General :: Vmware And Xen On Same Machine?
Apr 20, 2010Can I install Vmware Server 2.0 and Xen on the same Linux Machine?
View 1 Replies
ADVERTISEMENT
Software :: Importing A Vmware Virtual Machine File Vi Vmware Server 2.0.2?
Jul 27, 2011I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
Ubuntu :: Use VMWare's Converter To Convert A Physical Machine Into A Virtual Machine?
Jan 3, 2010I read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies View RelatedGeneral :: Configuring 2 Mail Servers On Different IPs But On Single Vmware Machine?
Sep 29, 2010I want to know the configuration steps for 2 mail servers on diferent IPs. But I want this setup on single vmware machine(debian).
View 3 Replies View RelatedGeneral :: Attempting To Get BackTrack 5 Running With A VMware Virtual Machine On Windows 7
Aug 23, 2011I'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
View 1 Replies View RelatedGeneral :: Automatically Run A Virtual Machine (made By Vmware In Fedora OS) At Startup In Fullscreen?
Sep 11, 2010I am an administrator of a student lab with 20 PCs. I was thinking of a way to protect those machines in the long run with the presence of some students with destructive behaviour. The most suitable solution to install a Linux OS and use virtual machines to load Microsoft OS. This way once the OS fails I can simply replace the VM with a clone that was previously made.
The point is that most students have no experience with Linux, that's why I need to load the Virtual machine automatically at login and in full-screen view so that The startup process ends up in Microsoft OS through the virtual machine (VMWare based) in Linux platform.
update : I'm using Fedora13 Linux distribution. I believe that part of launching the VM in full-screen is more difficult than automatically launching VMWare at startup. Is there some way I can tell VMWare to launch a particular virtual machine in full-screen when it starts on boot?
General :: Auto-mount Virtual Machine Locations When VMware Image Finishes Loading?
Jun 20, 2011I mount a few locations from a VMware virtual machine, but currently every time I start up VMware I need to re-mount the locations once the VMware image has started up fully, which gets tedious. I'd like to be able to mount them automatically when VMware is started.
I generally double-click the .VMX file (which is associated with VMware Player) to launch the virtual machine, but once it has finished loading I would need to run the mount commands manually or execute a bash script that does it.
Is there any way you can think of to have it done automatically? One way I can think of is to start my virtual machine by running a script that starts VMware player, sleeps for a minute or so, then runs the mount command - but setting the right sleep interval would be difficult because this varies a fair bit - and overall, it's a solution that's kinda icky and that I'd like to avoid if there's some better option.
CentOS 5 :: Install Vmware Server On 5.5 - Error "You May Not Power Virtual Machine In Virtual Machine"
May 27, 2010I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedUbuntu :: Installing Into VMware 7 WorkStation - Get .iso Into VM Machine?
Sep 17, 2010I had a good copy of ubuntu on a disk but i lost it in the move, lately i decided that i wanted 2 OS's on 1 machine windows vista/Ubuntu x32. I've already got VMware workstation 7, now the great feat i'm trying to accomplish is getting this .iso of Ubuntu into my VM machine, I've got Daemon tools lite and magic-iso and magic disk. But i'm not too sure which 1 to use.
View 7 Replies View RelatedRed Hat :: Copying Configuration From A Vmware Machine To A Real One?
Aug 21, 2010I'm doing a school project for my masters and ran out of time setting up the system. Unfortunately, I can't easily use the removable hard drive I had at school. The school does permit students to buy a portable hard drive and use VMware player to run virtual machines, at the student expense if they want to be able to work at home, vs the hard drive they provide as part of the tuition. I'm planning to borrow one for this.
If I can get the DNS server and DHCP server running with vmware, how easy would it be to either copy the conf files for dhcpd and bind from the portable drive to the removable drive (looks just like a regular SATA drive once it's in the machine) via a flash drive or e-mail? Alternately, move the configuration files for CUPS, SSH server, and NFS including the part about excluding Root for NFS and SSH to the virtual machine?
Which do you guys think would be easier? Also, could somebody list the files I'd need to move the configuration for Fedora 12 for the situation I described just to help me double check that I got everything? Assume everything else is what is preinstalled off the DVD for Fedora 12, although I did yum install all those services and when possible the system-config utils.
Software :: Install Vmware Product On System Machine?
Sep 29, 2010Can i install vmware product on a linux machine and which linux distribution fits best?
View 4 Replies View RelatedGeneral :: VMware Snapshot With VMware Tools Loses Network On Restart - Host XP - Guest Fedora
Oct 3, 2010I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
General :: Access The VMWare Console From Firefox Using The VMWare Plugin
Aug 5, 2010I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedFedora :: Install On Virtual Machine (VMWare ESXi) Environment?
Nov 18, 2009I want to install Linux on a virtual machine (VMWare ESXi). My PC runs W7 64-bit. Can I install the new 32-bit Fedora Linux in a VM environment?
View 10 Replies View RelatedOpenSUSE :: Vmware Server Cannot Connect Virtual Machine Console?
Jan 29, 2010Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.
I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.
So, somewhere there is something wrong between Firefox and VMware server.
CentOS 5 :: Installed VMware Server 2.02 On A 5.4 Machine - Connection Interrupted
Feb 9, 2010I just installed VMware server 2.02 on a CentOS 5.4 machine. I tried to run 'vmware': it starts via my web browser (firefox) with xdg-open. Then, firefox displays this:
Connection Interrupted
The connection to the server was reset while the page was loading. The network link was interrupted while negotiating a connection. try again.
CentOS 5 :: VMware Server 1 Error When Powering On Virtual Machine?
Aug 25, 2010I'm running CentOS 5.5 x64 and have just installed VMWare Server 1. I am able to create a new Virtual Machine, but when I go to power on the VM in order to install the OS (windows server 2003), either the host crashes/reboots (with "Run in Debugging Mode" turned on) or the VM simply does not start (with that Debugging box unchecked) and in the log there is an error along the lines of VMware Server unrecoverable error (vmx)
View 1 Replies View RelatedNetworking :: Easiest Way To Redirect External Traffic To VMWare Web Host On Same Machine?
Jul 14, 2009Have done a bit of Googling around this but got totally swamped so will try here. Basically we are running a CentOS server which hosts a number of virtual hosts under Apache. Recently I needed to set up a development environment for another site using Ubuntu and have this running and accessible on the LAN from a VMWare image. I'm using bridged networking so the VMWare machine has its own IP on the LAN subnet.
I've set up a DNS to point to the external IP of the physical host but can't figure out how to route traffic requested on this domain to the VMWare host. I've basically tried two approaches (configuring a proxy web server and reverse proxy in an httpd.conf file and mucking around with iptables forwarding rules but without success.
Ideally I'd like somesite.somewhere.com to point to the VMWare IP but I could live with a custom port on the end if thats whats required.
To throw further complication into the mix I need reliable communication between the VMWare machine and external mail relay servers in order to debug any issues with mail bouncebacks, embargos etc.
Any idea what's the easiest way to accomplish this?
Ubuntu Networking :: When Tried And Failed To Install Vmware Virtual Machine Now Have No Internet Connection At All?
Jul 6, 2010I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
Networking :: Isolating A VMware Virtual Machine From It's Host But Still Alowing Internet Access
Oct 31, 2009I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
Software :: VMware Virtual Machine With The RedHat9 Can Not Recognize Win7 Hard Drive
Jun 9, 2010VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies View RelatedSecurity :: Detect Viruses Inside The .vmdk - VMware - Virtual MAchine Disk Format - Image?
Feb 6, 2011I have set up a virtual machine under VMware Player 3.1.2 in Debian. Operating system of this virtual machine is a Windows Server 2003. I would like to periodically test this Windows Server 2003 installation for viruses. Obvious solution would be to install an AV software under this Windows Server 2003 installation. However, I was wondering, is this possible to use NOD32 for Linux or clamav in order to test this Windows Server 2003 installation for viruses? Is NOD32 for Linux able to detect viruses inside the .vmdk file?
View 1 Replies View RelatedGeneral :: Vmware Server 2.0.2 Installation On 12 - Making Sure Services For VMware Server Are Stopped
May 19, 2010I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
CentOS 5 Networking :: VMware Server 1.0.8 - Cannot "send" A PING To The Virtual Machine
Nov 14, 2009I have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies View RelatedGeneral :: Transfer Files On A Machine With Ftp / Sftp And Scp Disabled Onto A Remote Machine?
Nov 30, 2010How do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedGeneral :: How To Configure Serial Port Of Virtual Machine With Host Machine?
Jul 29, 2009I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedOpenSUSE :: Install Snow Leopard 10.6.6 VMware AMD Edition (which Downloaded) On VMware System?
Mar 17, 2011Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedDebian Installation :: Vmware Workstation 7.1.4 - Can't Complete Compile Modules Of Vmware
Jun 6, 2011I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
Ubuntu :: Open VMware Tools Aren't Detected By VMware Workstation
Jul 17, 2011I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
General :: Transform A File On 1st Machine With A Tool On 2nd Machine In One Line Over Ssh?
Jul 14, 2011I have some file tools on a mint machine that I would rather not install on my mac laptop. Mainly because of the vastness of apt-get and the low risk of installation failure. Anyway, every so often I have a file that I want to process in place using some remote tool. Both machines can ssh right in to each other so I was figuring there must be some script or tool out there that would allow me to type out something like remote [file] [tool & args] to send my file to the other machine, get it processed, then get it back.
View 4 Replies View Related
