I need to install/configure a server (dns, dhcp, etc) and since im running Debian I want to configure a Debian server, but i want to do it on a virtual machine, cause i dont want to have all that stuff on my system, now Im wondering whats the best screen recorder that i can use on Debian for this purpose.
View 3 Repliesi'm trying to configure my dhcp server but without success. i've installed dhcpd apt-get install dhcpd-server then i've added the following line to my dhcpd.conf
host foo{
hardware ethernet 00:00:24:C9:5A: D0;
fixed-adress 169.254.81.51;
filename "pxelinux.0";
[Code]...
Setup a DNS/DHCP/Directory server on Debian? I would like to configure the things in Debian so that can join Linux and Windows(if possible as m not sure yet) clients to the directory server. Any links to setup both Forward and Reverse lookup zone in the environment.
View 4 Replies View RelatedI am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
I am trying to install Ubuntu server edition on an old HP XT963 that recently came into my possession. I mainly just wanted to use it as a home file server and print server. I have been running ubuntu desktop on my laptop for a little under a year, but this is my first go at the server edition.
While ubuntu was installing it said "network autoconfiguration failed," I hit continue, thinking I could figure out how to configure it later. After lots of googling I still haven't figured out what exactly is wrong.
Code:
auto lo
iface lo inet loopack
after googling around I made it look like:
[Code]...
I would like to provide more information such as ifconfig and any other commands but I'm not exactly sure how I would do that without being able to copy/paste. I guess I would have the command dump the output to a file, but I'm not familiar with the -options this being my first time CLI-only.
I want to do a screen capture with audio and video. I use Ubuntu 10.04 64-bit.I have now spend about half a day trying various tools, most of which seem to be half finished or abandoned. I have not found any usable docs for any of these.gtk-recordmydesktop and xvidcap will both capture video, but seem unable to capture audio from a microphone. The mic is connected and the sound preferences "input" tab shows the input level jumping up when I speak, so it must be working.
I tried the pulse audio device chooser app to make sure the mic is selected, but the choices for input are DEFAULT and "other", which shows a blank input with no choices.xvidcap multi-frame dialog has dev/dsp pre-selected as the input device, with no other options. It does not work.If I enable audio with gtk-recordmydesktop, it refuses to start and says it cannot open the sound card. There is no apparently no way to do this using the "advanced" dialog which has DEFAULT preselected as the audio input device and no other options. /dev/dsp also fails to start.I spent some time searching google and the forums here, to no avail. So should I give up trying to do this with Linux or is there some obscure method I only need to discover?I prefer xvidcap, since the ogg format output by recordmydesktop seems to be a write-only format.
I want to create a dedicated DHCP server in Red Hat Linux for a small office with a private range from 192.168.1.10 to 192.168.1.20
View 10 Replies View RelatedI have installed RHEL 5.1 in VMWare 6 I want to configure one RHEL Server with DNS & DHCP Also I would like to PXE boot, whenever I create a new VMWare Client(RHEL), the installation should be initiated via network boot
View 2 Replies View Relatedhere to learn some good technical stuffs
View 6 Replies View RelatedHow to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies View Relatedi'd like to configure a dhcp server on my RHEL 5.3 or Fedora 14, since i don' have a legitimate DNS server....n it asks for option domain-name " "what do i put in there.. me got two nics for my WAN(dhcp enabled) n LAN...i just want to parctice at home for my future job...
View 3 Replies View RelatedThis is probably an odd request, but figured I'd ask in case someone knew. We have a lab that has the IP range 172.10.0.0/16 (255.255.0.0). The lab gateway/DHCP assigns an IP in the range of 172.10.0.2-172.10.0.254. I want to set up my own DHCP server on a specific range, for example 172.10.10.1-172.10.10.254. I create a new host fine, but since it's set for DHCP, it uses the DHCP server at 172.10.0.1. Is there a way to force it to use a different DHCP server on the client side? I realize that I can work around this with exclusions on the 172.10.0.1 DHCP server, or use iptables to deny DHCP requests to specific MACs, but wanted to know if there was an (easier?) way to configure the client to use the 172.10.10.1 DHCP server instead of the 172.10.0.1 server?
View 1 Replies View Relatedhow to configure DHCP server on centos linux and how to configure FTP server on centos linux
View 2 Replies View RelatedI'm a newbie to Linux and need some help in DHCP client configuration.
I'm trying to find a way to set hostname at the start up and get the DHCP client to register itself after it received an IP address.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
how to configure dhcp server in a local lan network
View 2 Replies View RelatedI've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
[Code]...
I'm trying to configure a DHCP server but when I try to start it it just fails.
Code:
log
Jan 10 16:25:52 SRV-LINUX00 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
[code]....
i already have an eth0 configured to automatically get its info from dhcp.
but i wanna configure eth1 to be able to serve dhcp and dns. i havent configured either dns or dhcp server on the server box since i have not configured the serving interface.
so far my interfaces file is:
Code:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
[Code]....
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedI'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
I need to place an Ubuntu machine on a network where I have a DHCP server which does not configure the Degault Gateway parameter (we don't want ordinary users to browse the internet). Is it possible to leave the machine using DHCP and define the Default Gateway manually (as in Windows XP i.e.)? How?
View 1 Replies View RelatedI'd like to be able to record what's playing on my sound card. How do I do this, with audacity or whatever? There seems to be little information around and what of it I've tried has got me nowhere
View 2 Replies View RelatedFor some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
I want to install configure and run my own mail server in my debain box, but I don't know which programs to install(This is my first mail server installation). I found on internet some how-tos for install postfix-dovecot-squirrel mail, but I am not sure that I want dovecot(I prefer courier email server if it is the same).
As I understand I need
smtp mail server -> postfix Mail Transfer Agent
imap and pop3 -> dovecot / courier email server?
webapplication -> squirrel mail
For squirrel mail I am sure that i will install it(I used it on other server and I like it), but don't know for other parts. I read that postfix is good choice, but what other options I have for dovecot?
I wanted to setup my server as a router/gateway just for educational purposes and also when it succeeded i will keep the gateway and place it on the front line right after my modem.
My current setup as it is now :
The GATEWAY/ROUTER will be doing the main work to act as a dhcp server and firewall.
Now my setup as it is now :
So now what i ment to do was :
Let the clients connect to the gateway via ETH1 and all the stuff being router to ETH0 which is the NIC that is connected to the internet.
But now i have two huge problems :
1. The DHCP configuration seems to be fine the client machines get their ip adresses and /etc/resolve.conf looks fine to. But somehow the GATEWAY/ROUTER wont let me use the specified external DNs server so i cant do anything on these machines.
2. The firewall script [url] at line 27 should be DROP but if i use this line of code the GATEWAY/ROUTER cannot use his dns server settings so when i try to browse the internet or ping a machine outside my local network it would came up with nothing.
I'm trying to connect to my server (to the gnome session) using vnc. I run vino-server on debian
I get pass the authentication (configured none) but I get a blank screen instead of my session.
Log from vino on the console:
root@B10-20-30-4:/etc/vnc# /usr/lib/vino/vino-server
** (vino-server:2547): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-7l6BcHLxb5: Connection refused
(vino-server:2547): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion 'global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed
20/03/2016 05:20:28 PM WARNING: Width (3046) is not a multiple of 4. VncViewer has problems with that.
20/03/2016 05:20:28 PM Autoprobing TCP port in (all) network interface
20/03/2016 05:20:28 PM Listening IPv6://[::]:5900
[Code] .....
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
I've been using Debian Squeeze for a few years now, no troubles connecting to a DHCP server in PPOE session... (DSL service) until this morning (11.29.10) when now I do (that is to say; browser, email prog., terminal, real player, etc., just won't connect). I can do dual boot, & so am in Windows XP at the moment.
View 12 Replies View Related