i was trying to install windows xp on vbox, but the cd wont work, so i want to make an iso image from the cd and run it from that. after some research, i found this code to use disk dump and make a raw cd image:
Code:
dd if=/dev/cdrom of=~/cdrom_image.iso
ive done that successfully (making sure the drive is unmounted), but i cant even find the file now. ive searched the filesystem, but it doesnt appear anywhere.
I have been following the Xen Beginners Guide here: [URL] .....
Everything was going smoothly until I got to the 'Configuring xen-tools and building our guest' section (two thirds down the page).
I installed xen-tools and then typed the following in a terminal window (as root):
xen-create-image --hostname=development-pv-guest --memory=2048mb --vcpus=2 --lvm=develop --dhcp --pygrub --dist=jessie
I admit PV is new to me, compared to simple HVM, so I have a number of questions:
1. Why the command not found error?
2. Should I be booting from the Xen option or regular boot option at the start up screen when creating the xen image? I've tried both and get the same error message.
3. I have Debian 8 (Jessie) installed on my system and I wasn't sure whether I should therefore make this the guest OS in my Xen PV. In asking this question I'm thinking in terms of HVMs - but I assume my Xen PV needs a guest OS of some kind? Or is my host Debian 8 already acting as a guest OS in Xen PV? I'm confused
4. If I do need to install a guest OS, is it better to go for an earlier version of debian - so as not to be so resource hungry?
I'm nervous about screwing up my host debian installation, so when I got the error message, did some research but found nothing meaningful. I don't want to end up having to reinstall my Debian 8 (base OS) ... again!
I am new to Linux and I am trying to convert image files to mpeg video I tried using this command images2mpg -o Vorticity.mpeg -i Vorticity-Magnitude0%d.jpeg I get an error as below bash: images2mpg: command not found
View 2 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
I used kernel 2.6.5 in vmware I copied new kernel 2.6.37 image and initrd from other machine,to replace the current one after reboot,the initrd.img can be loaded,but soon it report "/dev/sda1 not found, waiting for I need to do anything in initrd.img to make it recognize "/dev/sda1" device? /dev/sda1 is vmware scsi disk.
View 3 Replies View Relatedi want to image my pen drive using dd command. i tried
dd if=/media/disk of=/media/disk-1/images.img
where disk is my pen drive and disk-1 is my hard disk. I boot and run the pc using linux bootable cd
I have used to knoppix to grab an image off a pc to my external hard drive.I then used the command dd if=/sdc1/backup.iso of sda2 bs=4096 conv=notrunc,noerror to another pc I was cloning.This process failed and the hard drive was not seen after that even using fstab.Is there any way I can verify if the iso image i grabbed is good.What command can i use to explore this iso image?
View 3 Replies View RelatedI have created an iso image from a RHEL5.4 disc using mkisofs.
mkisofs -A "Red Hat Linux 5.4" -V "Red Hat Linux 5.4" -v -U -J -R -T
-b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot
-boot-load-size 4 -boot-info-table -o /tmp/RHEL54-x86_64-dvd.iso .
It creates the iso image no problem, however when I go to boot a new server from the disc I get the boot prompt, hit enter, answer the language and keyboard questions and then it throws the following error:
"The Red Hat Enterprise Linux Server CD was not found in any of your CDROM drives. Please insert the Red Hat Enterprise Linux Server CD and press OK to retry".
Perhaps I need to specify in my mkisofs command that its supposed to be iso9660? This is on a RHEV virtual machine.
I am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.
make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....
I have created an image out of 2 other images using the "montage" command. I want to then print it using "lpr". I view the output from montage in XV and it looks fine however when I try to print, it prints the bottom half of the first image then the second and then the bottom half again.
E.g., imagine this:
Code:
<< end of top image
<< end of bottom image
The above is how it looks in xv however when printed, it looks like:
Code:
-------
-------
~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~
//////////////////
//////////////////
-------
-------
I really can't understand it, I've tried opening and saving the image again but it still prints as above. I don't know if montage is outputting it incorrectly or something, however it looks right on the screen!
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I have a simple script. When I run it as cron job. I jot email saying:/bin/sh: line 1: test.tmp: command not found.Even I took first line out, I got the same error.The current shell I have is /bin/tcsh.
View 4 Replies View RelatedI occurred a really weired problem, which is touch : command not found.I was going to create a blank file, so I type the touch command which didn't work.I'm running centOS 5.
BTW: the vi command also not found.
I am trying to build a Makefie, i am getting an error. /bin/sh: line 4: autoheader: command not found.
View 1 Replies View Relatedtell me what does error message signify and what should be done to rectify it...bash : lex :command not found
View 3 Replies View RelatedUsing fedora, when I try "ftp" I get command not found. I have tried "which ftp" and and get "no ftp in" then the bin dir's. I have tried the "locate ftp" but also can't see it: I see lftp, but never heard of it before, is this new and replaced ftp.
Code:
locate ftp
/etc/lftp.conf
/etc/selinux/targeted/modules/active/modules/ftp.pp
/etc/selinux/targeted/modules/active/modules/tftp.pp
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/ipv4/netfilter/nf_nat_ftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/ipv4/netfilter/nf_nat_tftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/netfilter/nf_conntrack_ftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/netfilter/nf_conntrack_tftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/netfilter/ipvs/ip_vs_ftp.ko
/lib/security/pam_ftp.so .....
I added $PATH=/usr/local/mysql to .bashrc_profile and I guess I wrote it in the wrong place...now when I log in my fedora the terminal says:
-bash: dircolors: command not found
-bash: cut: command not found
-bash: cut: command not found
[code]....
I want to run java -jar command and I have the following :command not foundWhat I need to do?
View 13 Replies View RelatedThe tgrep commands not working in my terminal at the moment and I was told by someone the following."It's not a standard command. I suspect the source needs to be recompiled for the current platform. Can you find the source files and compile them in your home dir?" I can't get into touch with that someone at the moment so could anyone explain what exactly that means and how I get tgrep working.
View 7 Replies View Relatedwhen i see /usr/bin there is no useradd command. and i want to add a user.if i type the command it is shooting an error saying command nt found .how should i create a user.
View 3 Replies View RelatedI am Using Fedora 13 on My acer aspire laptop. I want to connect to internet through my bluetooth Mobile(Airtel) When I type wvdial at the command prompt, I recieve a message as "Command Not found". I even created a script with name wvdial.conf in /etc. Method to connect to internet through Mobile Bluetooth.
View 8 Replies View RelatedI did a yum install libxml2 then later had to do a yum remove libxml2
on my rhel5.5 machine. During the course I answered 'y' to one of the questions asked, which may have lead to the problem I'm about to describe - I don't know because I can't reproduce the problem at the moment.
After doing the 'yum remove libxml2', which seemed to complete successfully, I tried to do a 'yum search <some other package>' and a 'yum install <some other package>' - both commands failed. The error message I get is
[root@server etc]# yum search libxml2
bash: yum: command not found
[root@server etc]# which yum
/usr/bin/which: no yum in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/bin:/bin)
I'm afraid during the 'yum remove libxml2' I must have removed some essential system libraries and applications, including yum.
i was wondering if it is possible too use the DD command to make an image file of my blackberry 8330?i need it of the onboard memory and not the external memory card.
View 1 Replies View RelatedCannot create a group in RHEL5.
View 1 Replies View RelatedHP Mini 210Fedora 15 Latest updatesGnome 3.0.1In the terminal when I do the following:nm-connection-editorI get the following:command not foundWhere is the nm-connection-editor?
View 1 Replies View RelatedI have installed Jre in my CentOS by following instruction here InstallationBut the problem is each directory or file contains the "*" (asterisk) at the end offile name or directory even though i have fired following command chmod a+x or chmod +xso please tell me how can i execute the executable file because when i am trying to run "java" its showing me following error
View 1 Replies View RelatedI'm trying to recompile my linux kernel -2.6.32.5 version in Centos OS platform and when I type these commands:
Quote:
depmod 2.6.30.5-fogonacaixadagua
Quote:
mkinitrd -v /boot/initrd-2.6.30.5-fogonacaixadagua.img 2.6.30.5-fogonacaixadagua
This is the link of the Guide that I'm trying to follow:
Quote:
[URL]
is there any packages in order for me use depmod and mkinitrd?or download it using yum?
But I just downloaded cygwin to my xp machine. Tried my first experimental script and created it one level directly below where cygwin put me by default. The script, named show two says:
#!/bin/bash
echo $1
echo $2
But bash apparently can't find it. The name of the script is showtwo, but I also tried naming it showtwo.sh; no dice.
I am having redhat 5 linux machine running on my windwos x in vmware workstation. Today i was installing oracle software in redhat 5 after editing the bash profile for the oracle user i got the following messages
su - oracle
password:*****
-bash: [oracle: command not found
[code]....