General :: Changelog For File When Moving To A Different Repository?
Jul 16, 2010
I am versioning my config files with git. Now I need to move some of my config files to a different repository, to achieve a clean structure. Is there a way I can keep the change log for a file if I move it to a different repository? I would like to have all commits of repo A in repo B that touched file A/a if I move it to B/a. Ideally, if I afterwards move A/x to B/x, I would want to see B/a and B/x appear together in commits that touched both files in repository A. I would not expect to have any development step of A/a merged into any of the commits of B, I just want them to appear there afterwards.
I am pure fresher in cvs, svn, git administration. we bought new server and now I want to move above repositories from old servers to new server. Becuase old servers are not having enough free disk space & having very lower configuraion. So how to move cvs, git, svn repositories from old servers to new server. But these repositories also should be in old servers becuase once when developers confirm that everything is working fine then we will completely replace the old servers with new.
I want to track 2.6.33 kernel releases. I can see that kernel.org has couple of releases like rc1, rc2,rc3, git<>. Kernel 2.6.33. got released early Feb this year. So How many releases of kernel 2.6.33 were there? I checked at kernel.org but couldn't find the complete information.
After moving to Lucid, I have no flashplayer. Eventually, I tracked the problem to a missing Cannonical repository. I inserted the line in the sources list: [URL] Now Synaptic reports:
E: Type [URL] is not known on line 45 in source list /etc/apt/sources.list E: The list of sources could not be read. Go to the repository dialog to correct the problem. E: _cache->open() failed, please report.
I have re-checked everything I can think of, and remain baffled!
I'm told to go to /home/jbander/Downloads, so how do I do that, I assume you do it in terminal but what do you do next, I can get to home but thats it. How do I go from one directory or file or whatever they are, to another and once I'm there what do I do to see what is in the download file. One more question if I want to change it from e.g. cow to e.g. duck how would I do that(they are just arbitrary names) how do I get rid of cow and how do I put duck in it's place.
In vim, how do I go to a given line? In particular, how do I go to the top of the file or to the bottom? And when searching, how do I unhighlight the found words
Objective: To move or backup all the 30 days old files to the other server within LAN. I have tried testing it first within the server by performing below commands: find /usr/test1/* -mtime +30 -exec mv {} /usr/test2/ ; But I'm getting "mv: missing file argument" error when I try this.
i have kown how to lock file in subversion,such as ' svn lock tree.jpg' but i don't down how to lock file folder, i create the repositoryroject1 project1/trunk /tags /branches /branch_user1 /branch_user2 i need to lock a branch before merging and how to unlock the branch after locked
I've been trying to get my wireless working on the livecd to make sure its possible before I install it, but, I get a ton of errors when I install RPM's
Code:
Traceback (most recent call last): File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 1649, in install_files txmbr = self.yumbase.installLocal(inst_file)
[code]....
RepoError: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. verify its path and try again I get that one trying to install a driver installer from [URL]
when i was trying to install perl with fedora using yum: # yum install perl i got the following error: Loaded plugins: presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
When I tell yum to update i get this error, Quote: $ yum update Loaded plugins: presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) for repository: InstallMedia. Please verify its path and try again
I had need of putting a file in one of the directories of the $PATH.The echo $PATH is/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/Majara/binI did in the terminal:mv file /home/Majara/binI have learned now that /home/Majara/bin isot a directory, but the file is not anywhere
My temp file is currently located int the root partition which is a a relatively small partition. As it is, if my root partition id more than half full I am unable to make a backup of the whole system. I would like to move that folder into the home partition and maybe even make it a hidden folder. Since a lot of apps depend on the other folders within the temp folder - what I am wondering about is whether I can just move the folder or if I need to be concerned that those apps will not be able to find the folder then. Would I end up needing to go into every app that uses it and change settings? Is there things within the o/s that use it that I would need to reconfigure or something?
Ubuntu 11.04 with the Unity Desktop on a HP ze2000
I have installed fedora 11, now i want to install touch driver for my dell 15 laptop. when i m moving cursur its moving but when i m clcking on touch pad to open anything its not opening, to open i have 2 select any file then i have to click touchpad keys.
I'm using Ubuntu 7.04 on a live boot right now so I can move from files from a hard drive on a computer that won't boot. This is my work computer, which contains about three years worth of accounting and inventory information that I absolutely must recover from the drive. The computer runs one SATA drive, and has no ports for additional drives. Otherwise I have two USB drives connected and an IDE connected through a USB adapter. (The SATA drive will not work through the adapter for some reason). I have absolutely no access to another computer with SATA support.
All the drives mount on 7.04, and I can view the files on the SATA drive - which leads me to believe the drive isn't completely dead. So i'm hoping to move the files I need over to one of the USB drives.
However, i'm getting flags when I move files. -Without- installing Linux, is there a way for me to grant myself permissions to move/copy/delete files on my hard drives? Otherwise, is there a simple way (that won't compromise the data on the drive) for me to re-do the partitions the SATA drive so I can install linux?
I like the buttons on the left. I'm running 10.04 & I know how to move them. The problem is that changing themes will move them back right. OK, if the new theme has them on the right that's OK. But going back to the other theme doesn't change them back. They don't seem to be controlled by the theme, or I'm just not doing it right.
Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets. Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
I have an obsession of packing a large number of distros into one hard disk. Many distro installers do not like it even though their kernels can support higher number partitions. Typically an installer, say from a Debian family, would freeze when checking a hard disk that has more than 15 partitions. However if I put the same distro on a hard disk with less than 16 partition the installer will be very happy to install. I then copy the distro back to the original disk to a different partition, change the boot loader setting and fstab and the new distro will be happily working in the next hard disk that has 57 partitions.
This scheme works for any distro until recently Fedora refuses the move. I didn't investigate the cause then but I have just come up against a brick wall with the Red Hat Enterrise Linux 6. It was one out of the 4 I just moved. The others are operating happily. The RHEL will boot to a Grub screen. When I select the user account and type in the password it just refreshes the screen as though the password could not be accepted. I can boot up another Linux, mount the RHEL partition, change root to it and change my normal user password. Better still why don't I create a new user and another password.
Same result. I could not pass the log in screen with revised password or from a new account which got displayed. How about a little trick told by Justlinux library file --> to alter the run level. So I mounted the RHEL partition, changed root to it, edited the /etc/inittab and amended the run level from 5 (for X desktop) to 1 (single user - terminal mode). RHEL now boots to a root terminal! Success in a sense that my RHEL boots as expected and there was never a problem with booting. However newer Linux do not permit root log on to the desktop so I cannot check the log in with the ordinary user account to X. After I fiddled with the various files/parameters related to the gdm and X still no joy so I cut my loss and post the question here.
I try to setup a HPC cluster with CentOS 5.5. But now there is no Internet connection available in the room where the hardware is located so I set up ntpd server using synchronization with local clock (maybe I do something wrong). Here is my ntp.conf file on a master node (the master node has IP 10.0.1.1, a file server has IP 10.0.1.2 and compute nodes are 10.0.1.3..10.0.1.11, comments are omitted):
Any time I try to install software building it from source when I run make I get a waring "Clock skew detected. Your build may be incomplete". Some software build successfully and run normally after install but some build tasks are failed for example when I try to build RPM's via 'make rpms' for BLCR I get an error message about invalid date in changelog. But the system date seems to be right. I suppose I have invalid settings of NTP.
I have an external hard drive that needs to be readable and writable between MacOSX, Ubuntu, and Windows. I also need to work with files over 4gb in size (which can't be done with Fat32, which happens to work with all 3 OS's) I tried MacOS journaled, that didnt work. Before I start reformatting and doing a bunch of guess and check, I wanted to know if the answer was known.
I have a bunch of .7z files in a directory, and I need to put each one of them into a separate directory, named after the file (without extention). The command line I use:
I'm starting bash shell script and I'm looping without any solution.
I'm trying to find some files under a folder hierarchy and in case of errors moving these files to a destination folder under the same hierarchy recreating this hierarchy if not exists.
Finding all ._* files under /src and moving them to /dest recreating folder1 or the others which contains ._* files but without moving files which does not correspond to the pattern.
Code:
I tried find command and I'am getting all needed files
Code:
But I don't know how to use the output to get the parent folder of files which are found to
1- create folder with mkdir -p /dest/folder1 or /dest/folder1/folder4
2- move found files from /src/... to /dest/... with rm command
I'm working on a find command as this trying to do all in the same line but ... little lost
I am running Ubuntu 10.10 as my OS. I also have an .iso file of OpenSuse. It has a lot of packages on it. Can I add it as local repository so that instead of downloading the files from net, if they are available on DVD then I can use them.
