General :: Executing With OpenMP On YDL 6.2 - Missing Libraries
Jun 30, 2010
I am running Yellow Dog Linux release 6.2(Pyxis) on my PS3. I would like to compile and run C programs that utilize OpenMP for parallel programming. Unfortunately, I have not been very successful. I am able to compile programs containing OpenMP statements error free, but when I attempt to execute the binaries I receive the following error: Code: ./file: error while loading shared libraries: libgomp.so.1: cannot open shared object file: No such file or directory Compiling programs without OpenMP statements works fine.
Because it has to do something with missing libraries, I am not sure if knowing the executable search paths may help in diagnosis, but when echoing the path environment variable:
[Code]...
The version of GCC on this machine, 4.1.2 20080704 (Red Hat 4.1.2-44), is identical to the ones I have on two other machines (CentOS release 5.3 (Final) and CentOS release 5.4 (Final)) and they both compile and execute OpenMP code flawlessly. I have tried building and installing another version of GCC that would possibly include the OpenMP libraries, since, according to some sources, GCC has only supported OpenMP since version 4.2. But I have not been successful with that either (that problem would make a good second thread.)
View 3 Replies
ADVERTISEMENT
Jun 14, 2011
When i try to execute scp command:
scp -r /localhostdirectory username@remotehostservername:/remotehostdirectory
I get the following error
0509-036 Cannot load program /usr//bin/ssh because of the following errors:
0509-150 Dependent module /homepath/server/bin/libcrypto.a(libcrypto.so.0.9.8) could not be loaded.
0509-153 File /homepath/server/bin/libcrypto.a is not an archive or
the file could not be read properly.
0509-026 System error: Cannot run a file that does not have a valid format.
View 6 Replies
View Related
May 3, 2011
Where can I find the rpms for OpenMP for SciLinux 5.5 for64bit computing?
View 3 Replies
View Related
May 11, 2011
Why many Linux distros are trying to use always the latest versions of the libraries and don't save the old libraries for compatibility? I mean, I can see libtiff for example, i can found a libtiff.so.5 on my /usr/lib, but doesn't store a libtiff.so.4 or 3 just for binary applications or games. For this example, I need libtiff.so.4 for uplink.
That should happen too on the old version of sims for linux, some ID games or others.What's wrong with storing old libraries? PD: Yay, my first post on 3 years!
View 6 Replies
View Related
Jan 15, 2010
I moved a program from one machine to a different one. When I run it on the new one I get errors. How do I tell what libraries it's missing and then find them?
View 8 Replies
View Related
Mar 25, 2010
I'm trying to install proprietary driver of my old ATI's Radeon x600 card. There are two libraries missing: XFree86-Mesa-libGL XFree86-libs
View 2 Replies
View Related
Oct 24, 2010
Installing from sources was always complicated to me, but biggest problem is installing when some strange dependencies are "missing". Let's do it on example - I am sure it will benefit lots of users.I have a unmodified ubuntu 9.10 (Karmic) on 64 bir architecture. I download latest Grisbi sources from official web page.I didn't modify any paths to system variables...and it's usually problem with glib or gtk with all other sources I try to install.
1) Could someone help me in this particular case with missing dependencies please?
2) What every User should do when trying to install from source and some libraries are missing?How to find them? How to install them ?
View 4 Replies
View Related
Jun 5, 2015
I'm having some issue running a wine application, this seems to not start 'cause of some missing libraries.
So I tried to locate those and the only one I found is this:
# locate libxcb.so.1
/usr/lib/i386-linux-gnu/libxcb.so.1
/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
/usr/lib/x86_64-linux-gnu/libxcb.so.1
/usr/lib/x86_64-linux-gnu/libxcb.so.1.1.0
These others don't show any result, but I checked and all the corresponding deb pkgs are installed (both amd64 and i386):
libx11.so.6
libxext.so.6
libgl.so.1
libc.so.6
What do you think I can do to resolve? I aleady tried a reinstall. Not tried to purge 'cause apt asks to remove half of the system.
View 2 Replies
View Related
May 15, 2011
Trying to build git gimp raises an error about missing libcairo.la and libfreetype.la /usr/lib/ does not have those files though the build manifest shows they should be included. Both cairo-devel and freetype2-devel have been installed, rpm query produces; cairo-devel-1.10.2-6.11.1.i586 and freetype2-devel-2.4.4-6.1.i586 This is my first attempt at using SUSE, so it maybe I am missing something elementary
View 3 Replies
View Related
Jan 26, 2010
I've recently upgraded from 8.04 to 9.10 and in the process, I've lost access to gfortran. I'm using the gfortran that came with Karmic, but when I execute the make file I get this:
Code:
ld GetNextPerigee.o -o GetNextPerigee
ld: warning: cannot find entry symbol _start; defaulting to 0000000008048094
GetNextPerigee.o: In function `MAIN__':
GetNextPerigee.f90:(.text+0x26): undefined reference to `_gfortran_set_options'
GetNextPerigee.f90:(.text+0x2b): undefined reference to `_gfortran_iargc'
[Code]....
View 1 Replies
View Related
May 30, 2010
Fascinatingly weird one here. First, this issue isn't on my computer, it's from someone who I am helping. I don't have first-hand access to the computer. Some background: the machine originally had Ubuntu Hardy, which we upgraded to Lucid a couple of weeks ago. Earlier this week, he gave me a call that Ubuntu wasn't booting up; it dropped to the command line. Some tinkering later, I figured out that libgthread-2.0.so had become corrupted, so X wasn't starting. It gave an error complaining that it had an invalid ELF header.I figured that this was just an odd freak occurrence; there was a bad kernel panic previously, so maybe the library was upgraded and the system was just writing to the disk at that time. Fixed via sudo aptitude reinstall libglib.
Ubuntu then started and everything ran perfectly. Today, he gave me a call. After he had restarted the computer, Ubuntu again dropped to terminal at the same point while booting. I had him open a new tty and run startx, which failed with a different shared library but the same error: libXext.so.6 has an invalid ELF header!
We had run updates, but I don't recall whether X's shared libraries were touched. Even if they were, though, that shouldn't affect anything. There were no hard resets between my fixing libgthread and libXext breaking. I'm going to try a clean install; I'm really just hoping we can figure out why this is, because it's an amazing little problem.
View 4 Replies
View Related
Feb 21, 2011
i a newbie at linux and i installed Fedora 14 with minimum services and software in order to install Dynamips/Dynagen (Cisco router emulator).when i try to install Cisco rpm -ivh dynamips-0.2.8RC2-1.i386.rpm file i get the following:
error: Failed dependencies:
libc.so.6 is needed by dynamips-0.2.8RC2-1.i386
libc.so.6(GLIBC_2.0) is needed by dynamips-0.2.8RC2-1.i386
[code]....
View 4 Replies
View Related
May 6, 2010
Is there any way to use a dynamic libraries as a static libraries instead when compiling, so that my resulting executable won't have them as dependencies?
View 3 Replies
View Related
Jul 11, 2010
I'm having trouble installing software from the source files. From what I can gather the problem lies with not having the correct c libraries installed. My understanding is you use the ./configure, make, and make install commands in a terminal to install. And that the configure command checks to see if you have everything to install. this is the output when I try to configure:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
[code]...
View 5 Replies
View Related
Apr 2, 2011
I am trying to run algodoo from terminal after I install it, but it doesn't run. It gives this error. I have been having troubles with permissions in the /usr folder recently, so I think that is what might have caused this. Please read through it thoroughly, as algodoo is actually located in the /opt folder.
Code: jon-Tuxbox:~$ sudo '/opt/Algodoo/algodoo/algodoo'
There are missing dependencies.
Please make sure that all the required libraries are installed.
Missing:
libcxcore.so.2.1 => not found
libcv.so.2.1 => not found
libhighgui.so.2.1 => not found
jon-Tuxbox:~$
View 1 Replies
View Related
Mar 9, 2010
My recent borked upgrade to -current inspired me to try to come up with a way to sanity-check the lib and bin dirs for broken library symlinks (possibly indicating missing libs) and for binaries and libraries that belong to no installed package, as well as missing dependencies.
This script is the result.
I've checked the script results manually, and it appears to be accurate, so I figured I'd post it here for a second opinion, and/or because others may find it useful too. I'm not aware of another popular method of doing this on Slackware, so here it is:
Code:
View 14 Replies
View Related
Apr 14, 2011
I have a program that uses both Pthreads and OpenMP. Basically, 2 threads (Thread A and B) are created using Pthreads to do work, and in Thread A, OpenMP is used to parallelize a for loop.If I have a global variable that is accessed by the OpenMP threads and also Thread B, can I use the lock in OpenMP to ensure I have no race conditions?
View 2 Replies
View Related
Mar 26, 2011
I have installed OpenMPI from ubuntu repository. However some users need openMp. The problem is I didn't find that in ubuntu repository. Where can I found deb packages? If I must install from source, then is there any conflict between openMp and openMPI?
View 4 Replies
View Related
Jun 16, 2010
I have the file for Conky Wizard ver.1 but in order to run it to make it executable. From what I know, I'm supposed to right click the file and press properties thego to permissions and check "allow executing as program" However, this option is missing. Here is the link to the ConkyWizard Ver1 Beta 1 file.
View 9 Replies
View Related
Jan 14, 2010
My present working is
Code:
linux:/home/anisha/downloads/mapnik-0.6.1/demo/c++ #
Now I want to run "python scons/scons.py" located in
Code:
linux:/home/anisha/downloads/mapnik-0.6.1/ #
I tried
Code:
../../python scons/scons.py
From the above stated PWD but it resulted in the following:
Code:
bash: ../../python: No such file or directory
What is the way to execute a file of some other directory from the PWD!
View 14 Replies
View Related
Jun 16, 2011
Running following script for checking root ssh login status.
Code:
Flag=`cat /etc/ssh/sshd_config | grep "^PermitRootLogin"`
if [ -z "$Flag" ]
then
[Code].....
View 1 Replies
View Related
Aug 13, 2010
I have a USB modem on a Debian install that I want to be able to use AT commands to diagnose, specifically for obtaining signal strength (RSSI). I know the command for this is AT+CSQ but I cannot seem to get the interface for issuing AT commands to work.
The modem is using /dev/ttyACM0 and when I try to use minicom, I type in AT commands and nothing is echoed to the screen (Yes, echo is turned on). Maybe I just don't know how to use minicom correctly.
View 9 Replies
View Related
Jul 15, 2010
Code:
#!/usr/bin/awk -f
BEGIN{ FS=":"}
{
"groups "$1 | getline grps
[code]....
View 5 Replies
View Related
Aug 6, 2010
I have a some c source code files that i have to copy to linux machine from a windows machine over a network. This source code folder has to be copied into a particular directory structure in the linux system at the other end. After copying the file into the appropriate folder in the linux server i have to instruct the linux machine to make(using the make file that is there with the c files) this source code from the windows machine. Does anyone have any idea in regard to how this can be implemented?? i am trying to have a gui client that has the above mentioned options(copying and inserting the c files into the appropriate directory and then for making the files and getting the executable.)
View 3 Replies
View Related
Nov 16, 2010
i want to do a setting to dynamically monitor my Work Station on my Wifi network.
I've got my name server BIND and my dhcpd server all of that under linux working perfectly. But i didn't find any option to execute a script when dhcp give an IP to a machine. I would like to know if there is a way to do that. If there is no options for that i'll use the log files.
View 1 Replies
View Related
Dec 17, 2010
I tried to execute a shell command by M-! cmd RET but it did not work.M-! does not turn up in the microbuffer no matter how many times I press Alt+!.But if I go to Tools menu and select Shell Command... option then it writes M-! to the microbuffer and everything works fine.What is the problem here?
View 2 Replies
View Related
Jun 15, 2011
I am running to a weird issue: for some reason when I try to run a crontab script which has these two operations:
#!/bin/sh
DATE=`date +%F`
but when I reduce this script to the first sql backup only and I use another cron job to put this dump file to the folder it goes through...weird isn't it?so 1+2 in 1 cronjob don't work but 1 in 1 cronjob and 2 in another cronjob it works perfect. any thoughts?
View 3 Replies
View Related
Jan 13, 2011
I have procmail parsing the subject line of incoming e-mail and depositing individual files in a folder that match the procmail recipe.I want to have that recipe spawn a perl script to parse the file to pull out specific information. I've googled this and found many examples but none of them work.When it finds a matching inbound message it logs it correctly in the charge.log file, writes the message in charges/new/xxx but skips the /home/rowan/billing.pl script.
View 2 Replies
View Related
Sep 17, 2010
I got segmentation fault error when I execute "procinfo -a" but not a problem when I just execute procinfo.
View 3 Replies
View Related
May 16, 2011
I want login.sh shell script executing automaticaly whenever i open the console..?and also logout.sh shell script executing automaticaly whenever close the console.
View 1 Replies
View Related
