General :: Default HDMI Drivers ?
May 16, 2010If Linux has default HDMI drivers in it(like how we have keyboard or USB drivers).
View 3 Replies
ADVERTISEMENT
General :: Drivers - Connect HDMI Camera ?
Aug 26, 2011In fedora or centos linux is it possible to connect HDMI camera to HDMI capture device [url]. And get the video for playback from Linux? Or still there will be driver issues?
View 1 Replies View RelatedUbuntu :: Sound Through HDMI With Open Source Drivers?
Jul 12, 2010I have been trying to get sound to work through the open source HDMI drivers, does anyone know how to do this?
I get a perfect picture through HDMI but no sound. The ATI HDMI option is not muted and is enabled. I dont know what else to do. I opened a terminal and did "aplay -l" and I can see the device in there. I DO get sound using the proprietary drivers supplied by ATI, but I get screen tearing and makes the picture look horrible.. So for now its Sound vs Picture quality... Why cant I have both :/
Ubuntu Multimedia :: Hdmi Not Working With Sharp Tv - Drivers ?
Jan 4, 2011I cant seem to get my sharp tv connected to my compaq presario cq50. by hdmi
I followed this:
1. I connected the HDMI cable to my laptop with the TV already on (my laptop was on too).
2. Went to NVIDIA X Server Settings, then to X Server Display Configuration and on the Display Tab I chose my TV (Samsung) as the "model", then configure it so that the TwinView mode was switched on, then I changed the resolution to 1920x1080, position: absolute and then I checked the box "Make this the primary display for the X server" (I guess this is what I was missing in the first place).
3. Clicked on Apply and then my TV started to show what I was doing on my laptop.
My computers reading the tv but when i click apply its still blank and i lose my mouse and boarders on my computer
Ubuntu Multimedia :: HDMI Sound Not Working With NVidia ION Drivers
Jun 4, 2010I have a zotac IONITX motherboard with HDMI video. The video seems fine, but I haven't been able to get the sound working through the HDMI cable. Even the little speaker at the top is gone. It was working fine when I had speakers hooked to the motherboard. I have installed the latest 256 driver from nvidia. If I run 'aplay -l' I get this:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1 Subdevice #0: subdevice #0
lspci -v gives :
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: PC Partner Limited Device 437b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
I don't know if this is important, but I noticed that it says its running an intel driver for my nvidia sound. Could this be the problem and if so, How do I fix it? Also, if I click on system->preferences->sound it comes up with a dialog box that says that its waiting for the sound system to come up. Why I am not getting any HDMI sound or even the little speaker icon at the top?
Hardware :: Unable To Setup Kernel Drivers And Modules For HDA Nvidia (audio Via Hdmi)
Jun 15, 2011I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1
eld_valid 1
monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
Ubuntu Multimedia :: HDMI: Soundchip Of Nvidia GeForce 8600M GT Isn't Recognized - No Sound With HDMI
Feb 21, 2010I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
OpenSUSE Multimedia :: No HDMI Output Pavilion DM3 Laptop NO HDMI
Jun 26, 2010Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
Software :: Reverting To Default Audio Drivers?
Aug 14, 2010Don't know where this issue should go but though it was more to do with software.The issue I am having is that I tried to install Realtek Linux AudioPack 5.15. Once it got installed my soundcard was no longer detected in System > Preferences > Sound. The reason I was trying to install Realtek was due to not being able to get sound working in Wine. But now that I have installed it I'm not getting sound on the desktop and in wine.
View 1 Replies View RelatedFedora :: HDMI Video Output On F14 - HDMI Does Not Appear As Option
Feb 8, 2011I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
Debian :: Didn't Work With The Default Wireless Drivers
Jul 20, 2010I have gotten Debian working quite well on my Sony Vaio laptop for the past 6 months or so, and it's a very rewarding experience. I however have a small amount of problems that I could not find the answer to through googling or reading Debian instructions.
1) I have an Atheros-based wireless chipset in my laptop that didn't work with the default wireless drivers in Debian. So I replaced them with madwifi drivers and it works great now. However, every time I restart the computer, it defaults back to 1mb/s wireless speed; making me go into root terminal and change the speed with "iwconfig ath0 rate 54M". Obviously this gets a little bit annoying to enter every time, so I am looking for a way to make it automatic. I have looked on Google and gotten some hits but none of them have been successful.
2) Whenever I put the computer on stand-by then return, the wifi refuses to connect. Networkmanager tries to connect then crashes. I have found no hits on this issue with my configuration. Very odd.
OpenSUSE Install :: Restoring Default Graphics Drivers ?
Jan 18, 2010I've lost my GUI while attempting to install the latest ATI proprietary driver. I followed their instructions on how to uninstall it but it didn't give me my GUI back. How do I get back to the default drivers that came with my installation? I have a Radeon 3850.
Booting into safe mode doesn't give me a GUI.
I want to try to reinstall the ATI proprietary drivers eventually. I have them on the hard drive, but I have had no luck installing them using the CLI so far.
Ubuntu Multimedia :: Reverting To Default Video Drivers
Jun 17, 2010When Lucid Lynx came out I did a clean install on my laptop by burning an iso. Unfortunately, I got an annoying bug in which the image would always be wiggly (wavy) in the external monitor. In an attempt to fix the issue, I tried to installed Ati's restricted drivers. Unfortunately, my graphics card (Radeon x1200) isn't supported by them on Ubuntu 10.04, and trying to install it anyway only made things worse.
Right now, I just want it to be back to what it was when I first installed Lucid. Following the instructions on this page, I have already removed the fglrx drivers, and I think I installed the open-source driver. However, I can tell that things are not the way they were when I first installed. By going in "Main menu > System > Preferences > Monitors" I get the usual menu to configure the monitors, except I can't actually configure anything.
There's only one monitor (listed as Unknown), and the system doesn't let me change any of the settings (such as resolution or frequency). The external monitor is showing the same output as the laptop monitor, and doesn't get recognized by the system. I just want to use the exact graphics drivers that came installed in Ubuntu 10.04 Lucid Lynx. But I don't want to do a clean install.
Ubuntu :: Reset Video Card Drivers To Default?
Jun 24, 2010I was messing around with Ubuntu trying to make somethings work. Then i rebooted ,and I wasn't able to turn on Visual Effects. So I'm guessing that I must have replaced my video card driver with a non-compatible one or just removed it without knowing. So I was wondering "How Can I Switch Back To The Video Card Driver Ubuntu Came With?" Without reinstalling Ubuntu? Since I was able to at least switch on Visual Effects with it.
And could you also take a look at: [URL]...
Ubuntu :: Use Hdmi \ Connect Laptop To The Lcd Using Hdmi?
Dec 9, 2010i want to connect my laptop to the lcd using hdmiI have nvidia video card 9200 gs and the driver is installedafter connecting both together nothing happens!do i have to change anything in the system or display settings?
View 8 Replies View RelatedOpenSUSE Hardware :: 11.2 - Epson Stylus SX115 Default Drivers Not Working
May 28, 2010I tried to connect this 3 in 1 device to opensuse 11.2 and none of the default drivers worked.
View 3 Replies View RelatedUbuntu :: Running An ATi Radeon Xpress 200 (integrated Graphics) With The Default Drivers?
Jan 30, 2011I've found that whenever I play a 3D game on Ubuntu, the graphics go crazy and make the game unplayable. I've found this an various games such as SuperTuxKart and Alien Arena.By the way, I'm running an ATi Radeon Xpress 200 (integrated graphics) with the default Ubuntu drivers.
View 3 Replies View RelatedFedora :: Graphics In The Program Maple Doesn't Work Properly With The Default Drivers
Nov 1, 2009I had originally followed the advice at Mauriat Miranda's Fedora Nvidia Driver Install Guide [URL] for installing nvidia's display driver on my HP Pavilion system 64 bit running Fedora 11. I had used his first method which just installs the relevant kernel module kmod-nvidia from RPMFusion. He also suggested an alternate method: obtaining Nvidia's installer NVIDIA-Linux-x86_64-185.18.36-pkg2.run and using that. I downloaded it from Nvidia, but I didn't run it.
I recently lost X. This had happened previously after a kernel upgrade, and I just used grub to boot an earlier kernel to recover X, and then installed the upgraded kernel module to fix the problem. But this time, being deeply involved in something else, I panicked slightly, and, using dumb terminal mode I ran the Nvidia installer. It asked me to make various choices and in response to my answers, it decided to compile a new kernel module. This recovered X, but I then compounded things by installing the updated kmod-nvidia.
I realized afterwards that using both methods might create some conflicts, but X seemed to run properly. (I can tell because graphics in the program Maple doesn't work properly with the default drivers provided by Fedora 11.) Since then, when I restart nvidia, I get.
[Code]....
Fedora Hardware :: Enable The Gnome Shell With An AMD 6950 Graphics Card And The Default 15 Drivers?
May 25, 2011how to enable the Gnome Shell with an AMD 6950 graphics card and the default Fedora 15 drivers? I may try the AMD Catalyst proprietary drivers but from history those usually lag behind the Fedora versions. I also read some people had issues with the current AMD Catalyst drivers in the Catalyst guide thread.
Also, the AMD 6950 graphics card fan is at full speed all the time in Fedora 15. I do believe you can with the Catalyst drivers using aticonfig but was wondering about the default Fedora 15 drivers?
General :: Use HDMI Vid / Snd?
Sep 25, 2010I have Ubuntu and Mint, how would I be able to to use HDMI vid/snd thru Linux?
View 7 Replies View RelatedFedora :: Does Fedora Come With Open Source Drivers Installed By Default Too?
Feb 5, 2011i understand ubuntu comes with opensource ati drivers installed by default?(Correct me if I am wrong)So does Fedora come with open source drivers installed by default too? or do i need to install them as well.I have radeon x700 card...and there is only one game that i would like to play on fedora 14 is Warhammer 4000: Soulstorm (2008 game)Will the open source drivers be enough or do i need to install the proprietary ones...(and is it hard?).
View 1 Replies View RelatedGeneral :: Get HDMI Audio To Be Visible To `aplay -l`?
Jul 18, 2010I've got a new machine with an Nvidia GeForce 210 graphics card with HDMI output. I'm trying to get sound to go out that HDMI cable, but although the device shows up on lspci, I can't get it acknowledged by aplay -l, which lists the audio devices known to the audio driver.
lspci shows (in part): 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) The first is the motherboard audio, and it works fine. The second (I assume) is the graphics card with HDMI. But aplay -l lists only the motherboard analog and S/PDIF outputs:
[Code]...
I can't see how I'm going to select a device that the drivers think isn't there. how to make that device visible to the sound drivers? I'm running Ubuntu 10.04 with a 2.6.32 stock kernel. The Nvidia driver version is 195.36.24.
General :: Revo 3610 Not Doing HDMI Handshake?
Sep 12, 2010I am having a problem with my Revo 3610 which is connected to my TV via HDMI.
For some reason it will not do the HDMI handshake with the TV, so my TV does not think that there is anything in the HDMIport.
I have tested the TV and it works fine with my laptop and DVD player.
It does work sometimes, but this time it's failed for two days in a row. I've tried rebooting and turning the TV off and on, but nothing helps.
I can trick the TV to listen to the HDMI by connecting with my laptop and then changing the HDMI back to my revo; this results in the image going through nicely but there is a big fat "Check signal cable." message on the screen.
I have also tried changing the resolution in the revo but this does not help either.
General :: Debian Squeeze - No Hdmi Port?
Nov 9, 2010I have an Acer Aspire 5542 & I decided to move from Ubuntu to Debian Squeeze .Everything is working fine bar the hdmi port .When installing Squeeze I used the Radeon driver (open source one,),That installed correctly but when I select dual monitors the OS picks it up but the TV itself just stays black.The graphics card is Ati Radeon HD 4200Here is my xorg.conf file
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
[code].....
General :: HDMI Connection Under Dual Boot?
Oct 8, 2010i'm new in linux and i have a problem with my hdmi lcd under linux. To be more precise , my graphic card is an Nvidia GTX 295 with hdmi output to a Dell 2408W LCD screen and the problem is that linux can't see the hdmi connection, working just with DVI or VGA. I also have Windows 7 in dual boot with linux and in windows it works just fine. To mention that i tried several linux distributions: Ubuntu, Ubuntu ultimate 2.7 and Sabayon 5.4.
View 1 Replies View RelatedGeneral :: HDMI Support In Driver Code?
Nov 10, 2010I want to know whether by default Linux supports HDMI? If yes, where can I find HDMI support in Linux driver code?
View 2 Replies View RelatedGeneral :: Can't Get Sound Thru Hdmi Only Audio Jack?
Dec 27, 2010I have a 1080p video card installed via PCIe and can't seem to get sound to work on my big screen tv unless i use a audio jack and stereo.
View 7 Replies View RelatedGeneral :: HDMI Only Show Picture And Not Sound?
Mar 1, 2011complete noob, please forgive me if this has been covered a million times, butMy asus F9e laptop, shows picture ok on my plasma tv, but the sound doesn't - I'm running ubuntu 10.10
View 4 Replies View RelatedGeneral :: Nvidia - Can Play HDMI 1.4a 3D Stereoscopic Content
May 16, 2011I'm aware that there are no Bluray players for Linux but I'm wondering if it's possible to play Full 3D HD (1080p, Side-By-Side) MKV files (or Bluray BDMV folders, etc).
Full 3D HD files are actually two 1080p frames "side-by-side" so the effective resolution is 3840x1200. In order to play these properly the software needs to switch to TV into 3D mode (or however HDMI 1.4a works).
I don't think simply playing the 3840x1200 resolution file will work so are there any options out there?
General :: Can't Get HDMI Working On Dell Inspiron 1525
Dec 27, 2010I'm on a Dell Inspiron 1525 running Arch Linux with an Intel 965 GM video chipset (from dmesg). I'm using the xf86-video-intel driver, and Xorg (using xfce4) works flawlessly, including compositing. Before getting into details about the HDMI, I'd like to ask why I don't gave an xorg.conf.d/10-moniter.conf, it's not there, just evdev, quirks, and synaptics (because I figured that moniter.conf could be modified to include HDMI). So, basically when I'm on my XFCE4 desktop, I plug in the HDMI cable and to the TV, and on windows, it would would work, but on Arch the TV just says: "No input", and my desktop just stays the same, so absolutely nothing happens. If I have it connected upon bootup, the HDMI displays (the BIOS and grub menu on the TV) until I select to boot Arch linux on Grub, then the tv screen goes blank. I've tried Googling this but I got no decent results, just a bunch of random posts of audio not working with Nvidia.
PS - I did dmesg and lspci (with grep HDMI) and no results, so maybe it doesn't even recognize it, but then what do I do? There's obviously Linux support for HDMI...
