General :: Compile Multiple File Using Makefile ?

Jun 1, 2011

How to compile single file in Linux environment using gcc. Now i dont know how to use make file to compile multiple file.

View 5 Replies


ADVERTISEMENT

General :: Using Makefile - 'Multiple Definition' Compile Errors

Mar 1, 2011

As part of an assignment, our class was given a small set of c++ classes which are compiled using a makefile. As part of the assignment, I have created a namespace and saved in it a .cpp file. The functions, constants and typedefs from the namespace are now used in one of the original files, and so I added an <#include MyFile.cpp> to the file I modified, in addition to a using MyNamespace;

When I try to use the original makefile, the compiler gives a lot of errors about multiple definitions of every function in the namespace. What do I need to do to resolve this? Do I need to change the makefile or one of the files themselves? I am new to Linux programming and makesfiles.

View 2 Replies View Related

General :: Compile Multiple Source Using Single Makefile In ECos?

Jun 3, 2010

I'm calling a function defined in "uart.c" from "main.c"

But on "make" using cygwin bash, it's giving an error:"Unreferenced function"...
Pls help me to overcome this problem.

If i'm putting the definition of that function in "main.c" itself, its working.

So pls tell me how to write the make file for it?

View 4 Replies View Related

Ubuntu :: Gopenvpn Compile Error - Cannot Find Input File: `po/Makefile.in.in'

Mar 6, 2010

Ubuntu 9.10 64-bit
Lenovo T400

I'm trying to install gopenvpn from source. [URL] I'm pretty sure I have all the necessary libraries installed.

./configure ends with:
.
.
.
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pixmaps/Makefile
config.status: creating src/Makefile
config.status: error: cannot find input file: `po/Makefile.in.in'

View 4 Replies View Related

General :: Use Make And Makefile To Compile And Link Some .cpp/.h

Sep 20, 2009

I've been trying to figure out how to use make and makefile to compile and link some .cpp/.h. All i seem to find on google says to read the README for the software. But this is my own created c++ project. Im just looking for a simple makefile for my own .cpp/.h files( about 20 total).

I have tried using 2 different makefile "examples" as a template, but neither worked. I am getting error saying "file1.cpp: no newline character at end of file". or something to that degree.

View 5 Replies View Related

Slackware :: Makefile:535: /usr/src/linux-2.6.33.4/arch/i486/Makefile: No Such File Or Directory

May 31, 2010

I just downloaded slackware 13.1(x86) and i'm trying to compile ndiswrapper-1.56 using the slackbuild from slackbuils.org and i'm getting this error:

Code:

Makefile:535: /usr/src/linux-2.6.33.4/arch/i486/Makefile: No such file or directory
make[2]: *** No rule to make target `/usr/src/linux-2.6.33.4/arch/i486/Makefile'. Stop.
make[1]: *** [modules] Error 2
make: *** [all] Error 2

looks like the folder i486 doesn't exist

View 2 Replies View Related

Programming :: Tell Makefile Not To Compile Debug Code?

Mar 4, 2010

I've been trying to work out a way to stop chunks of code being compiled using a variable in my makefile but can't work it out. What I mean is for example in my code I might have.

/****output comms portdata********/
printf("
debug comms port %d",ReadPort("ttys1);

I only wish this code to be compiled when I'm debugging. What I've tried is using #ifdef with

#ifdef COMM_PORT_DEBUG
printf("
debug comms port %d",ReadPort("ttys1);
#endif

Then in my make file I set COMM_PORT_DEBUG to 1 so

DEBUG_DEFS = COMM_PORT_DEBUG=1

I then thought I could put it into my in my link line

all: $(CC) $(CPFLAGS) $(DEBUG_DEFS) $(INC_PATHS) $(SOURCE) -o $(PROGRAM) $(LIB_DIRS) $(GAME_LIBS)

but this gives a

gcc: COMM_PORT_DEBUG=1: No such file or directory

is there a way to do this sort of thing? Or am I barking up the wrong tree?

View 1 Replies View Related

Programming :: Compile And Build Program Using A Makefile Template?

Jul 8, 2011

I am new to the whole concept of makefiles, and I'm trying to compile and build my program using a makefile template I have found. My project consists of three directories: "source", where my .cpp files are (source1.cpp, source2.cpp, source3.cpp), "include", where my .h files are (header1.h, header2.h, header3.h), and "obj", where the object files are to be stored (obj1.o, obj2.o, obj3.o). In the project root directory is my makefile, which is as follows:

Code:
EXEC = myexe
CC = g++
IDIR = include
SDIR = source
ODIR = obj

[Code]..

View 4 Replies View Related

General :: Makefile - Break Out The Compilation Into Individual Gcc Commands For Each C File

Apr 28, 2010

I have ~200 c files in my makefile[$(SRCS)], and it compiles all of the files using a single gcc command. So each time I make a change in one c file, it ends up re-compiling all the files, then linking to make the
binary. How can I break out the compilation into individual gcc commands for each c file, so that make checks the timestamp and accordingly compiles only the modified files.

My current Makefile looks like this.

clean:

View 5 Replies View Related

Programming :: 'makefile' \ Errors Are Mainly Due To Multiple Declarations Of The Functions?

Nov 24, 2010

This is the makefile....

Code:
animesh:main.o input.o bsort.o output.o
gcc -o animesh main.o input.o bsort.o output.o

[code]....

View 7 Replies View Related

General :: Compile And Run A Cpp File Using Only One Command?

Jun 24, 2010

Recently I've started to learn cpp language on linux,and now I run a cpp file using following commands. g++ -o xxx xxx.cpp./xxxIs there a way to make it one line command such as compile-and-run xxx.cpp?

View 5 Replies View Related

General :: Not Able To Compile Source RPM File

Oct 15, 2010

I am trying to build a source rpm file through a source rpm package but while compiling I am getting the below errors as,

[root@nisserver tmp]# ls
gconfd-root mapping-root ssh-kvrIrp2633
keyring-fgwCIY nmap-5.21-1.src.rpm virtual-root.2hSYRa
keyring-vx1pvB orbit-root

[root@nisserver tmp]# rpmbuild --rebuild nmap-5.21-1.src.rpm
Installing nmap-5.21-1.src.rpm
warning: user fyodor does not exist - using root
warning: group fyodor does not exist - using root
warning: user fyodor does not exist - using root
warning: group fyodor does not exist - using root
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.49535 .....

RPM build errors:
user fyodor does not exist - using root
group fyodor does not exist - using root
user fyodor does not exist - using root
group fyodor does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.73783 (%build)

What next step need to be taken to install the rpm file from the source file.

View 6 Replies View Related

General :: Shortcut To Compile Kernel File?

Nov 5, 2010

I become successful to download kernel, compile it and run it.BUTWhen i modify tcp.c file or any other file in this /usr/src/linux/net/ipv4 location, (just modifying c files) i have to compile the complete kernel every time, which is very time consuming procedure.So Please help, How to compile that net/ipv4 package or etc.

View 5 Replies View Related

Programming :: Multiple Files To Compile By G++?

Jan 12, 2011

how i could compile for example: a tutorial file of cantera open source files. when i do :g++ example.cpp -o examplei get huge errors such as the header files are not here,...please tell me how i could compile it. ofcourse i have configured the full opensources and i see in /usr/local/cantera/binthat the files are there but i still can not compile and execute any cpp file.

View 2 Replies View Related

Programming :: Calling Gcc From Executable File / (makefile)

Oct 4, 2010

I am trying to use a software package written in ANSI C. It has a makefile which has to be executed first.

As soon as I execute it I get messages like: line i: command not found.

Commands for which I am getting errors :

CC = /usr/bin/gcc
GCCFLAGS = -c -Wall
ROOTDIR = .

My gcc compiler is located in the above directory only. In ROOTDIR also I tried giving the path in which all the required files & folders are present but still I get the command not found error in all the lines.

View 7 Replies View Related

General :: Compile An Application And An Driver File For ARM Platform?

Apr 22, 2010

I am new to the embedded domain.I am learning about cross compilation. Just i want to compile an application and an driver file for ARM platform. I have downloaded the toolchain binaries from [URL]..

View 3 Replies View Related

General :: Compile A Pascal Object File With A .o Extension ?

Mar 27, 2010

I have been trying to compile a pascal file using fpc. I succeeded using the command fpc pas1.pas, but this gave me a new object file pas1.o. How do i compile this file to get my output. gcc -o pas1.o does not work.

View 2 Replies View Related

Software :: Makefile - File Not Recognized - File Format Not Recognized Collect2 - Ld Returned 1 Exit

Mar 27, 2010

I was installing DYMOUM from [url]. "make" command is issuing this error:

Code:

Prior to this, ns-2.34 was working fine. Patches are applied very well.

I am in under fedora 9 and:

Code:

View 9 Replies View Related

General :: Can't Compile Gcc - Fatal Error: Stdio.h: No Such File Or Directory

Feb 19, 2011

I am trying to upgrade my NAS with anew toolchain, gcc-4.5.2. The NAS have been "hacked" fonz_plug, that contain a gcc version 4.1.3 with uClibc. I have download all needed tar files and done the following.My goal is to upgrade the gcc to 4.5.2 and replace the ucLibc on the system with a GNU libc.

# Pass one
#
# binutils
./configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --with-gmp=/ffp --with-mpfr=/ffp
But when I try to compile the gcc with
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-__cxa_atexit --with-float=soft --enable-languages=c,c++ --with-build-sysroot=/ffp --with-build-time-tools=/ffp/bin --with-system-zlib --enable-threads=posix --disable-bootstrap

[Code]...

View 6 Replies View Related

General :: Use Compile File Build Package Without Messing Up Library

Apr 11, 2010

I want to build a package from source using src2pkg, but I don't know how to avoid library miss match. Suppose I have Firefox 3.5.2 on Slackware 13.0 64 and I want to upgrade it to 3.6.2. Last time when I venturesomely installed Firefox-3.6.2-current into my Slackware 13.0, I got library miss match. Thus, instead of upgrading the whole packages to current (which is impractical and cumbersome), I want to build 3.6.2 from source. How can I do this? Is there any guideline how to use src2pkg? Or should I rather use makepkg? Do I need to create a Makefile?

View 7 Replies View Related

Ubuntu Networking :: Wireless Dongle Makefile Nightmare - Don't See The Driver File In The Folder Contents

Apr 1, 2010

I'm trying to get my new Wireless USB dongle to work with Xubuntu 9.10 Karmic Koala. I've extracted the .rar file that was on the drivers CD that came with the dongle. According to the ReadMe....

The Model Name is: RT2870 Wireless Lan Linux Driver Driver Name: rt2870.o/rt2870.ko Hardware: Ralink 802.1n Wireless LAN Card Description: This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card. My issues:

1. I do not see the driver file anywhere in the folder contents... I suppose that I have to "build" it.
2. In the makefile the chipset is default set to "CHIPSET = 3070" & the folder that holds all the extracted files is named 2008_1128_RT3070_Linux_STA_v2.0.1.0 so I'm confused as to whether this dongle has a 2870 or 3070 chipset inside. Does it matter?
3. Sorry, I'm a bit of a n00bster when it comes to all this, but I'm having some problems with the build instructions. It reads:

[Code]...

View 9 Replies View Related

General :: Tar Multiple Directories Into One File?

May 15, 2011

I have found ways to tar a directory and exclude certain directories but is there a way to simply tar multiple directories (they are in the same directory) in to one .tgz file?

View 8 Replies View Related

General :: Samba File Permissions For Multiple Groups In The Same General Path?

Nov 4, 2009

I'm using my Linux (SLES 10) server as a File Server at this point. I need to set File Permissions to nested folders differently to different groups. For example:

homesharedengineering* should be read only for groupA
homesharedengineeringadmin should be read & write for groupB Plus read only for groupA
homesharedengineeringautocad should be read & write for groupC Plus read only for groupA

I've been using Webmin and Putty to set permissions but Putty only allows me the Default Group, it won't allow me to set several groups on the same directory. Webmin seems to allow me to add multiple groups (Webmin --> Others --> File Manager --> Info & ACL tab will provide extended abilities) but when I add multiple groups, they don't seem to take effect? I'm wondering if my setup at the 'Share' level or at the hierarchy of my folder structure (unix based) needs to be set specifically?

View 1 Replies View Related

General :: Copying A File To Multiple Machines?

Mar 7, 2011

Is it possible to copy a file on multiple remote machines through scp in one command?

View 3 Replies View Related

General :: Gzip Multiple Files Into One Gz File?

Mar 29, 2011

I have 100 files: cvd1.txt cvd2.txt ... cvd100.txt

How to gzip 100 files into one .gz file so that after I gunzip it, I should have cvd1.txt, cvd2.txt ... cvd100.txt separately?

View 4 Replies View Related

General :: Multiple File (Directory) FTP Transfer Via SSH

Jun 12, 2009

I'm trying to transfer a directory, and all it's sub-directories and their contents, to another FTP server via SSH. I'm using CentOS Server 4.4. I can 'put' a single file, but can't figure out how to do everything at once, which I need to do.

View 5 Replies View Related

General :: Split A File Into Multiple Files Using AWK?

Aug 5, 2010

I have a file with 5 columns. Column 4 contains numbers.Is it possible to split the file into multiple files using a condition for the contents of column 4 i.e if column 4 contains a value between 0-10 then print the lines to a new file called less_than_10.txt

View 1 Replies View Related

General :: Parsing File With Multiple Delimiters?

Jun 21, 2011

I am using nessus to scan systems, and it generates the report file without any specific delimiter. Shown below is how a typical line in the file reads (It might show up as a very long line.

Code:

xx.xx.xx.xx|cpq-wbem (2301/tcp)|49272|REPORT|Synopsis :;;The remote web server is affected by multiple vulnerabilities.;;Description :;;According to its self-reported version number, the HP System;Management Homepage install on the remote host is earlier than 6.2. ;Such versions are reportedly affected by the following ;vulnerabilities :;; - Session renegotiations are not handled properly, which; could be exploited to insert

[code]....

The field of interest (for me) are IP ADDRESS, Synopsys, Description, Solution and Risk Factor. I tried the following command to parse this:

Code:

sed s/:;;/|/g report.nsr | grep Risk Factor |High | awk 'BEGIN {FS = "[:][;][;]"} {printf("%s|%s|%s|%s",$1, $6, $7, $10)}'

But this would not give desired results as ':;;' is not a standard delimiter and hence gives incorrect results. how to grab everything that occurs between the strings 'Synopsys', 'Description', 'Solution' & 'Risk factor' in the above example? In other words i may be asking to use multiple delimiters.. in the order of occurance.. is there a tool that supports multiple delimiters?

View 7 Replies View Related

General :: Attach Multiple File Using Mailto?

May 11, 2010

I am trying to set-up a script that will go to the folder and attach all files from that folder to the email without having to specify name for each attached file.

Below script requires exact name of the file and then puts file context into the emails body.

cd /home/denis/Test/

mail -s "log files attached" smith_denis@ymail.com <log.txt

View 4 Replies View Related

General :: Grep Multiple Lines From A Text File

Jun 17, 2009

I have a list of words that I want to grep in many files to see which ones have it and which ones dont. in the text file I have all the words listed line by line, ex: list.txt:

check
try this
word1
word2
open space
list ..

I want to grep each line one by one. like I want it to

grep "check" *.log
grep "try this" *.log
grep "word1" *.log .. etc how can I do this?

and maybe write the output to a file.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved