I'm writing and correcting API documentation in Sphinx using reStructuredText. Does anyone know of a good spellchecker that will handle this format, or a bunch of Unix/Linux tools that will allow me to use Aspell with it?
View 1 RepliesI can use spell check for English with vim, it works quite fine. But I don't succeed in doing it in another language. For example German spell checking: The command :mkspell ~/.vim/spell/de /usr/share/hunspell/de_DE.aff generates a de.utf-8.spl in the right folder, but vim marks every word as wrong when I activate it with
:setlocal spell spelllang=de
Please help me with this anoying spell check "helper".I've installed openSUSE 11.3 and KDE 4 and updated the latest patches.When I start firefox and thunderbird a spell checker activates which is active in all windows (including shell). I have removed all spell checkers (aspell, ispell, hunspell) then rebooted and the spell checker was gone. But now I wasn't able to start firefox and thunderbird because they seem to use it. I have installed again hunspell. The "helping" spell checker was there again :-))In the spell checking section of kde system settings I'm not able to find an option to disable this "helper".
View 9 Replies View RelatedIs there any spell checking functionality in the Squeeze version of the Arora browser?
View 1 Replies View RelatedI am translating some po-files and I would like to run a spell checker over them. I have Ubuntu 10.10 and use gtranslator. As far as I know, gtranslator can't spellcheck the whole file.
I tried ispell: $ ispell lordsawar-0.2.0-pre4.de.po - this doesn't work, as English and German strings, as well as some programming-relevant comments appear in the .po-file.
Do you know any program running on Ubuntu which can spell check po-files?
My ubuntu (lubuntu) installation came with abiword, which I like, but I can't get the spell checker to work.
I've tried various suggestions from Google but am floundering.
Sometimes at startup I get this message "Checking disk 1 of 1". Does that mean it's checking all partitions on the hd? After a bad shutdown there is no prompt for fsck to run and the system just boots up. In fstab I have both options set to "1" for the partition Ubuntu is on, all others set to "0". Any ideas on both?
View 3 Replies View RelatedI chose Mint 8 Fluxbox and have the iso. I cannot figure out how to check the iso for errors and the MD5 signature.I'm using Windohs XP so I tried to install MD5sum.exe. When I double click on it to run it all it does is flash and then nothing.When I type in the commands it says it can't find it or it can't read it or something.I may be typing the commands incorrectly. I'm just not understanding.I need to check the iso for errors but can't understand how to check it.
View 5 Replies View RelatedI'm trying to determine if IE is viewing my web page with the following HTML code:
Code:
But I don't see anything except "Test for IE". It is like the tests are being treated as comments? Do I need to turn something on in the server?
I run Ubuntu 9.04 and was recently told by my university that my computer is massively port scanning the network. I am interesting in learning more about figuring out what is happening to stop it, but I am lost at where to begin. What steps should I take (or files to look at) to figure out what is happening?
View 3 Replies View RelatedI am using Red hat on my laptop and normally playing in the console. As I only plug in the battery supply when the battery is down and going form console to GUI just to check the battery status is quite cumbersome , So was wondering if the status can be checked form the console itself.
View 5 Replies View RelatedCan I have parity checking without a raid? I would like to have parity checking but I want to maintain separate and independent drives so that if one day I decide I want to bring one of my drives to Bob's house I can do so. I Do understand that when I bring the drive to Bob's house it would at that point mess up the parity checking.
View 5 Replies View RelatedI need to check the file name e.g. testbla_word.txt
Is theire a command to search for only "bla_"?
So mainly, to check a part of a filename (not the entire filename, only a part of it)
I am logged in as root to my server and trying to get to the mail of a particular user (not root). I have created a mailbox in the 'prohosters' interface (a bit like cpanel) for johnny@john.com (under linux user: 'j0hn' I think) but when running the 'mail' command from the command line only seem to get mail for the root user ... ?I'd like to get any new emails as well for johnny and output their contents -
View 1 Replies View RelatedI am trying to load a driver (xxx.ko) and uncertain if the path given is correct.
I do not have any direct access to my linux device, so I need a small script that will create a text file telling me if the file was found or not.
The free Windows application Speccy returns very useful information about the hardware + software installed on a computer. Before installing Linux as double-boot, I was wondering if there were an up-to-date Linux hardware database so that I could tell users to run Speccy, and then somehow check against that database to make sure their hardware is supported, so that I don't waste time trying to install Linux on unsupported hardware?
View 8 Replies View Relatedhow can i check from console where folders are mounted?
i want to be able to check what partitions certain folders are on.
now i have installed libqt3-mt-dev this error is solve but new error is comming this is followingly i didn't understand------------->checking for KDE... configure: error:in the prefix, you've chosen, are no KDE headers installed. This will fail.So, check this please and use another prefix!
View 8 Replies View Relatedchecking of services in Nagios. You all know the check_[service] command right? In the commands.cfg and windows.cfg. To check for the different types of services/ports, we just replace the [service] in check_[service] with the name of the port? I only know of check_http, check_ssh, check_ftp etc. Some ports like Finger, snmp etc, all these we also write it as 'check_finger', 'check_snmp'? 2) And, if that is the case, do we have to install additional plugins to monitor the ports defined earlier? 3) Lastly, if i want to monitor finger,snmp in windows server, would i need to download any software?
View 2 Replies View RelatedI used to have a spell check every where I typed in Ubuntu and Fedora. I just noticed it's not happening on openSUSE. How do I enable it?
View 1 Replies View RelatedCode:
Thunderbird could not install the file at
file:///home/rodney/Downloads/spell-en-AU.xpi
because: Install script not found -204
I get this message when I try to install a spell checker in Thunderbird.
Also when I click on any links in Thunderbird nothing happens.
Just a little thing to make my Lynx Lucid installation perfect
I find it annoying when using Aspell in Evolution to have to check through the whole text before I arrive on the word that I need to check. Of course Aspell goes through all the headers in the email etc.
Is there any other alternative, or way of setting up the spelling preferences to make it possible to highlight a word and check it directly (like for instance Thunderbird does on other not to be mentioned systems)?
Looking for a command line tool for Windows / linux environment that can check a PDF file for any errors (not for repairing).
View 3 Replies View RelatedI need to know which files were added/modified/moved/deleted after compiling and installing an application from source code, ie. the command-line, Linux equivalent to the venerale InCtrl5.
Is there a utility that does this, or a set of commands that I could run and would show me the changes?
The following is sort of OK, although it includes the lines where changes occured
(eg. "@@ -2,6 +2,7 @@"), and "." and ".." that I don't need: Code: # ls -aR /tmp > b4.txt
# touch /tmp/test.txt
# ls -aR /tmp > after.txt
# diff -u b4.txt after.txt
Kernel 2.6.21.5, slackware 12.0
(Mozilla) Firefox 2.0.0.4
where the option to disable spelling checking is in FF? I think Edit>Preferences contains all of the settable options.
I need to know which files were added/modified/moved/deleted after compiling and installing an application from source code, ie. the command-line, Linux equivalent to the venerale InCtrl5.Is there a utility that does this, or a set of commands that I could run and would show me the changes?
View 2 Replies View RelatedI have one file called test.sh and in that file I have the below code. All this code is, is paths to three directories (as you can you can clearly see!).
Code:
#!/bin/bash
BACKUP="Documents /bin /sbin"
Now I have this other file which reads the directories (by using $BACKUP) and creates a tar file of everything in that folder. But what I am unsure of what to is create a bit of code that will simply look in test.sh, read all the directories and print a line saying either they all exist or some are missing. If possible it would be good to know which directories are missing too!
I have fiddled around with using -d but I can only get it to work for one directory or manually having to write out each directory.
I have installed thunderbird sometime back on Ubuntu.I want to know the date and time of installation. How can i get this information. I tried "stat thunderbird", but it did not give the installation time
View 6 Replies View RelatedI'm new to C language and some help finding places in the following code where a system call is made and error checking is not done. I found one but since I don't know C language at all I'm not exactly sure what else to look for. Link to my file: [URL]...
I found one and added error checking:
if (setoutpipe){
//Changes: Added error checking to the system call close()
//Orginal Code: close(pidefd[1]);
if(close(pipefd[1] != 0){
fprintf(stderr, "Could not close piple.
");
exit(255);
}
i have just started working on LINUX. how to check if there are some bad scripts running on the server.
View 3 Replies View Related