General :: OpenSuse: Build Is Installed But Not Recognized By Make?

Jul 3, 2010

I was trying to follow instructions in [URL]

There is a reference to build in my kernel (with red background), se below:

linux-om4s:/lib/modules/ # ls
build modules.alias modules.alias.temp modules.builtin.bin modules.dep.bin modules.symbols source updates
kernel modules.alias.bin modules.builtin modules.dep


Both make and build have been properly installed in Software Manager.

View 6 Replies


OpenSUSE :: Make: *** /lib/modules/ No Such File Or Directory

Feb 17, 2010

I'm attempting to install a WLAN card driver from source, as that's all that's available.I'm getting:

make: *** /lib/modules/ No such file or directory

Build appears to be a link pointing to "/usr/src/linux-"."linux-" doesn't exist.

View 4 Replies View Related

OpenSUSE Hardware :: Build / Make Custom Driver Into Kernel?

Mar 29, 2009

I'm new to linux and recently installed openSUSE 11.1 on my Lenovo Thinkpad SL500. So far it's great... only problem is the hotkeys and brightness control don't work. Digging around online I found this "experimental" driver that purportedly works fine, but I have no idea how to compile, install, or otherwise use it. Here... tetromino's lenovo-sl-laptop at master - GitHub I'm not sure what to do with the makefile and C file provided. For example, what do I do with this instruction...

"To enable the brightness control, load the module with the "control_backlight=1" module parameter (i.e. insmod lenovo-sl-laptop.ko control_backlight=1 )" I know someone on here will be able to explain how to do this in a "computer engineering for chemists" language! I'm comfortable enough working in the terminal with commands, but have found no real straightforward explanation of how to do so (only "programming" experience is MATLAB m file writing).

View 9 Replies View Related

OpenSUSE :: Error:make: *** /lib/modules/ No Such File Or Directory?

Oct 6, 2010

I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/ No such file or directory. Stop.
make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers- /lib/modules/ creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls2.6.31.14-0.1-debug

View 9 Replies View Related

Ubuntu :: Sd Card Not Recognized - How To Make It Recognized

Jun 2, 2010

I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...

View 7 Replies View Related

General :: Wireless Network Adapter Recognized Or Driver Installed?

Jan 17, 2011

I am brand new to Linux and Ubuntu. However it was very easy and smooth to install and get updated using my wired ethernet connection. I am now trying to understand how to have my wireless network adapter recognized or driver installed. I will be searching around the forums but it suggested I make an initial post as a new user. I am using an older Dell Inspiron 2200. I believe the chipset in my wireless adapter is indeed Broadcomm, so hopefully that will help direct any responses.

View 2 Replies View Related

General :: Build Kernel With 'make CONFIG_DEBUG_SECTION_MISMATCH=y' Using Ltib

Apr 29, 2010

I use ltib for mpc8272ads. How to build kernel with 'make CONFIG_DEBUG_SECTION_MISMATCH=y'?

View 3 Replies View Related

General :: Build Kernel With 'make CONFIG_DEBUG_SECTION_MISMATCH=y' In Ltib For Mpc8272ad

Apr 29, 2010

how to build kernel with 'make CONFIG_DEBUG_SECTION_MISMATCH=y' I use ltib for mpc8272ads

View 1 Replies View Related

General :: Getting Error : Make: *** /lib/modules/2.6.31-20-generic/build: No Such File Or Directory On 9.1?

May 9, 2010

When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory

View 1 Replies View Related

General :: Can't Build RRDTool On RHEL4 - 'make' Command Give Error Message

Mar 19, 2010

I'm new to LinuxQuestions and this is my first post. I'm trying to build rrdtool to install Cacti and encountered the following problem: 'make' step returns an error messages:

./.libs/ undefined reference to `xmlTextReaderGetParserLineNumber'
collect2: ld returned 1 exit status
What I have doneDownload and build the latest version of pkg-config, glib, pixman, cairo, pango, atk, gtk+ from official sites.
Download rrdtool source
Set PKG_CONFIG_PATH correctly


There is actually another problem with the computer which is "The Nautilus application has quit unexpectedly" everytime I open File Browser application or right-click>Properties a file/directory. This happen only after installing cairo and pango and I don't know how to revert to old version. Since there are a lot of log files so I'm very confused. Can someone give me a direction on how to resolve this?

View 3 Replies View Related

OpenSUSE :: Find All The Build-deps Or What They Are For That Matter To Build Boxee

Feb 20, 2010

I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:

1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.

2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.

What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.

View 9 Replies View Related

OpenSUSE :: Build Libevent-dev 2.0.10 In Ooder To Build New Version Of Transmission?

Feb 16, 2011

looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.

View 1 Replies View Related

OpenSUSE :: Ant Build.xml Does Not Exist - Build Failed

Apr 19, 2011

Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.

View 5 Replies View Related

OpenSUSE Wireless :: BCM4303 Firmware Installed - Can't Make A Connection OR Scan For Networks

Aug 17, 2011

HTML Code: first I'll provide the requested information (from the sticky)

64-bit openSuSE 11.4
uname -a output
Linux linux-mx43 #1 SMP PREEMPT 2011-07-21 02:17:24 +0200 x86_64 x86_64 x86_64 GNU/Linux
dmesg | grep firmware
[ 127.965048] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
lspci output:


I've configured the device for my network's settings in YaST's Network Settings tool. Is the card turned off by the kill switch? Where do I find the kill switch?

View 7 Replies View Related

General :: How To Make CD Image From Installed OS

Dec 23, 2010

I have recently upgraded RHEL 4.8 to RHEL 4.9 Beta.Since 4.9 ISO are unavailable and has to be fetched through update from RHEL 4.8.Can I anyhow create ISO of RHEL 4.9 Beta?Why Beta..becoz my team test pre-releases too.

View 1 Replies View Related

Programming :: Build A Package Using A Different Lib Than The One Installed?

Jul 11, 2011

Is is possible to compile (but not install) a library, and then compile a package using that library instead of the version that's installed?

View 4 Replies View Related

Software :: Make Sure That Software RAID1 Is Recognized And Make Sure No Data Is Lost?

Jun 21, 2010

I currently have 3 500GB drives, 1 is my OS drive with Ubuntu 10.04, and the other two have been setup in a software RAID1 (mirror). I would like to resize my Ubuntu partition and install FreeBSD to try it out. How can I make sure that my software RAID1 is recognized and make sure no data is lost?

View 2 Replies View Related

Fedora :: Openoffice Installed But Not Recognized

Oct 29, 2010

I have openoffice installed but when I click on .odt or any other file types associated with it, it opens the archive manager. For now, I have added the application using "soffice" which will open it. But I have to right click every time I open it, which I don't like, and is a little bit embarrassing when I show off my system to those poor prisoners of microsoft.

I had a hayell of a time getting it installed! I used the software manager which finally worked. But it never put any menu shortcuts in the applications menu, so I had to go on an easter egg hunt to actually find this "soffice" thing, which actually only opens up the general Open Office project manager.In short, what I need is for Open Office files to open with Open Office.

View 13 Replies View Related

General :: Build System For OpenSuse 11.3

Feb 13, 2011

I'm new to Linux, and want to build a system for openSuse 11.3 on Friday.I plan to buy everything then.I'm using Ubuntu now on my laptop.My question is what do you think of the P4 prescott e series 800 mhz FSB as a processor for openSuse.Offer other processors if they will do a good job.

View 1 Replies View Related

General :: External TB HD Not Recognized By OpenSUSE 11.3/

Jan 16, 2011

I have gone through Mint, Ubuntu, Fedora, and continue using them on different PCs but I recently had a problem with my graphics card on new releases.. another story all together.So I am using OpenSUSE 11.3 on my Dell inspiron 1526 AMD 64 bit. I have always been able to plug in my external HD and have it show on my desktop. Now with OpenSUSE something is different. I tried other flash drives, all show up and open to view on their own, but my 1GB ext HD doesn't. I am not a pro with the Terminal yet but I prefer to use it and am good at reading and copying commands from online.

jason@linux-z81g:~> lshal -m

Start monitoring devicelist:
04:35:12.017: computer_power_supply_battery_BAT0 property battery.voltage.current = 12479 (0x30bf)
04:35:17.813: usb_device_1058_1102_57442D574341553432313937303738 added
04:35:17.833: usb_device_1058_1102_57442D574341553432313937303738_if1 added
04:35:17.839: usb_device_1058_1102_57442D574341553432313937303738_if0 added

as you can see it says "My Book" which is the name of my ext TB but where is it and how do I mount it?

View 14 Replies View Related

General :: Installed Squid Server - How To Make Tranceparrent Proxy

May 18, 2010

I have installed squid server.. but how can i make tranceparrent proxy?

View 1 Replies View Related

OpenSUSE Install :: Build A Multiseat System (Build A Six-headed Six-user System LG #124)

Oct 1, 2010

I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA

00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices


I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...

So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)

View 11 Replies View Related

Ubuntu Networking :: USB WiFi Card Recognized, Not Installed?

Apr 1, 2011

so I had to reinstall Ubuntu.But now my Wireless card won't work. It used to work before (plug and play), and I have no problem with it when I boot from the CD.I cannot use my cable connection because as soon as I plug my computer in, the network crashes, the router doesn't respond, gets hot and refuses to work until I unplug it and let it cool off for 2 minutes.I'm using Ubuntu 10.10, Desktop PC.

:~$ lsusb
Bus 001 Device 002: ID 0846:4260 Netgear, Inc. WG111v3 54 Mbps Wireless [realtek TRL818B]


View 2 Replies View Related

Debian Configuration :: Remove The Packages Installed From Using Build Dependencies

Jun 15, 2011

Does aptitude(or apt-get) have the functionality to remove the packages installed from using build-dep? It just seems convenient if you want to remove a program that was built from source.

View 4 Replies View Related

General :: Cowon S9 Not Recognized In Banshee Or Rhythmbox OpenSuse 11.3?

Dec 28, 2010

i am not real sure where to place this thread, so i will try here first. i have a Cowon S9 mp3 player that i like to plug into my computer and play music through Rhythmbox under Ubuntu. I have been trying other distros (OpenSuse 11.3 being my current distro). However when i plug in my mp3 player to my OpenSuse box, it doesn't show up in the side bar of Rhythmbox like in Ubuntu. I have shutdown my firewall, i compared the installed plugins under the OpenSuse Rhythmbox to those under Rhythmbox under Ubuntu and they are the same. i've tried Googleing my problem and have not found a solution. Either i am not entering the correct search terms, or NOBODY else is having the same problem i am. I have OpenSuse installed on both my laptop and my desktop and I have the same problem with both.

View 1 Replies View Related

Ubuntu :: Build Deb Packages For Two Versions Of Same Product That Can Be Installed On The Machine Simultaneously

Apr 28, 2010

I want to build deb packages for two versions of same product that can be installed on the machine simultaneously. The source folder structure for both the packages have a common folder needed by both the versions. So i need to keep the common folder till both the versions are removed from the machine.My problem is that i can't install both the versions at the same time, i.e i have to uninstall the installed version and then install the other version. After installing one version, if i try to install another version, an overwrite error comes up. is there any option in dpkg for overwrite? Or is there any way to partially uninstall a deb package?

View 5 Replies View Related

Ubuntu :: LTIB Showing Package Not Present: Rpm-build Software Not Installed

Oct 15, 2010

ltib is showing following package not present: rpm-build Software not installed, even though rpmbbuild is already installed. I am trying this on Ubuntu.

View 1 Replies View Related

Ubuntu :: Make A Automated Build-script With Bash

Apr 13, 2010

I'm trying to make a automated build-script with bash but i keep getting different errors.


gpg --import /home/epm/first_installation/config_chroot_sources_local.gpg
gpg --import /home/epm/first_installation/config_chroot_sources_packages-inl-fr.gpg


View 5 Replies View Related

Programming :: Make A Automated Build-script With Bash?

Apr 14, 2010

I'm trying to make a automated build-script with bash but i keep getting different errors that I can't seem to figure out. Could anyone please tell me what's wrong with this package of build-scripts? I'm posting the main build-script and attaching the rest of the scripts in a compressed form. The errors mainly comes from the scripts in "/first_installation/usr/share/siem-live/init"


View 2 Replies View Related

Programming :: Make An Automated Build-script With Bash

Apr 14, 2010

I'm trying to make a automated build-script with bash but I keep getting different errors that I cant't seem to solve for various reasons. what's wrong with this build-script? I'm posing the main build-script and attaching the rest of the scripts in a compressed form. Buld-script link: [URL]


View 3 Replies View Related

Copyrights 2005-15, All rights reserved