I am trying to set up a mailer server on Lucid Lynx using mostly this guide: [url]
I believe I have most of the basics covered. But before launching into the the advanced set up, I want to see if I can get help with one thing I am finding difficult to understand.
In terms of my domain name www.example.com, do I have to do anything on my hosting company's side? That is, www.example.com currently have my web site and it is hosted on a private server at a hosting company. I have the ip address of the server. When I configured postfix, i used this same domain name in the configurations so I want to know what else to do to get it working.
It works good , but sometime it NEVER respond (neither after 1 hour) , so I receive no notification . DO you know alternative command to the command above ?
Iam handling mail server in redhat.MTA using is qmail.since last 1 month it get overload and get hang...since in morning its time for user to loging into mail through web interface.though suddenly login in to mail it get overload and server got hang.we need to restart the server...did not get time to kill https also some time MP port work to save us...still didnot get command to overcome the over load in server...
I have followed the guide for "The Perfect Server - Debian Lenny (Debian 5.0) With BIND & Dovecot [ISPConfig 3]" and all is well, except.
I can send mail (to GMail) from commandline. I can send mail (to GMail) from any of the domains configured in ISPConfig3 through SquirrelMail (how ever terrible that looks, but functions) or IMAP/POP.
but....
I can't receive mail (from GMail) on any of the domains configured in ISPConfig3 in SquirrelMail or IMAP/POP.
I have my domains configured with proper MX records (just like I have them configured at work). I have all ports (80, 143, 110, 25, 22, etc) forwarded on my router that are needed.
I can Telnet to localhost and all checks are fine. I can send and receive from and to local domains on the same server, which makes sense. but
I can't Telnet from any external server to my server behind NAT.
Conclusion:
I figured it MUST be a network/port-forwarding problem as the external Telnet requests fails to my machine on port 25.
Tested my router if it would let met communicate through port 25 and it would.
So it must be my ISP, as I read in different posts.
Question:
Maybe I'm a n00b, but in all other posts the problems were with receiving AND sending.
My ISP responded that port 25 is blocked because of spam issues.
But I can mail (and even spam if I would like to) to external domains while I didn't do anything weird to make that happen.
The only thing I wish for is to receive mails and if you'd ask me, port 25 would be solely for outgoing mails, not for incoming mail deliveries throught MX?
An ISP surely wouldn't disable their customers in having a mail-server for incoming mails, as long as they would send out through their own smtp server to make sure they wouldn't spam the world?
Im using posfix as a outgoing mail server, here i want to distribute the mails to different ips to avoid the ip blacklisting. I found a solution by using multiple transports , but here one thing blocking me was i could not able to select a transport using regexp or pcre matching pattern, log says that
Code: Jun 5 07:12:49 server postfix/trivial-rewrite[6079]: warning: pcre map /etc/postfix/transport.pcre, line 1: regular expression substitution is not allowed: skipping this rule
I recently set up a mailserver on ubuntu using postfix. I set up the MX record with my router's ip address and I have port 25 forwarding all the mails to the ubuntu server. Everything works fine but I am unable to access my email using example.com/squirrelmail from any other machine apart from the server.
can i just copy/backup postfix mail queues in /var/spool/postfix and paste that folder back in after i done migrating all users and mails to a new mailserver?
I have two boxes, 1- Centos router, 2- centos web/mail server..
When trying to receive mail using mail.xxx.xxx in the mail client server settings, it will not resolve to any machine on the internal network... I have to enter the internal IP address in the incoming and outgoing email settings..
Same with the website I host.. I have to enter the internal IP to get access..
It just will not resolve the DNS on the internal network.
I recently created a webserver to host my website, using a Ubuntu 8.10 based system. (With some help from my experienced brother of course).I now want to create a mailserver to go along with my website. In setting up postfix to work with gmail smtp servers, I ran into a lot of permission errors.
I want to run a mail server from within debian linux guest with vmware workstation xp host. The setup is a bridged network connection
Here are things that need to be done:
a)Configure the Guest with a static IP on my home network. Verify that I can telnet to port 25 of the Guest from a system on my home network.
b)Then configure my home firewall/NAT box to forward incoming connections on TCP port 25 to the static IP address I gave my Guest. Then test that I can telnet to port 25 from a system outside my home network.
c)After that I need to configure the appropriate DNS records for my domain so that outside hosts know how to contact my mailserver.
Does a mailserver have to have direct access to WAN or can it be a LAN device with just one NIC ?
We have two WAN access points.
One is an adsl router joined to the switch and all seems fine for internet browsing.
The other is a wireless system with a linksys router joining by way of PPPoE and this appears to connect fine.
This PPPoE is direct to our ISP and where we need to downlod our mail to our pending mailserver.
When the linksys router is also joined to the switch all devices can use either the adsl or linksys to roam the net. 192.168.1.1 linksys & 192.168.1.10 is adsl.
When I join the linksys direct to the mailserver I will then need two NIC's. One for the Linksys and one for the LAN.
This is where the fun has started.
So.... Can I just have one NIC (connected to the switch) on the mailserver?
Still trying to get that elusive simple mail server. Have install Centos 5 (20 time!) and updated software. Have got the system to see www and now about to do the mailserver thing. One of the first steps is to install Clamav yet this does not show on the package list for the program add delete gui. Tried yum install clamav and got message back that it wasn't available.
Google advises that I must first install rpmforge but at the same time has a warning from the maker of yum that this is dangerous to do Clamav is clearly a very popular antivirus scanner yet Centos 5 does not include it or allow you to install it?
I hope someone can help me setting up receiving e-mail on my home server. Ubuntu Lucid and Zarafa from repository. Zarafa is running well. I can send e-mail via the relay smtp host from my ISP. But though the e-mail address should be correct I never see this e-mail appear in zarafa inbox.The e-mail reaches the server via an open 25 port forwarded to my server, but it seems postfix does not know how to handle it. Or is there something else going wrong here? Below are my settings. These are the settings I added or edited. the rest is Ubuntu Lucid (10.04) standard.
How to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
I'll try to describe my question as clear as possible.
- I have purchased a domain name : *****.md - In the panel of registrar I have only the following options to complete : Primary NS Hostname Primary NS Netaddress Secondary NS Hostname Secondary NS Netaddress
- At home I have : a)a WiFi router that is getting an external IP from my ISP provider (internal address of router is 192.168.1.111); External IP from ISP is STATIC.
b)a computer which I use as server (ubuntu 10) with internal IP 192.168.1.100 (I get it by DHCP from Router but it can be set as static of course);
- On server are installed : a) Apache + Mysql + PHP b) Ftp serv c) Webmin d) SSH serv e) Bind9 DNS serv
- On my WiFi router there is an option "Forwarding -> Virtual servers" where I setup the ports 53 + 80 to forward to my server and I can access from external my site by IP.
All I want is to have my site *****.md to run on my server and to be visible to external world.
I have searched Google for last 2-3 days for a solution but everything I try doesn't help.
I'm new in Linux ( 1 week probably). Everything except DNS server Bind I was able to setup and are working well.
Scenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
I want to run rsync on server A to copy all files from Server B when they are newer than 7 days.(find . -mtime -7) I don't want to delete the files on Server B.
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555 Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
i have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.
How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute
dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.
how i have a machine installed Red Hat Enterprise Linux Server release 5.1 with 2 modem (usb & com port) still i want to configure RAS server so some pple able to connect my server and send me some files.
How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
I cannot ssh into an RHEL 5.5 server (192.168.20.104) from another RHEL 5.5 server (192.168.20.101) unless server debug is turned on 192.168.20.104, and even then, I have to wait several minutes before the connection is established. scp to and from the 104 server is also not working.Here is the debug output on the 101 server when server debug is not enabled on the 104 server-:
I am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex. domain1.com -> exim domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
I am implementing an automated backup scheme so I created a shell script which first creates SQL dumps for all MySQL databases, then retrieves all websites from the /var/www directory of a remote server. The latter is working as I am using rsync to get the remote files.However, the MySQL dumps being retrieved are the ones from the local server which is not what I want. I want to get the SQL dumps from the remote server as well.I have a tunnel between the local and remote server which I can connect to without using any password (I added the public key to the authorized_hosts), so I tried to add the following code to the script:
ssh user@192.168.x.xxx
I then attempted to retrieve the SQL dumps and exited from the remote server. However this does not work as I still have to enter exit manually in the terminal for the SQL dumps to be retrieved from the remote host. I don't know why this is happening. This is what the script is trying to do:
//connect to remote server ssh user@192.168.x.xxx //retrieve SQL dumps
[code]...
Is there a way to connect to the remote host AND run the script's code on THAT remote host?
i tried to connecting from a windows7 client to a linux server through vnc server.But its very slow , is there any alternative for vnc . i heard that samba can be used as a remote desktop tool if its true please reply with configuration details.
