in type 'virtual/bluedevil-sendfile'
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Unknown media type in type 'interface/x-winamp-skin'
Processing triggers for menu ...
Errors were encountered while processing:
openoffice.org3.3-debian-menus_3.3-9556_all.deb
I tried several times to uninstall openoffice from Kpackagekit, but I still have the same errors.
there are some errors on desktop effects are enabled.. there some black lines under the panels... how to correct them.... there is preview attched
View 1 Replies View RelatedWhen I run libreoffice from the terminal as root, I get
Code:
Over and over for about 7 time and then
Code:
I've found several post referring to this error message, but the one's that were resolved, tended to include a reinstall, reboot and mysterious magic fairies fixing the problem.
After installing libre3.3.2 using the Slackbuild scripts, I found that it displayed fonts correctly, but doesn't print the same font on the printer. The output of the printer should be Arial, but is instead some elongated, overlapping mess.
The same Slackware package installed on SW13.1 prints normally. (Same computer, different partition)
Spadmin used to control the printer fonts, but apparently not anymore.
System: Linux nadrek 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ AuthenticAMD GNU/Linux.
I installed Fedora 15 on Hyper-V (Windows host). I installed to disk, rebooted. Now I'm off to installing the Integration services, but I've got a few problems:
1) Since it is not yet installed, it looks like the network is not functional.
2) From what I can see, I need to have a couple of things installed beforehand (GCC amoung other things)
The problem is that when I did this previously with Virtualbox, I was able to install the pre-requisites with yum. Now this won't work as I have no network. I can't use VirtualBox here at work as we have everything else running under Hyper-V so have no choice but to go this way (VB and HV can't live together on the same host). it's just so much harder to go through this installation with Hyper-V.
I'm working on a media delivery platform where when a user click on the rstp link of the video,it should sent the request and see if the user is a valid user(using his username and password)
View 3 Replies View RelatedI'm running UNR 10.04 on a Samsung NC10.Every thing has been working great for the last few weeks since I downloaded and installed - almost everything worked great out of the box! Only 'problem' I was having was pants flash performance but that's a bit of a given I guess.However, this afternoon I did an update + upgrade, then did the required restart.Booted fine to login screen, but it then took a looong time for any thing to happen - before any panels/UNR interface appear, I get 3 errors, one after another.They are:
1. Could not update ICEauthority file /home/matt/.ICEauthority
2. Problem with configuration server /usr/lib/libgconf-sanity-check-2 exited with status 256
3. Nautilus could not create the following required folders /home/matt/Desktop, /home/matt/.nautilus
(I think the third one asked me to create the folders myself and then give it correct permission but not certain)I tried loging into standard Gnome desktop, same errors, same problem. Same with the gnome safe thing.After a while however, I do get one panel, in the top left corner - rather than stretching full width, it's about 2 inches across. On it are some buttons (mail, sound, chat, power, time) but not some that should be (guake, wireless etc)I brought up the run dialogue (Alt + F2) and tried a variety of programs but nothing happened with any (tried firefox, chromium, xchat, terminal)
I'm getting a strange error when I try to use Hulu desktop. When I start it, the following error pops up:
Quote:
Hulu Desktop requires Flash Player 10.0.22 or higher, but this version of Flash is 10.0.22.87. Please download and install the latest version, then restart Hulu Desktop I'm on a 64 bit machine, and have tried both the most up-to-date 64 bit version of flash, and the version installed using flashplugin-installer (which I understand is a wrapper around the 32 bit version). I've also tried using Hulu through my browser, but get errors about how the video is not available, regardless of the video.
I have been using Opensuse 11.4 for the past 3 months and for the past 2 weeks the system freezes regularly due to multiple errors.Iam using Kernel 2.6.27.6-0.7-desktop under KDE4 with regular updates
Errors 1 & 2 occured during Normal mode
1)
Aug 28 15:11:52 linux kernel: [ 1153.000036] render error detected, EIR: 0x00000010
Aug 28 15:11:52 linux kernel: [ 1153.000036] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[Code]...
Can anybody tell me what kind of fsck errors are found on a system?
View 5 Replies View Relatedhow to take a windows 7 install and intergrate it into linux. i like that wine integrates into the windows manager. but of course wine simply doesn't do what i want. i love linux because of complete customization. i like windows 7 because it runs the programs i use on a daily basis properly. i know there has to be some way this can be done. im getting tired of using windows 7 inside a virtual machine for varius reasons. i know there has to be someway i can combine linux and windows normally.
View 6 Replies View Relatedi have sendmail & NIS working properly but i donot have centeralized authentication i.e. server user is not able to login from client Desktop and i donot get Global address book of users in mail client when accessing mail.
View 2 Replies View Relatedpresent we have a folder shared between branches (Approx 10G of data) and we're using Windows 2003 with DFS but this has had a number of issues and thus is scheduled to be replaced with a Linux solution for various reasons.I would need a scalable system that will allow me to start off with 5 servers each having a samba?hare to Windows pc's. The 5 servers though must replicate any changes made to the folder. So if server 1 received a new file, it should replicate the change to servers 2-5 etc... Ideally I would also like the shares to allow for AD based permissions.Can anyone recommend a way forward with this? I am currently looking into GlusterFS and lsyncd as two options for the replication
View 1 Replies View RelatedIam trying to integrate drbd 8.0.16 in 5.3 release.
Installation of drbd was successful but modinfo fails to identify drbd kernel module.
[root@inccishh0884 usbs]# /sbin/modinfo drbd
modinfo: could not find module drbd
[root@inccishh0884 usbs]#
[root@inccishh0884 usbs]# ls -l `find /lib/modules -name drbd.ko`
[Code].....
how i can make the modinfo to identify the drbd modules present in 2.6.18-128.4.1/extra folder.
Is there a drbd module available that matches exactly with the kernel version 2.6.18-128.el5
I',m executing ping, but it didn't work, in order to find the mistake in my network I would like to know how to see the errors:
Code:
18 packets transmitted, 0 received, +12 errors, 100% packet loss, time 17038ms, pipe 4 I want to see this +12 errors. Could I do that?
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
I'm running Debian unstable on amd64 with KDE4 desktop. I know there exists KDE integration package, that enables iceweasel to use KDE file dialogs. In ubuntu its called kmozillahelper. There was similar packages in Debian (called differently as far as I remember). I happily used it in unstable, but several weeks ago it disappeared for some reason and I can not find it.info on iceweasel + KDE integration in Debian?
View 10 Replies View RelatedI install Firefox 3.6 from the mozilla/openSUSE_11.2 repo, but F6 didn't work; so, I tried uninstalling it and installing Firefox proper. Of course, none of the KDE integration worked with that; so, I am back at the normal repo's Firefox but no KDE integration (same with Thunderbird). I do have MozillaFirefox-branding-openSUSE, MozillaFirefox-theme-oxygen, and mozilla-xulrunner191-kde4 installed.
View 2 Replies View RelatedI helped a friend with a old game. File-roller couldnt handle the archive so I installed WinRAR via Wine. But now WinRAR is the default app for RAR-files and the icon has been replaced by a WinRAR iconI have removed Wine and it's settings but nothing helped. How do I remove the Wine integration?
View 7 Replies View RelatedI just installed 10.04 and am really impressed I am enjoying it more then win 7 and mac osx. The integration of social networking from the top panel was one of my fav features however my niece got hold of my laptop and deleted it and I cant figure out how to restore it along with all of the features. I dont want to have to reinstall now after finally getting everything where I wanted it.
View 2 Replies View RelatedI've got it in the notifications, I've got it in the indicator applet... How do I get rid of the evolution buttons in the indicator and get a working "Dynamic" Thunderbird one? (With the compose message, inbox buttons etc) Need the indicator to respond and look like the mail icon. Also, does Thunderbird have a "Silent mode" where it can run without a window and show notifications when needed? Is there a way to have contacts in a tab? I need to switch cause evolution is driving me insane with the constant password requests... It could fill up the hundred paper-cuts all on its own...
View 2 Replies View RelatedI Installed Bugzilla 3.2 on Centos 5.3.I have other window 2003 server (Domain Controller).But it is Windows Small Business Server 2003.i have many OU on that.I want to integrate Bugzilla 3.2 with LDAP.
View 2 Replies View RelatedI want to know if I can you communigate Pro with procmail integration?
I have read and seen that, CommuniGate Pro has some nice features so I want to use it.
Or is there a way I can do email filtering in CommuniGate with out procmail?
I have read a lot of threads about this topic and tried everything as best of my knowledge but I still can not make it to work.Need specific directions on whats wrong, missing or how to debug the problem.Here is the DHCP error:
14:49:05 Unable to add forward map from service2.example.com. to 192.168.1.150: timed out
14:49:05 DHCPREQUEST for 192.168.1.150 from 00:04:75:d3:9f:27 (service2) via ETH02
14:49:05 DHCPACK on 192.168.1.150 to 00:04:75:d3:9f:27 (service2) via ETH02
[code]....
I upgraded to 11.04, but the updgrade crashed, and now it has some errors with Unity crashing every time I open a terminal. Is there any way to re-install without having to reconfigure all my programs? I am running a dual-boot.
View 3 Replies View RelatedI installed and then reinstalled UBUNTU 11.04 /x86 server into clean HDD1. It was done however with errors and boots in console tty mode
After the last installation there was message regarding 4 errors
Then login prompt.
Configuration:
Intel Pentium 4/2,4 MHz, 512 RAM
Graphic card GeForce 4 MX440 /AGP8
2 HDD (HDD0- 230 GB Windows XP+GRUB, HDD1-180 GB UBUNTU 11.04)
CD ROM Plextor, FDD
GRUB boot to UBUNTU
Just installed Iceape because Iceweasel uses Xine which does not work correctly. How I get the complex bookmarks across to Iceape? There is a menu option for transferring a bookmark *file*, perhaps that's the thing, but which file should be specified?
View 3 Replies View RelatedI'm playing a little bit with tracker, and I particularly like the feature that enables you to tag files. I was trying to see if there was a way to integrate it into Nautilus, and I stumbled upon this: [URL]. Which, of course, doesn't work for me! (Fedora 10). One thing to note is that they say to install python-nautilus, which I couldn't find, so I installed nautilus-python instead... just a different name for different distros or are they actually 2 different packages?
View 8 Replies View Relatedapps that ran and installed just fine under 11.1 don't (seem to) under 11.2.I was running Gnome under 11.1, and have used the same desktop as I moved to 11.2.For example, I was able to install and run the Novell Support Advisor 1.1 under SLED 11.1 just fine. I would need to authenticate as root before the app would run, but it would run just fine.After I upgraded from SLED 11.1 to 11.2, things just don't seem to be as stable. NSA (and other apps) seem to install, but their icons don't appear in the applications folder, and when I login su and then attempt to run, the terminal window usually hangs.
I can't get a CIFS client to install (I see it in the list of installed apps, but it's not present under YAST).Banshee was a beautiful app under 11.1, but I feel like I spend more time working around it's glitches in 11.2 rather than setting it to play and enjoying it's usefulness.The Novell Client (yes, I know, it's not officially supported under 11.2) has caused me enough heartache that I VNC an XP box just to get to files.So anyway, enough whining, what can/should I do to work through these issues? Should I just give up and go back to 11.1? Is it better to burn and re-build rather than upgrade per the OpenSUSE docs? Is there some "magic" log files folder (other than availble via YAST) to see where error messages are occurring so I can troubleshoot the issues better?