General :: Real Temperature From Amd K10 Cores
Apr 1, 2010
I am using the standalone k10temp temperature sensor but it doesn't give the actual temperature of the cpu, just some "bogus" temp value that isn't very useful.Does anyone know how you can calculate the real temperature from this reading?
View 3 Replies
ADVERTISEMENT
Apr 13, 2010
I have a notebook with AMD Athlon 64 QL-62 2 cores CPU. Normally the temperature is 50-52 Celsius in idle but with Ubuntu 10.04 beta 2 idle temp is 60 Celsius. /proc/cpuinfo shows both cores on 1GHz which is good but still temp is higher than usual. I tried to find solution using Google but I didn't find anything.
View 1 Replies
View Related
Jan 20, 2011
Interpreting the output of /etc/proc/cpuinfo.
This is a Linux Box.
Here is the output and I need to know how many CPUs we have and how many cores per CPU.
View 5 Replies
View Related
Jul 28, 2010
When I was using Virtual Box in Windows 7, I could choose how many CPU cores to assign to the guest OS. Now I'm using Linux, and when I installed Virtual Box, I couldn't find that option. System Monitor shows that when the VM is busy only one CPU core goes to 100% while the rest are near 0%. How can I make Virtual Box in Linux use multiple CPU cores?
View 2 Replies
View Related
Jul 26, 2011
Many commands in Mathematica 8 (Integrate, Simplify, etc.) seem to only be using a single core on my system. Is there any way I can change the affinity so that it utilizes all cores for computations?
View 3 Replies
View Related
Feb 17, 2011
I have a four-cores machine (core1,core2, core3, core4 ). I want to test the communication or latency between two cores (for example, core1 and core2; core3 and core4). Does anyone know how to write a code to test it under linux operating system?
View 1 Replies
View Related
Jan 24, 2011
I have a 8 core computer, which has 8 logical processor in total. I want to create 8 process(nodes). Each node is mapped to each logical processor. The order is code...
I wrote the code as below, could you please see whether it is correct? code...
View 3 Replies
View Related
Jan 17, 2011
I am new to the forum and new to Linux.
I am trying to explore if Linux can be run on a multicore platform when the max frequency of one the cores is less than the others.
please give me some pointers or let me know if you have tried such HW configuration.
View 1 Replies
View Related
Sep 2, 2011
There is a computer with two "Xeon(R) CPU X5550 @ 2.67GHz" CPU. The Hyper-threading is enabled, so it looks like 16-core system, but really there is only 8 physical cores.
I know that when hyperthreading is enabled, each physical core is splitted into two virtual cores. I want to know, which pair of virtual cores shares a physical core and which are not. Or, how (in what order) will Linux enumerate HT-cores comparing to real cores. (enumerating is done for sched_setaffinity and taskset masks).
I have a dump of /proc/cpuinfo file from the system.
I think there are possible:
CPU0-CPU7 are not sharing phys. core. CPU8-CPU15 too. But sharing is in pairs CPU0+CPU8, CPU(i)+CPU(i+8) and so on. or CPU0+CPU1 are from single physical, CPU2+CPU3, CPU(2*i)+CPU(2*i+1). or exotic CPU0+CPU15 sharing, CPU1+CPU14 ... or random?
The hard moment in this case is that there are 2 physical dies of CPU (two sockets), and usual recommendation of using "physical id:" field can't help
The cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU X5550 @ 2.67GHz
[Code].....
View 1 Replies
View Related
Mar 12, 2010
Trying to install Ubuntu from CD. I choose my language and hit Install and come to a black screen with the Ubuntu symbol glowing (loading everything I assume) and after a minute my screen fills up with messages saying my CPU Temperature is 99 (gets progressively higher) degrees. Is there something else I need to do before installing?
I have windows installed on my C drive and I'm planning on installing Linux on another blank drive. The Ubuntu version is the newest one (9.10) I think. I've got a Core i7, EVGA mobo, Nvidia 9600GT video card, and 6 gigs of memory. HDDs are all WD I believe, and the one I'm putting Linux on is 320 Gig.
View 14 Replies
View Related
May 8, 2010
I want to read the temperature of my cpu and fan speed using a c++ program and then plot it.
View 3 Replies
View Related
Jul 28, 2010
Currently my CPU temperature as measured by lm-sensors increases by 1-2 C upto 4-5 C when I start a new process - like a video, music, etc. The change takes place in less than a second. Is this normal or should the change be happening more slowly?
If it is indeed happening too rapidly, what could be the likely causes?
I'm running Ubuntu 10.04 with Core i5 430M.
Edit: I should add that these are temperatures from an HP laptop (dm4t).
View 1 Replies
View Related
Jun 25, 2011
It's from my /var/log/messages
Jun 25 12:27:19 nl kernel: CPU0: Temperature/speed normal
Jun 25 12:27:19 nl kernel: CPU4: Temperature/speed normal
Jun 25 12:27:19 nl kernel: CPU6: Temperature/speed normal
Jun 25 12:27:19 nl kernel: CPU2: Temperature/speed normal
Jun 25 12:27:19 nl kernel: CPU3: Temperature/speed normal
Jun 25 12:27:19 nl kernel: CPU7: Temperature/speed normal
[Code]...
I checked the temps with ln_sensors, KVM and DC temps, everything is running great. I didn't get any shutdown in the meantime. I basically need a way to disable those warnings but reboot is out of question, means no BIOS. Hope its possible to disable it from the console itself, with blacklistinh some kernel module(s) or something like that.
View 3 Replies
View Related
Jun 27, 2010
I have a Dell Precision M4500, Intel Core i5 CPU, running Linux (Ubuntu Lucid), and would like to keep an eye on CPU temperature. I've tried lm-sensors: sensors-detect didn't find any sensors; following its hint ("This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.") I tried acpi -V but got nothing thermal. The Gnome panel applet "Hardware Sensors Monitor" reports on GPU temperature but nothing else.
View 3 Replies
View Related
Jun 7, 2011
How to monitor hardware temperature (CPU , Motherboard , HDD etc) in CentOS/RHEL ?
View 3 Replies
View Related
Jan 18, 2011
I'm trying to monitor the temperature of my GPUs (multiple ATI 5970) in my computation cluster. Problem is that the aticonfig tool does not work in headless mode
# /usr/bin/aticonfig --od-gettemperature No protocol specified ERROR - X needs to be running to perform ATI Overdrive(TM) commands
and even worse if I try to run aticonfig with my monitoring user (munin) it will ask to be executed as root. Is there a simple way to read the temperature of the GPUs without having to resort to X?
View 1 Replies
View Related
Feb 13, 2010
I'm thinking of designing a software that may need to change the current user to a normal user if run as root. But from what i've read, you can still switch back to root if you were root in the first place (meaning, the real UID is 0). I'd like to make this impossible. I think the solution is forking but i'd like you to confirm this.
My question is, does the real UID of the children is the effective UID of the parent at the time the fork is done? My manual lists what's inherited from the parent but doesn't states this. I'd like an answer about Linux kernel and about Unices in general (i'd like to make it at least POSIX-portable)
View 2 Replies
View Related
Apr 10, 2011
about VIP (Virtual IP) and real IP address used for load balancing. How they work and how to configure real IP.
View 1 Replies
View Related
Jan 7, 2011
know of a way in Linux to have a virtual ethernet (e.g., eth0:1) appear as a "real" ethernet (eth1)? I ask because I have an old Shuttle box that only has one mobo ethernet and no way to add more. I'd like to use it in my Oracle RAC lab, but RAC requires two physical ethernets. You can't fool it with eth0 and eth0:1. RAC won't setup correctly if there's only one eth adapter, so I'm wondering if there is a way to fake two ethernets. I do not care about performance or reliability - it's my home lab. I fully realize that this violates every principle of HA, but I'm just using it to study. Worst case, I can get a USB dongle ethernet adapter, but I'd prefer to avoid the cost if possible.
View 3 Replies
View Related
Dec 7, 2009
I've got the following problem:
1. I start two bash windows
2. In one of them I start a script test1:
Code:
This script puts a natural number 5 times a second.
3. Then in the second bash window I type (as root):
Code:
The script test2 looks as follows:
Code:
While true; do
true;
done
During the following 15 seconds test2 is the process with the highest real-time priority. As far as I know the script doesn't perform any system calls so it shouldn't be suspended even for a minimal timeslice. My question is: why the process test1 manages to put a few numbers on the screen before test2 stops. I thought that test2 would exclusivly own the processor for 15 seconds.
View 8 Replies
View Related
May 21, 2010
i am using ubuntu 9.10 on a x386 machine, have libasound 2 installed & updated, cannot install realplayer 11 because is says Error: Dependency is not satisfiable: libasound2 (>> 1.0.22). likei said, libasound is installed & updated according to synaptics.
View 6 Replies
View Related
Jan 17, 2011
I have to write one Shell script where i have to find one word in current generated log.Log name has specific format like 'NAME_DDMMYY_HHMMSS'.log.Each time i have to go and check the word in newly generated log.How can i pass the newly generated log name in my Script?
View 2 Replies
View Related
Mar 23, 2010
what the recommended way to set up real-time (or near real-time) folder synchronization among 2+ servers. I looked a rsync but that doesn't sound real-time and it looks like its something that you might put in a cron once an hour.
View 1 Replies
View Related
Jan 14, 2010
JIt was easy to check in Windows, but I just wanted to know if there's a way to check if Ubuntu is utilizing both cores of my processor (Pentium Core 2 Duo).
View 9 Replies
View Related
Apr 22, 2011
I am attempting to Run Ubuntu 10.10 on a system with 128 CPU cores (64 dual core processors), but Ubuntu is only detecting 32 cores. I've looked and looked and cannot find any information on this topic; is there a core limitation in the kernel configuration that I missed? Currently I am using Ubuntu 10.10 Desktop, would I have more luck with 10.10 Server or another version?
View 9 Replies
View Related
Apr 13, 2011
Anybody knows How can I get the number of cores of a machine?I know that I can use POPEN and get the stream of this:
Code:
grep -i 'processor' /proc/cpuinfo | wc -l
But, I think that a simple method to do this.
View 10 Replies
View Related
Aug 12, 2011
Debian 6 ("Squeeze") uses a rebranded version of Firefox called Iceweasel. It however lacks plugin support, most of my favorites don't work.So what is best way to install the "real" Firefox on Debian?
View 2 Replies
View Related
Jan 25, 2010
i m new in linux.today i tried to install real player on my system using the following command,
yum install "path of the software"
but unable to install.how can i install easily.i m using redhat linux.
View 2 Replies
View Related
Dec 1, 2010
How can I search "$" in vim, which is not the end of line but the real char '$'.
View 1 Replies
View Related
Nov 2, 2009
I have a problem i.e; how to install real player in fedora linux 5.
View 1 Replies
View Related