I am trying to load a driver (xxx.ko) and uncertain if the path given is correct.
I do not have any direct access to my linux device, so I need a small script that will create a text file telling me if the file was found or not.
I use this command:
Code:
find ./ -atime +360
to figure out the files that haven't been accessed since 360 days. The command above will return results like this:
Code:
/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Code:
mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext
But I want the executed command to create this path
Code:
/old-files/uploads/2010/02/
If it doesn't exist.
I try to install some scientific software from source and get the following warning, when I run ./configure:
...
checking for javah in user's PATH... not found
checking for javah in known locations... not found
configure: WARNING: Invalid JNI include dir, exit!
[code]....
I need to check the file name e.g. testbla_word.txt
Is theire a command to search for only "bla_"?
So mainly, to check a part of a filename (not the entire filename, only a part of it)
I had a situation in which the the path of the file to be copied is written in other file and I had to copy it using shell script..I can use cp $(cat /home/robert/location.txt) /media/sda1 on normal linux shell...But I am using buildroot script where $(cat /home/robert/location.txt) evaluate to nothing..is just blank..
View 1 Replies View RelatedI have an output file that looks like this:
Quote:
Now if you see the first line:
Status for ACCOUNT_MISSING_FRM_RCIS_LINK- mismatch
Status for ACCOUNT_MISSING_FRM_RCIS_LINK is ACCOUNT_MISSING_FRM_RCIS_LINK- does not exist in DB
This should appear just once as :
Quote:
The same goes for last line.
For further information the ACCOUNT_MISSING_FRM_RCIS_LINK is a table name and it row count is taken from a log and then Database checked for the rowcount to see if it is a match,mismatch,or the table does not exist!
I am getting the desird output just that i need to do something to this output file.
I have a Rad Hat 7.0 old Linux system that crashed due to power failure. On reboot the system goes to Checking Root File System and does 92.5% check and fails.
Here are the error messages I get.
I don't know what to do at this point so I say yes and it goes in some wierd mode.
SO I ran fsck manually but I get an error PARALLEIZING FSCK.
I can't fix the corrupted stuff for the system to reboot. THIS IS VITAL.
I have file which consists of many files with their path,i need to check for the file exists in the given path,how to check?
View 12 Replies View RelatedDoes executable file contains the precise path to SO file? Should it be compiled with precise knowing of SO file location?
View 8 Replies View RelatedI found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
i can download but i cant run anything because there is no ar file path for ark. please dont tell me to download something to get the ar file path because if i download it i can't open it
View 1 Replies View RelatedUsually in Gnome, under Ubuntu, the terminal command I use is:
Code:
gnome-open (path)
In most cases, I won't know the path and I'd rather not search for it with:
Code:
locate (file name)
what is the file and path name of the configuration file to which you would add to the AllowUsers charlie linus lucy?
View 3 Replies View RelatedKernel 2.6.21.5, slackware 12.0 For a given app run by me as user john to be able to create a file in /foo1/foo2/, what do I need? (a) john to have write permissions in /foo1/? (b) john to have write permissions in /foo1/foo2/? (c) john to have write permissions in both /foo1/ and /foo1/foo2/? Any hint will be welcome. Note: No. It's not homework. KTorrent complains when trying to create the files being downloaded, saying 'permission denied'. But I think he is being run by another user. I can explain in a different thread.
View 3 Replies View RelatedI want to assign the path of a sourced sub.bashrc file to an environment variable. E.g. if I type (or execute) from a known relative location
$ source ../../someDir/sub.bashrc
the sub.bashrc should set a variable like
export MyOwnLocation=/home/user1/unknownlocation/someDir
The problem is I can't use $0 as reference because the script is only sourced not executed. I also don't want to hardcode the path because the location might change and there will be more copies. Is there an easy way to create this information from within the the sourced bashrc file? I use Gnu bash 2.05b on Suse Linux 9.
I have installed a software and set the variables in the .bashrc file to avoid setting them everytime I would like to run te software. Now I have installed a new software and would like to do the same thing in the .bashrc file.How can I add the path to the new software directory without affecting the first software path.
View 2 Replies View RelatedI'm using my Linux (SLES 10) server as a File Server at this point. I need to set File Permissions to nested folders differently to different groups. For example:
homesharedengineering* should be read only for groupA
homesharedengineeringadmin should be read & write for groupB Plus read only for groupA
homesharedengineeringautocad should be read & write for groupC Plus read only for groupA
I've been using Webmin and Putty to set permissions but Putty only allows me the Default Group, it won't allow me to set several groups on the same directory. Webmin seems to allow me to add multiple groups (Webmin --> Others --> File Manager --> Info & ACL tab will provide extended abilities) but when I add multiple groups, they don't seem to take effect? I'm wondering if my setup at the 'Share' level or at the hierarchy of my folder structure (unix based) needs to be set specifically?
I am unable to create either a file or a directory in a specified path in Linux.
I am getting the error "No space left on device".
I have checked with df -k and df -i. Free disk space is 28 % and free inodes are 28 %.
What else could be the reason?
I am reading about jiffies in linux kernel. In one of the related example in the book Linux Device Driver, the author use
head -8 /proc/currentime
to print out some time information.
However this file is not present in my linux installation (kernel: 2.6.32-131.6.1.el6.x86_64). Why is it the case? Is it because the file path is no longer valid, or it is a distribution feature thing? It is not present in OSX too. What would be an equivalent in OSX?
I am total new to linux as I worked mostly on RTOS (symbian). My problem is, I need to find the file IOSTREAM.H and I am following commands below:
1) cd /
2) find . iostream.h ( finds the file / directory from the current path)
It shows No such File or Directory
trying to write my thesis in Lyx 1.6. It works fine on my windows laptop at home but Not on my work computer. The problem is, when i try to view it in pdflatex it comes with with: Lyx: file name error The directory path to the document cannot contain spaces
View 1 Replies View RelatedI need to replace a string in a file(startup.sh) using a script(parser.sh). After running parser.sh startup.sh should be filled with nfs path like /home/vimal etc but im getting error since path contains /. how to remove this.
View 3 Replies View RelatedI have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
View 3 Replies View RelatedI have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies View RelatedCurrent script:-
prefix=user@my-server:
find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
How can i write a shell script that takes a file path as command-line arguments.and it should report whether the path denotes a file or a directory.
View 2 Replies View Relatedusing Ubuntu file browser, I browsed my Windows network and logged on to a Windows PC. Now Ubuntu file browser shows me "C$ on WinPC" as a folder. I can open it, read/write files, etc.But from bash prompt, I don't see anything of type CIFS/SMBFS listed in the output of "mount". Only the usual suspects (like local CDROM). How can refer to Windows files from Linux commandline?
View 6 Replies View RelatedI don't think there is a way of doing this with date or clock commands. But maybe they are writing to some file and I can take a look at the file's modification time. dmesg and /var/log/messages show nothing relevant.
View 1 Replies View RelatedI have asked this over on Launchpad and have found bugs filed on the eclipse bug tracker but it seems to be going nowhere so I guess ill ask here.
I am using Eclipse for some development work and having saved a file, defocus the eclipse window (to test changes in a browser) when I refocus the eclipse window I get the following error...
The file 'path omyfile' has been changed on the file system.Do you want to replace the editor contents with these changes?
I have searched and searched and this seems to be a CIFS/SAMBA problem. I even found one solution suggesting that changing his mounts from cifs to smbfs fixed his problem however that would appear not to be an option for me since using smbfs in the fstab causes cifs mounts. This problem would seem to occur in Bluefish as well as some other IDE's so it is not an Eclipse issue.
---------- LINKS TO RELATED ----------
Launchpad Question
Eclipse Bug
--------------------------------------