When I was trying to configure PAM on a RHEL5 system, I put the following configure in /etc/pam.d/system-auth:
password requisite pam_cracklib.so minlen=15 try_first_pass retry=3 dcredit=-3
The option dcredit take effect, as a normal account I cannot enter a password that has less than 3 digits, but minlen=15 does not. I can still enter a password with the length about 12 characters.
I was messing around with changing the dictionary for our PAM cracklib module and seemed to have stuffed something up.When I attempt to log in through a telnet session with any user that has a password I getAuthentication FailureThis session is no longer connectedI am still able to log in via the Web admin using the root user/password.I can also log in from a telnet session if the user has no password.
View 6 Replies View RelatedI have a loadable module, simple enough I believe it should run on any 2.6 kernel. I want to force the load and test that assumption. How can I do it?
ismod does not seem to notice the -f in 2.7 modprobe has -f but cannot locate the module.No go. So I read the manpage for modprobe which says: modprobe looks in the module directory /lib/modules/'uname -r'.So I copied MYMODULE.ko to /lib/modules/2.6.(the only directory in here) and type: modprobe -f MYMODULE.ko.Still can't locate MYMODULE.ko.I notice there are no other .ko modules in that directory; so I go in deeper to kernel/drivers/char, guessing about the char directory, and copy MYMODULE.ko there.
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
Is that possible?That would be ideal scenario.
1-ServerB has id B.
2-workStationA use id B to login.
3-if any other ip other then workStationA tries to log to ServerB with id B, server B will drop the connection.
remains in 'readonly despite rwx in /dev/sda and does not accept to copy into it. mounted correctly.
View 3 Replies View Relatedi have to agree the term of agreement before runing it becase i want to automate my installation with a scripti have already tried "yes | ./myfile " but the problem is the agreement is more than one page and i need to hit space couple of times .. so it's not working .
View 7 Replies View RelatedI am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
I installed webmin, and I tried to access it with my account (not root, but able to sudo) and I always got login failed.Now I have Access Denied even to my login page for too many tries. What should I do?
View 1 Replies View RelatedI have a Redhat server that it is allowed rcp file from remote server, it is strange that after I modified the .rhosts, the server is no longer to accept rcp file , even I use other user to rcp files , the error is still "Permission denied", can advise what is wrong ? what daemon that I can try to restart ?
View 5 Replies View RelatedWhy does ping see audit.median.hu as 127.0.0.0, and why does host -t a audit.median.hu see it as 193.68.35.149? audit.median.hu is just an example site [hosts ads, etc.]
I just have a caching nameserver on my Fedora PC:
I configured my DNS server addresses in the Network-Manager Applet: 127.0.0.1, 8.8.8.8
Even with Wireshark, I can see it:
So the big question: Why don't the host command or my web browser recognize that I have modified audit.median.hus IP address?
I am using a ubuntu 10.10 desktop,i cannot login to my system it doesnt accept the password. when i login in safe mode i get through but when i run any command i get segmentation fault.
View 5 Replies View RelatedWhat is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedI am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
How do I format another drive to "accept" Linux and delete/erase Windows?
View 6 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View Relatedwhen I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies View RelatedI installed Maverick with auto login. One could undo this by reinstalling I suppose, but is there an easier way to get back to the standard form of login?Hopefully that will cause my default key ring to unlock correctly.
View 3 Replies View RelatedWe do use kickstart configuration file to customize the CentOS installation. In the partitioning screen, I do see a check box for encryption (encrypting the disk blocks).
I want to remove this checkbox in my kickstart configuration file. What is the option to use to get rid of this checkbox.
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?