General :: PuTTY And 256-color - Line Drawing Characters ?
May 3, 2011
I'm having trouble setting up PuTTY with Ubuntu. I'm trying to get line characters to work in aptitude as well as 256-color support, but can only get one or the other.
Ubuntu Config:
Using 64-bit Ubuntu
Terminal type xterm-256color or putty-256color gives 256-color, but incorrect line characters.
Terminal type linux gives proper lines in aptitude, but only 16 colors.
PuTTY Config:
Using font with Unicode characters. (DejaVu Sans Mono)
Received Data is assumed to be in UTF-8.
Set to use Unicode line drawing code points.
Output from locale:
View 1 Replies
ADVERTISEMENT
Sep 26, 2010
On my terminal only system ( no Xorg or guis ) I have a font rendering issue. In place of some symbols ( eg double-lines and some other miscellaneous line-drawing shapes) are generic diamonds. Attached is a fbgrab ( png format ) of elinks showing the problem. I have now configured elinks to only use single lines drawing characters ( which work fine ) for now as a work around. Here is my /etc/default/console-setup
Code:
# Change to "yes" and setupcon will explain what is being doing
VERBOSE_OUTPUT="no"
# Setup these consoles. Most people do not need to change this.
ACTIVE_CONSOLES="/dev/tty[1-6]"
[code]....
The numbers in the FONTFACE show the size of the font matrix. For example Lat2-Terminus20x10.psf is a font for codeset Lat2 with size of the font matrix 10x20 (i.e. 10 columns and 20 rows). If the number of columns is 8 then only the number of rows is specified. For example the font matrix of Armenian-Fixed15.psf has size 8x15.
In text video mode or if you use the RadeonFB kernel module only fonts whose font matrix has 8 columns can be used (that is the size should be a simple NUMBER rather than a NUMBERxNUMBER combination). The other fonts can be used only with framebuffer video modes and with the package 'kbd'. The console package 'console-tools' can not be used
with such fonts.
THE TERMINUS FONT:
The aim of the Terminus font is to reduce the eyes-fatigue when one has to read a lot. Currently this font supports only the Latin, the Cyrillic and the Greek scripts (the Lat15, Lat2, Lat7, CyrAsia, CyrKoi, CyrSlav, Greek, Uni2 and Uni3 codesets). The fonts with font face TerminusBold and size 14 or 16 are optimized for 8 pixels width glyph matrix (in most cases this means framebuffer). The fonts with font face TerminusBoldVGA and size 14 or 16 are optimized for 9 pixels width glyph matrix and can not be used with
framebuffer video modes.
The fonts with font face Terminus and size 14 or 16 can be used both with 8 and 9 pixels width glyph matrix. In the regular text video modes the width of the glyph matrix is 9
pixels. If you use the package svgatextmode then the width is 8 or 9 pixels and you probably know it. The Terminus font in this version of console-setup is version 4.26.
View 7 Replies
View Related
Jun 24, 2009
I upgraded in Ubuntu from 2.6.28-13 to 2.6.30 and now I get no line-drawing characters in applications like alsamixer; instead they are replaced by 127-bit chars like 'lqqk'. As a coder, I'd really like to understand what happened - what changed (file in /etc?) affecting terminal capabilities, and what does the kernel have to do with it .
PS: the distro is Jaunty and I used the debs at http://kernel.ubuntu.com/~kernel-mainline/:
Code:
linux-headers-2.6.30-020630_2.6.30-020630_all.deb
linux-headers-2.6.30-020630-generic_2.6.30-020630_i386.deb
linux-image-2.6.30-020630-generic_2.6.30-020630_i386.deb
View 2 Replies
View Related
Jan 8, 2010
I want to sort a number of lines based on their size:
data:
-------
12345678
87654321
1234
[code]....
Should output as:
-----------------
1
2
12
21
[code]....
But i'm gettings this with sort
----------------
1
12
123
1234
[code]....
Can we sort the above "data" text, based on "number of characters" instead of "character order"?
View 8 Replies
View Related
May 7, 2010
I am attempting to use putty in Karmic 64 bit - but on clicking open I get to a shell which I cannot type anything into;
Anyone know how I can enable typing into this shell?
View 9 Replies
View Related
May 11, 2010
I'm a web designer, and a key part of my job is to edit and make images and designs
On windows, I'm used to Fireworks, and illustrator.
Whats the equivalent in ubuntu?
Windows stinks, macs are overpriced, and linux rocks. taht's why im trying to design on linux :-
Also, do you think drawing pads will work on ubuntu?
View 2 Replies
View Related
May 11, 2010
So have you ever tried a drawing pad for GIMP before?
Do the drivers work?
What image/illustrator editor do you prefer?
View 2 Replies
View Related
Nov 1, 2010
We have a list of cyclones in the world. Now i got to check whether or not the second field is more than 1000 mm. If so, than the line has to have a[*] at the end of the line. For exemple:
Australia:1411:55.55:Mackay Cyclone 1918:1918:Mackay
to
Australia:1411:55.55:Mackay Cyclone 1918:1918:Mackay[*]
I also have to use a substitute. So far i've got this but it fails, 6,$s/([0-9])111:1/.* [*]
View 7 Replies
View Related
Sep 13, 2010
Any time the word The appears at the beginning of a line, I want to move it to the end of the line and capitalize the new first word in the line. For example, The heaven becomes Heaven the. I'm trying to test this out for my Library.
View 2 Replies
View Related
Mar 23, 2011
I have a bunch of files (around 900) that have some special characters. Some of the files contains example, and quoting "[useless] filename (something)"so what I want is just to strip the brackets and parenthesis, some are folders, others are text files
View 1 Replies
View Related
Apr 23, 2010
I am playing with various characters in the command- line interface trying to learn what they mean and when i should use them.
View 7 Replies
View Related
Feb 6, 2011
I wish to replace a new line with br (html) but it doesn't seem to work
Code:
message=$(echo ${FORM_message} | tr '
' '<br />' )
what it gives me seems to be ... b...? I am also having problem escaping hash sign in cut command:
Code:
list=$(echo "$line" | cut -d'#;#' -f1) ;
my intention is to split the line with "#;#"
View 5 Replies
View Related
Jul 14, 2010
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program(there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]".Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.?
(Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 7 Replies
View Related
Jun 24, 2011
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program (there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]". Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.? (Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 8 Replies
View Related
Dec 23, 2010
I have a log file that contains information like this:
----------------------------
r11141 | prasath-palani | 2010-12-23 16:21:24 +0530 (Thu, 23 Dec 2010) | 1 line
Changed paths:
M /projects/
M /projects/
[code]....
what i need is, i need to copy the data given between the "---" to seperate files, for, e.g. the first set of data between the "---" should be in one file and another set of data in another file.
View 5 Replies
View Related
Jun 14, 2011
Kernel 2.6.21.5, Slackware 12.0
KDE 3.5.7
(Mozilla) Firefox 2.0.0.4
Do color settings in the desktop environment affect color in the web browser? Thanks.
View 2 Replies
View Related
Aug 28, 2011
While modifying the definition of my PS1, I saw that "[" and "]" markers should be added to help bash to compute the right display lenght. Many exemples on the web do not use them or even mention them.I searched for a solution to add them automatically, like with sed, but I didn't find any example.Are they still needed and is there a recommandation not to use sed to define PS1?
View 1 Replies
View Related
Jun 3, 2010
I'm having a bit of a headbanger trying to work this one out. I'm trying to remove all of the characters on a line apart from the last 17. For example, I need to change this:
Code:
00000000000000000089;0bbfaeb8
01000000000000000089;0bcb5948
00000000000000000089;0bcc4c40
[code]....
View 5 Replies
View Related
Dec 29, 2010
I would like to replace 'xxxx' with 'yyyy' which is in a file xyz.csproj not sure of what 'xxxx' is, it can be 3055, 4056, 7089 etc. I know it always appears at line # 5 and at character 50.
<Reference Include="System.Management" />
<Reference Include="System.ServiceProcess" />
<Reference Include="System.Windows.Forms" />
[code]....
View 14 Replies
View Related
Dec 21, 2010
Probably an easy question but my googlefu is weak. How do I change the number of characters per line for konsole?
View 6 Replies
View Related
Jan 28, 2011
I'm having trouble getting a sed command to work. I need to filter a printed line to get characters between 2 expressions. "<job>" and "<url>".
Code:
echo "<job>TEST<url>http://www.project.com/?code=001" | sed 's/^[<job>]*//' | sed 's/[<url>]*$//'
Produces:
Code:
TEST<url>http://www.project.com/?code=001
It takes off the first part but why is that not deleting the "<url>" and all the parts after that?
View 9 Replies
View Related
Mar 19, 2010
I find that when I am using bash, I like to type clear <enter> ls.. or clear; ls.
I wanted to these two commands into a script called cls so I can call the script to clear the screen and list files at the same time. My script looks like this:
I did chmod a+x and put it into /usr/bin
The script works fine, except that when I execute it, the folders/files are not color coded. If I type clear; ls on the command line, they are color coded.
How can I make this work in the script?
View 2 Replies
View Related
May 15, 2010
I am trying to setup a putty session to putty from one Ubuntu machine to another. I know how to setup to connect to the machine from Windows and I am using the same settings for the one I am trying on the Ubuntu machine but it fails to connect. It fails immediately so I believe that putty is not able to find ssh. Is there some configuring that I need to do.
View 7 Replies
View Related
Jan 26, 2011
I'm having issue when trying to change a line in a file
[Code]....
View 1 Replies
View Related
Apr 6, 2009
Today I assembled a machine and installed Ubuntu 8.4...I think. When I opened Open office, more specifically the drawing section, the toolbars were full of a script font and I am not sure of how to change it to something I can read.
View 4 Replies
View Related
Jan 12, 2011
Can GNOME Color be used to alter this change directory color in Ambiance theme? I'd rather have white.
View 4 Replies
View Related
Jul 6, 2009
I am using the screen app, and have set bce to on, and issued the following commands to set my background and foreground color: tput setab 4; clear; tput setaf 7; clear;
This temporarily sets everything properly on my screen. However, when I issue any commands that change or set their own background color (for example, when I issue an "ls" command with colorized output), the background color gets lost for any new output and I have to reissue the commands listed above in order to retrieve my background color.Ideally I'd like to keep my background color when issuing these commands, as it serves as a good way to remind me of what environment I am currently issuing commands in.
View 1 Replies
View Related
Jul 8, 2011
What command could I use in terminal to delete all ASCII characters? That is, delete a-z, A-Z, 0-9, and all punctuation? I have a file containing Chinese characters, and I want to remove everything else and leave just the Chinese.
I can use grep to leave only the lines that have Chinese in them, but this still leaves a lot of non-Chinese stuff on those lines. Does anyone know how I could actually remove everything that isn't Chinese?
View 4 Replies
View Related
Feb 25, 2011
What is your favorite 256-color color scheme for vim?
View 6 Replies
View Related
Jun 16, 2010
I have my OpenSuse 11.1 box set up with utf-8, however, every time I try to open a file with utf-8 characters with vi it can't handle those characters properly.
View 6 Replies
View Related
