General :: Search For Text Strings
May 19, 2011What would be the best way to search for a file that contains a string similar to this:
View 1 RepliesWhat would be the best way to search for a file that contains a string similar to this:
View 1 RepliesLong story short, I got a folder with nearly 800,000 php files. I would like to search each file for a string and if it exists in that file, the file gets copied to another directory. Is this possible from the terminal? So far I got: grep -i -n -r 'ppr-1792' * | cp $1 move_to_here
But this obviously doesn't work. $1 needs to be the file name that contains matching text.
Something very handy to do in a Linux shell, is manipulating files and strings - essentially parsing data. Write a utility which will scan in a text file and search and replace strings. We also want to keep track of how many strings we've replaced.
I know that my command would look like this: <utility name> <filename> <stringToSearchFor> <stringToReplaceWith>
Code: #!/bin/bash
[code]....
This should be simple but I can't seem to find what I am looking for.I want to search a text file for the existence of certain strings and execute a command if they exist, something along the lines of:
if <string> exists
command
or
if <any member of this list exists>
command
I know how to manually search a file with grep, cat, etc., but the "if this exists" part eludes me.
I am using sed to process an ascii tcpdump file whereby each packet is processed into a line with the same number of columns and useful information is pulled out like the time, packet type, length, and also IP addresses, payload type and port numbers where appropriate. The time is already changed to seconds, followed by the protocol over ethernet, such as IP, IP6, ARP etc. and I can change anything it detects as IP, IP6 and ARP into some other string, pulling out necessary information depending on the protocol and payload.The beginning part of the search for IP starts with the sed search /([0-9][0-9]*.[0-9][0-9]*)[ ]IP[ ,] ... /, where time is in seconds and ellipses means more stuff, and likewise for IP6 and ARP.But how do I process the lines that are NOT IP, IP6 or ARP? (Specifically NOT /IP[ ,]/, /IP6[ ,]/ or /ARP[ ,]/.) So that I can format them into a string with the same number of columns.
View 2 Replies View RelatedIs there a faster way to search for a file containing a given string than using grep -re "string" /
This takes a long time to search through the entire system, so I was wondering if there is a faster way. I don't know the name of the file, just that it will contain a given string.
I got requirement to find the difference between two strings and write the difference to new file by comparing the substrings separted by commas
Below mentioned is an example of requirement
String1 --> ABC,DEF,GHI,JKL
String2 --> MNO,ABC,XYZ,DEF
In String1 and String2 the substrings are separted by commas. The substrings which are common between String1 and String2 are ABC,DEF this common substrings has to be written to a file say common.txt ( having the text ABC,DEF). And the substrings GHI,JKL in String1 which are not present in String2 has to be written to another file say String1Extra.txt (having the text GHI,JKL). In the same way the substrings MNO,XYZ from String2 which are not present in String1 has to be written to another file say String2Extras.txt(having the text MNO,XYZ) .
Currently, when I'm searching text in files of my PHP project, I use this line :
Code:
grep -r 'myTextToFind' *
But now, I would like to search only in ".lang" files. How can I do that ?
Trying to remove lines from a syslog text file that have duplicate strings
Mar 10 06:51:11[http-8080-1] INFO com.MYCOMPANY.webservices.userservice.web.UserServiceController [u:2533274802474744|360] Authorize [platformI$tformIdAndOs=2533274802474744|360, userRegion=America|360]
then a few lines down
Mar 10 06:52:03 [http-8080-1] INFO com.MYCOMPANY.webservices.userservice.web.UserServiceController [u:2533274802474744|360] Authorize [platformI$tformIdAndOs=2533274802474744|360, userRegion=America|360
got the same thing in terms of a u: number but the issue is I need to remove duplicates and just leave one and the file has multiple duplicates of different u: numbers and it's 14,000 lines long. can anyone tell me if I can use awk? sed? or sort for something like this to? removing lines that have a certain string in there that's a duplicate.
How can i use different starting and ending delimiters in awk to search for strings or numbers like:
:string"another_string
'number+another_number
now i want string and number as output from above lines. But if i use delimiter as : or ' it will print the entire line coz second delimiter is not same as first one.
I want to search and replace strings in a file with strings in other files/i need to do it with big strings(string1 is big) and i want to use a txt file for this.But this code not working :
View 14 Replies View RelatedI have used diff command in past.I faced a situation to which I did not had a cluehere are some text strings (which can be stored in a file)Quote:
CONFIG_XEN=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
[code]...
I need to search for a string "teststring" in all *.java files coming under /home/user1/ (including subfolders). How can I do it in linux via shell command.
View 5 Replies View RelatedI have a html page and I would like to search for the occurance of a given string as an anchor. Then I would like to search backward for a the first match to a given regular expression. As a result I would like to output the text between the two points.
Please note that I would like to have the output up to the first regex match before the ANCHOR point.What is the best tool to solve this?
I have done a bunch of searches on this but the terms seem to get tangled in the more popular search of "colouring the output of grep / awk". I am trying to find a way to grep/awk through the output of a command to find text of a specific colour. The command's output has a range of colours signifying too many different things to specify using text, with colour being the only form of grouping.
View 5 Replies View Relatedhow to search in files text that is one-byte encoding? places - search for files in gnome in ubuntu searches only utf-8 text.i know one way: install wine and total commander, then search with it. what are better ways?[URL]
View 4 Replies View RelatedI have a file called Regions.ini that looks like this:
Code:
[Granite]
RegionUUID = 54ab7cd2-0e70-49b7-8020-8dbeb84c08d0
Location = 9991,10007
InternalAddress = 0.0.0.0
InternalPort = 9001
AllowAlternatePorts = False
ExternalHostName = 71.171.21.9
[Syenite]
RegionUUID = 8fc56fdd-0afd-4074-9432-0ae8f42b799f
Location = 9992,10007
InternalAddress = 0.0.0.0
InternalPort = 9000
AllowAlternatePorts = False
ExternalHostName = 71.171.21.9
What I need to do is find out what the IP address is after "ExternalHostName ="
After that I will need to compare that IP to whatismyip and if it's different then replace it but that is easy to do with sed. I just can't figure this simple hurdle out.
I've got a big text file in which I know have probably made some typos (LaTeX). Sometimes I rewrite sentences several times and then end up with double pieces like "the the" or "is is" without noticing it. Most spell checkers that I can use in LaTeX are very basic so they do not notice these grammar errors. Is there a way that I can search for these repetitions by hand using sed or awk or something along these lines? Is there an app for that?
View 3 Replies View RelatedHow do I recursively generate a text file which has a list of all files on my server which contain a specific string anywhere in the files?
I know the following command can be used to replace a string recursively
find /var/www -type f -print0 | xargs -0 sed -i 's/old string/new string/g'
I do not want to replace the string, I just want a list of all files which contain the string.
I am using find some_dir -name "*.some_ext" | xargs -l10 grep "some_expr"
to find files in folder, but I just want to display the file name but not all file content. Any solution?
Suppose I have a pair of files containing lists. The first file is called contigs.txt and it contains a list that looks like this:
Code:
Contig822
Contig826
[code]...
I need to search a text file for a string of numbers which are different lengths, and always are between number=" and " like:
number="1234567890"
number="22390"
I need to grab those numbers and pipe each one to a line in a file. I've already tried something with awk and that didn't seem to work.
I'd like to search the entire server by content. (text file) When I try grep -rl "text here", it freezes. How would you do it? And how long does it usually take?
View 4 Replies View RelatedIm trying to read a file in c++ and search for particular character for example if this is a list that I have:
Alice
Bob
David
[code]....
if the input is D, it should give David, if its B, gives bob. so in this case, meaning it reads the first character of every line. but if possible I want to make this dynamic so the user can specify which character position he is looking for, so in case he is looking for R as character index 3 in all lines, it should give Charlie. but the problem is, it does now recognize , besides, I do not know how to specify the character position in each line.
here is my code
Code:
#include <iostream>
#include <fstream>
#include <cstring>
[code]....
i was wondering if in all the editors/tools in linux, if there was a prog that can extract a portion of a text file, giving it a starting line of say o as the first character on a line of say o35565 oxxxxx then when it finds the next line down the file with the same thing oxxxxwhatever
it could take those lines and all the lines between them and save it to another file? i dont know if you call this parsing? or what.
I wondered if there was a way in Fedora (I'm running 12) to rename Firefox search plugins as they appear in the search bar's dropdown list.
View 4 Replies View RelatedI have a hidden folder with a lot of text files in it. I would like to search in this folder for all files containing a given text.The File Browser's" FIND searches only in the file names, not in their contents.The FIND function of Ubuntu does not allow me to search ONLY in the given hidden folder. So, how can I find my files within the hidden folder with the given text within them?
View 7 Replies View RelatedI'm trying to search all .log files in ~/.irssi/irclogs/ and it's sub directories for the string 'irssi' and I had though the command I'd used for something similar before was.How should I edit the command, and is it possible to output every line found containing the string to file?
View 4 Replies View Relatedim tryin to make a tool in visual C++ which will take an input string through a text box,then it will compare tht string with a text file containing data and display the matched results in list box.
View 2 Replies View RelatedI am trying to construct a quick regex that will search for six lines of text without a clear line break between them. It only needs to search, not replace, as I will be using in gEdit (with regex plugin) anyway.
It's for editing subtitle files. The video player I will be using them on can only cope with 3-line subtitles, so I just need to edit any in the srt file that contain four or more. There won't be many so I can do it manually. For example:
26
00:01:47,357 --> 00:01:49,359
a motivated business
professional with
clearly defined goals.
[Code].....
but .* seems to mean "any character, or none", so that doesn't work. My experience of regular expressions is limited, but I do know they are very powerful when used correctly!