General :: Install Gcc On Fedora 13 With I686 Architecture?
Jul 28, 2010
I have installed Fedora 13 lately, however its architecture is i686... i want to install the GNU C Compiler (both c and c++)..... now i searched for i686 architecture gcc but most of them are not compiled.. and are archives e.g., gcc-4.4.1.tar..... Also, some RPMs say about dependencies. Is there a simpler solution?
How to install Gcc, i dont have any compiler in Fedora even cc is not there!! I installed fedora from a live cd i got with the Digit Magazine!
I'm trying to cross compile the GNU make for Alpha Architecture on my i686 PC and the GNU make i compiled would be placed in my virtual hard disk which is a Alpha based linux simulated system. My question is now , I'm able to cross compile the GNU make on my i686 real PC machine , but when i let the make program run in my virtual machine , it pops out the error ..
make: /lib/libc.so.6.1: version `GLIBC_2.4' not found (required by make)
After that, I try another alternative , and I read through the file "INSTALL" on the GNU make directory that I downloaded from the internet . In this case , I downloaded make-3.81. On the sub section "Compiling For Multiple Architectures" It says that
"You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script.`configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture." And I do not understand the line "by placing the object files for each architecture in their own directory" . What object files that I should put ?
I compile kernel with i686 architecture but I get linux-image-2.6.33.9-libre12.6.33.9-rt31_2.6.33.9-libre12.6.33.9-rt31-10.00.Custom_i386.deb. How I can do it ?
I am not very new to LINUX. I was using UBUNTU for the last 1 year and I have switched to Redhat now because I am thinking of taking a RHCE certification now. Actually the problem is that I am unable to install RHEL 5.2 i386 on my i686 machine, I have bought it recently 1 week ago. I tried to use the boot parameter "linux noprobe" then it said drivers not found after 2 steps when it loads drivers.
When I tried to make a GUI install it hanged after "loading /sbin/loader" and said "kernel panic - not syncing". And when I tried to make a text install it said hanged agin after "loading /sbin/loader" and said something like "Oops: 0000 [#1] SMP". If drivers are needed then when can I get those and how can I install those drivers? here is my hardware information as "lspci" says:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
When I install wine the add/remove program wants to install both 86_64 and i686 files. I have the x86_64 version of Fedora 14. I am having problems with counterstrike and have installed it using Wine, have noted problems when both types of files are installed.
I would like to have Fedora set up just right but as with all Linux distros, am having trouble keeping my head above water with fc14. I have success up to a point and then want to go back to Windows for its simplicity. Just this wine problem
Last nights upgrade of java-1.6.0-openjdk-1.6.0.0-43.1.8.2.fc13.i686 and java-1.6.0-openjdk-plugin-1.6.0.0-43.1.8.2.fc13.i686 prevent the loading of Ameritrades Command Center.Downgrading to version 1.6.0.0-37 fixes the problem. I'll post the bugzilla number as soon as I get the chance to file it.
Trying to install draftsight on my 64 bit 10.10 system to give it a try. I do solid modeling work for a living (Inventor/Solidworks) and have to use Autocad. Ran across this program a month or so ago and really like it. Much less bloated that AC but does a nice job in the 2d world for a basic program. The package installer gives me a wrong architecture message (see attached). I think I had to change that to get adobe AIR installed and wonder if its possible to do the same here.
When I ran YaST | Software Management | Package | Update if newer Package Available this morning I get this message:
Code: #### YaST2 conflicts list - generated 2011-01-22 09:40:42 #### libxine1-codecs-1.1.19-2.pm.48.15.i586 requires libpostproc.so.51, but this requirement cannot be provided uninstallable providers: libpostproc51-0.6.26387svn-1.pm.2.1.i586[ftp.uni-erlangen.de-suse] [ ] break libxine1-codecs by ignoring some of its dependencies [ ] Following actions will be done: install libpostproc51-0.6.26387svn-1.pm.2.1.i586 despite the inferior architecture ..... [ ] do not install libxine1-codecs-1.1.19-2.pm.48.15.i586 #### YaST2 conflicts list END ###
What is it telling me? What should I do? What are the implications?
when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
It seems I have some problem with glibc i686 on my VIA CPU. How can I force to install glibc i386.rpm instead of i686 in the clean installation process?
i am using acer extensa 4620 laptop of 32bit architecture with core 2 duo processor and 1 gb ddr2.i have installed RHEL 6. i want to do practice on virtual machine for my rhce exam.due to 32bit architecture i am not able to use kvm one more problen,during installation of RHEL6 i cannot use "install or upgrade" option while booting dvd.after entering this opiton my screen goes blank nathing comes,but i am able to install usic "basic video driver option" same problem i face when i enter in rescue mode also..... nothing is displayed...the screen goes blank
I clicked on i386 instead of x86 64. The box is laptop AMD64, and I stopped the upgrade at this point: Should I continue it and change later? Or delete files and start again?
I have configured for yumex that I want to exclude all *.i386 updates. Still "yum downgrade <anything>" can download and install i386 packages. One other thing which is not purely x86_64 issue, but yum/yumex issue anyway. I noticed that yum updates daemon (yum-updatesd) does not work any more, or at least for x86_64, so I enabled yum_cron with catastrophic consequences. It automatically updated my amarok 1.4 to amarok 2.* although I have an exclude in Yumex for amarok! Here I go again!! I am not sure if I remember how to make 1.4 functional again...
i was trying to install mcafee enterprise ed on my ubuntu10.10 got the following error msg
Code: dpkg: error processing MFErt.i686.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: MFErt.i686.deb i tried to copy the contents of mounted folder to another and retried same error msg followed i used furious iso mount
i was trying to install runtime environment first as per the instrucions in installation guide
I have downloaded Fedora 11 x64, and I went to the adobe website and downloaded the tar.gz file for flash player. I went into the terminal to untar the file and after I did that I tried to install it and got this error :
ERROR: Your architecture, 'x86_64', is not supported by the Adobe Flash Player installer. What does this mean? My dad could get his to install but his is 32 bit.Do I have to wait until the full version is out?
When I try to install (using yum) various things like wine in 64-bit F12, I get
Code: Missing dependency: glibc-common = 2.11-2 is needed by package glibc-2.11-2.i686 (fedora) What is currently installed is glibc-common-2.11-4.x86_64
I have an Acer Aspire 3680 with Fedora 12 on it which has been running just fine until I did some updates last night then shut down and tried to turn it on this afternoon.Whenever I try to boot up my laptop I get the following error message:
Code: [drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping forever.
i have F12 with kernel 2.6.32.11-99.fc12.i686.PAE. But i just have 2gb ram, so im not really needing to use a PAE kernel. So i was thinking on change my kernel to a 2.6.32 generic, but the fact is that im not sure if i can do that, and i could, how??
I upgraded from F12 i686 to F13 (I should say clean install). And now ever so often my computer locks up...... I will wait for an update or something this week but if it continues after I may have to go back to F12 (on another HDD)
I'm using Core 2 Duo. So, from Intel website I found that it is 64-bit architecture CPU.
Long back I've installed Ubuntu OS on this machine. But I'm not sure if I installed x86-32 or x86-64 version of Linux. I want to know which version of Linux I'm using. How to know that?
