I'm aware I can do !commands but I'd like to somehow integrate a shell in vim. Or could I use screen and split the screen so that vim takes up say, half of the screen?
View 4 RepliesIt used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?
View 4 Replies View RelatedI have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub:
grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:
Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved
0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24
[Code]...
Does it mean I have the driver? how to set it to 1024 x 600 in grub2?
I am trying to get my standard PS/2 Wheel mouse working on the Console command line, and seem to be having major problems getting it to work.
For the record, I am NOT talking about X, Xterm's or any Graphical Interface, my mouse wheel works fine in these environments.
I am purely concerned with getting the mouse wheel to work on the Console.
After many hours of reading forum posts about getting the wheel to work on the Console, this is what I have tried to date:
1. I have downloaded and installed every version of gpm I could find in the hope that one would utilise the wheel. (No Success).
2. I compiled and installed the latest version of gpm stable (1.20.6) to see if the wheel would work with it. (No Success).
3. I have tried setting up gpm-1.20.6 as a repeater to X, using every string I could find (msc, ms3, pnp .. etc), as well as every /dev entry in xorg.conf /dev/mouse, /dev/input/mice/, dev/gpmdata/, /dev/psaux ... etc). (No Success).
4. Created directories and configured a gpm.conf to both /etc/ and /etc/conf.d/ in the hope that gpm was looking for them there (read that in one forum or another). (No Success).
5. I then tried to find mouse wheel patches for gpm, and then downloaded the relevant version source gpm.***.tar.gz to go with these patches. Nearly every single one of the patches failed to apply (using patch -p1 >), except for one version I tried that did apply ... but then failed to make (stating that the source had a different signedness or some such thing) ??? (No Success).
6. I looked into IMwheel, but that seemed to be a purely X program that was a lazy way of writing ZAxisMapping in xorg.conf. (No Success).
So now I am stumped ... Does anyone know if if is possible to get:
a). A Wheel Mouse Patch for a recent version of gpm (1.20.6) that will actually apply, and then make?
b). A prepackaged recent version of gpm-1.20.6.tgz that has been patched to enable the wheel that I can use?
c). Any other information that may enable the mouse wheel to start working on the console.
I'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View Relatedi've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
I'm in normal mode then I press "ayiw to yank a word into register a, gvim shows the "ayi as I type it near the bottom right corner. Is it possible to get this real-time display in console vim, if so how?
View 1 Replies View Relatedwhen I use e. g. cat file.txt | grep --color=tty "pattern" I get the pattern I search highlighted. When I want some more context around each hit, grep has the -A, -B and -C parameters. However, I want to display the whole file (or whatever command output) and highlight a certain pattern. Does such a highlight command or tool exist?
View 5 Replies View RelatedThis is a problem regarding VxWorks. Sometimes i am not able to type anything in the command prompt of vxWorks console.
-> if i type anything here, it takes it as an enter key>
-> Why is this behavior? It doesn happen always. Any bug in vxWorks?
how do you write the ASCII character #27 in the vim command line?
View 6 Replies View Relatedtrying to install the latest NVIDIA drivers:
I need to disable the X server to install it, which brings me to a blank screen prompting for a login before continuing. it reads thusly:
Ubuntu 9.10 chris-linux
chris-linux login: [i would assume i put in chris here...]
Password:[i type the password i use to login from the normal GUI screen, however i see no indication that im typing anything..]
Login incorrect
Just want to know what OS is, Fedora/RH/... Tried the following on a redhat machine:
uname -o : GNU/Linux
less /proc/version:
Linux version 2.6.18-164.el5 (mockbuild@x86-002.build.bos.redhat.com)
(gcc version 4.1.2 20080704) (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:51:54 EDT 2009
What is the right command to do it?
I can click the "movie player" from the GUI of Ubuntu, but how could I know the corresponding command line cmd. I want to run the movie player from commmand line. And this is not only about the background command for the movie player, I want to know all the actual command that was run by the x-window shell when I click on one of the icon on the menu.
View 10 Replies View RelatedI need to convert thousands of DDS images to PNG format in Linux, preferably in command line. Is there any program available for such task?
View 1 Replies View Related$ ls one.tar.gz
one.tar.gz
$ tar -xvfz one.tar.gz
tar: z: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
$ tar -xvzf one.tar.gz
one
$ tar -xzvf one.tar.gz
one
$ tar -zxvf one.tar.gz
one
$
What command(s) do I type in the terminal to put the computer to sleep?
View 1 Replies View RelatedI installed an older version of gdm and created a new XR1196 directory in /usr/bin and now my computer only boots into command line...
I can get to the GUI using startx, but in doing so I lose all audio output, and the option to shutdown or reboot from both CairoDock and the default panel...
I was trying to learn more about xorg configuration and came through an exercise that should be run at run level 3. So, I wrote init 3 in the command line then the x server stopped and the system was trying to enter run level 3 but then it hangs and nothing happens. At that time I was connected to the system via putty and wrote the command init 5 and the x server started again normally. I tried init 3 again and had the same thing.
View 4 Replies View RelatedHow can I split a line in vim into 2. example :
original line :
welcome to linux questions
after splitting :
welcome to
linux questions
Is there a single key strike through which i can do it ? like going to the word "to" and striking that key will put rest of the words in new line. ( i want to do it in normal mode , not in the usual insert mode where it obviously can be done by typing <Enter> )
I typed in sudo apt-get install ubuntu-desktop and it tells me it's already installed. Good. So it should work. I type sudo/etc/init.d/gdm start and the screen goes blank for 8 seconds three times in a row and then back to the command line. I have also tried gdm start without the path before and it says GDM already running. Aborting! I have 8.10 and it's a valid disk (no errors).
View 14 Replies View RelatedI'm trying to concatenate two command in one line.
Below are the commands:
Code:
I wanted to list all files in /portal/apll/nad/send and grep only .tmp files that contains credit card word.
i'm using ubuntu with the GUIi have a .pps (power point presentation) on the desktop. I installed the powerpoint viewer and made it the default program for opening the file.when i double click on the file everything works.my problem is i need this on a schedule so i downloaded scheduled task.in scheduled task they ask me the command line i want to execute and that's where it doesn't work. I checked the "allow executing file as program" box on the file but i get the error cannot execute binary file.
View 1 Replies View RelatedI really would like to learn all I can about using the command line. So if anyone knows of a good tutorial please let me know. I am running Ubuntu 10.10.
View 3 Replies View Relatedim installing gentoo on to my lappy and i have one problem if i do a command like help or something to that affect half of the commands dissapper so how do i scroll on it
View 7 Replies View RelatedI have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies View Related