I can select Ubuntu 10.10 OS from the grub menu, but it no longer loads? It scrolls through some lines, including mount failure and "No such file or directory." before halting below :
(initramfs)
The same happens when recovery is selected.
I'd like to mount the directory /var/www/mysite to the directory /home/daniel/mysite, but also have the user of the mounted files mapped from the original user (www-data) to my own user (daniel). So that the file /var/www/mysite/index.php who's user is www-data will appear in the mounted directory as /home/daniel/mysite/index.php and be owned by daniel - and alternatively, if I create a file /home/daniel/mysite/test.php with my own user, it will be created in the original directory under the user www-data Is it possible? If not, what alternatives do I have so I can use an IDE and still make sure all the files belong to the HTTP server's user?
View 2 Replies View Related/etc/exports
Code:
/home/bludiescript/tv-shows 192.168.1.127(ro) 192.168.1.38(ro)
/home/bludiescript/shares 192.168.1.127(rw) 192.168.1.38(rw)
portmap
[code].....
ive been trying to setup nfs share across my network. i have 3 boxes one mac which uses samba to share to the 2 sabayon linux boxes which does work. however the 2 linux boxes cant share with each other or the mac. i have tried differnt variants of the export file such as 192.168.0.0/8, 192.168.1.0/24, *, sasquatcheian etc... after any change i execute etc/init.d/nfs and exportfs -ra, i have rebooted both computers several times. i setup reserved ip's on my routers lan setup page for each computer. 192.168.1.32 is my server 192.168.1.127 is my client along with 192.168.1.38 the mac.i disabled the firewall on the server and the client has no firewall.
I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
i had mount iso file to directory.now i want to install this program.how to do that?the file is Fedora-14-x86_64-Live-Design.iso
View 1 Replies View RelatedUbuntu(10.04) was working fine, then some program crashed or something, and I just switched off (power offed) the computer. When I restarted it, this sort of stuff comes:
Code:
mount /dev on /root/dev failed : No such file or directory
and some more lines like that, and then 'Busybox' starts with [intramfs].I booted Ubuntu from a pen drive and ran fsck on the main partition. I just pressed 'y' for a long time (it asks stuff like should it continue repairing or something), and then it was done. I restarted the pc and it booted normally - it looked as if everything was fine.I started google chrome, and it said it couldn't find a personal config file .. ok. Then I tried opening a folder - nothing happens. The system monitor doesn't open, and windows that do open eventually are completely blank. I restarted the pc (this time by doing the normal restart), and it gave me the same 'Busybox' thing.I did the same procedure again, and got the same results. (ubuntu boots, programs dont work, then I restart and the Busybox thing comes again)One More Thing : The Ubuntu installed on the hard disk had all the recent updates (including the latest linux kernel) while the pen drive thing was around 2 months old I think. So maybe that's the cause?
How can i auto mount more than directory in the same directory ? i want to automount 2 home directories in the /home and still be able to enter the other home directories !
The problem that i've another account on the system with home directory joe when the user1 home directory auto mounted i become unable to enter joe home directory !
I am trying to install 11.2 on a Dell Poweredge 2550 - two processors,all scsi, raid disabled, ATI grahpics. Fails at "failure to mount clich file system" - reboot.
View 9 Replies View Relatedsince running update manager on my daughters net running 10.04 netbook on boot up I get the following on the screen
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn�t have /sbin/init.
[code]....
Doesn't seem to matter which version, every time I try to install Software raid on an Ubuntu server system, it blows up with this error. Seems I've had trouble for several versions.
Code:
mount: mounting /dev/disk/by-uuid/f35415ee-4c14-4eb1-995f-f19fbcd760c7 on /root
failed: Invalid argument
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
[code]...
I've done it on Centos Fine, and followed the many different instructions I've seen for Ubuntu. The only luck I've had was with bios raid, but I would much rather let Mdadm handle things.
My build:
ubuntu-10.04.2-server-amd64 CD install
AMD 1055T 6Core
4GB ram
Asus M4A88TD-MUSB3
[code]...
I install both as letting Ubuntu decide partitions for one drive, do the same for the other, and create a raid, and do them from scratch. No dice, same problem. I've tried that one as logical and as primary too. No difference. Something just doesn't like booting from a raid 1 Mirror. I've tried installing grub on both HDDs (sda1 + sdb1)I've tried several CDs, burned from several machines. Re-downloaded from Torrent and from the website. The DVD drives work since I purchased new DVD drives for both one workstation and the server. Things install fine under CentOS, software raid comes up.
Okay, so on occasion when I boot into ubuntu I get this error
[mount: mounting /dev /root/dev failed: no such file or directory]
[mount: mounting /dev /root/sys failed: no such file or directory]
[mount: mounting /dev /root/proc failed: no such file or directory]
[code]...
I get the error when I open any of the kernel versions or any recovery mode. Ubuntu 10.10 Desktop is the only OS installed on the computer, which is a Lenovo S10-3. I can eventually get it to go away, sometimes by repeatedly unplugging it and plugging it back in, and sometimes I will boot into GParted, do nothing, then restart and it will work.I have found some solutions online, but all of them involve the error happening as a result of dual booting with Windows.I have made no major system changes recently, so I can't see anything like that being the problem.
I can not use nfs from F10 client to F12 server. nfs mount on F10 to F12 times out anf nfs4 mount gives "mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory" I have tried to close firewall and set selinux to permissive mode on both client and server with same result. Samba works fine. On server [root@flokipal ~]# mount -t nfs4 localhost:/home /media/tonlist mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory
but
[root@flokipal ~]# mount -t nfs localhost:/home /media/tonlist
[root@flokipal ~]#
works
This is the second time this has happened to me (after the first, i simply reinstalled but I would like to learn how to fix it). After a set of upgrades, when I restart, I get the following...
Killed
mount: mounting /dev on/root/dev failed: No such file or directory
mount: mounting /sys on/root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file ore directory Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. There are a string of numbers before this but I figure what I copied is the key material needed to find a solution. I am pretty new to Ubuntu, so I have no idea what to do from here. I have backed everything up through Ubuntu One so it isn't a huge deal to reinstall but if this is going to continue to happen
Recently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.
Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
View 14 Replies View RelatedI have a requirement that seems to be unique in nature. I have multiple clients who are caged to their home directories. I would like to "share" a directory which exists above these chroots with all these caged users. I know this can be accomplished using mounts but my problem is, how can I mount a single directory to multiple mount points located in each users home dir? Can this be done in the fstab file?
View 9 Replies View Relatedi've been getting into problems trying to move around my partitions, by copying them to a directory on a partitions with alot of extra space, then mounting then with --bind. i think it's todo with the permissions, like i can run gdm for the gui but i can't login.startx doesn't work though, gives me some errors but i don't know alot about x windows. but like the partitions are mounted, but just the system doesn't work properly with them this way?this is my method
Code:
rsync -aHPvx /usr/ /store/usr_proxy
then in fstab
Code:
/store/usr_proxy /usr ext3 bind,defaults 0 0
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
[code]....
write a script to ftp a file and get an email confirmation or failure sent out.
View 5 Replies View Related have a Debian server which I use to hold my home directory for my user account. I used to use Windows 7 and connect to my /home/username directory via Samba which worked great. I could access all of my files as if they were sitting on my local PC, but they were actually sitting on my Debian server.
Now I have decided to give Ubuntu 10.10 a try (looks promising so far!).One thing I'm not sure how to do is to mount my home directory from my server! I am able to open an sftp connection to my server, but not able to access them natively as they were /home/username on my local machine.I'm assuming I need to mount my home directory somewhere in my fstab before it starts up, but which protocol should I use? I'm used to using windows networking, but am trying to get more into linux.Should I use NFS?
I have a system with 2 hard drives. One drive (D) is my Ubuntu 10.04 system and the other drive (C) is my Windows XP system.
When I boot, I get BIOS then GRUB. If I choose the XP selection I am taken to a Boot Loader that now longer works. I get an error saying: "Windows could not start because the following file is missing. <windows root> system32hal.dll Please reinstall a copy of the above file.
Can I remove the boot loader and let Grub take me directly to the C:/windows? If so how?
I'm using Ubuntu 10.10 x86_64, with 2T HDD x5 grouped as RAID5 using RAID controller (dell perc 6/i), result in a 8TB disk, and I put it to a single partition in XFS. Just now one light bulb went wrong and caused whole house power fail, sadly during that time I'm copying some data to that partition. After I clear the power issue and turn on the computer, the partition still can mount, so I continue copying, and that gives me some IO error. I assume it is some kind of problem that need a file system check, so I unmount it, and run xfs_repair.
However xfs_repair shows the partition has not been unmount so I restarted the computer. After restarting, during the loading screen the system prompt me that it cannot find the file system, and I pressed 'S' to skip (btw 'M' for manually maintenance, but I didn't try) Then there comes the problem: the partition cannot be mounted anymore. I tried using palimpsest (the disk utility) to check, the partition shows normally (i.e., there's a 8T disk with a single partition in XFS), but when I try to mount it, the first time I click 'mount' results in nothing, repeat click will get an error 'The device is busy: A job is pending on /dev/sdb1'.
Checking the process running I found this:
process 'mount', status 'uninterruptible', command line 'mount /dev/sdb1', waiting channel 'call_rwsem_down_write_failed'.
Also other operations with that partition does not work, such as xfs_repair or mount, will just halt (and the waiting channel is 'get_sb_bdev')
How can I allow normal users to mount a tmpfs under any subdirectory owned by them?
View 3 Replies View RelatedI have a directory on my server at /home/dave/www/images/site (ext3) which I want to mount directly to my Windows computer so that I can transfer data easily via command line tool. Is that something possible?
View 4 Replies View RelatedRecently installed some minor software, some games and Ubuntu Tweak, I am not sure if that's what caused this issue or not. I shutdown after the installations, then when I tried to start back up the small, white ubuntu logo appears just like it normally does, then it just goes to a black screen. I turned off the computer and restarted in (Recovery Mode). It goes about its thing then it says it is waiting for root file system, then after about 30 seconds it says "Gave up waiting for Root File System" how to fix this without reinstalling?
View 2 Replies View RelatedI am on Mint8. Discovered that the error message was caused by the program thinking that the true date was 10 days ahead of the date that shows on the display. And the incorrect date goes right along, changing every 24 hrs, the true date never catching up. Short term solution was to set the date 1 yr ahead which then showed on the display. Long term (?) solution fsck eventually worked. We shall see how long.
View 1 Replies View RelatedCan't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
I'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
/usr/lib/libgtk-x11-2.0.so.0
I was doing a tutorial on scripting in bash. I saved my file on the desktop and I cannot seem to get to that file to execute it. Here is what I have been using:
I try cd Desktop says that there is no such directory.
I tried /home/me/Desktop same thing.