How to install the BitTorrent peer to peer program? I've downloaded the software, looked around, and cannot find what should be obvious as to how to install and use it. Please keep it simple, as I am an amateur and quite new to Linux and Ubuntu. I'm installing onto Ubuntu 9.04 on my desktop pc. If you suggest using and installing something equivalent, the instructions need to be simple and complete.
View 3 RepliesHow can I see a description of a program or read its man pages before doing apt-get install program?
View 2 Replies View RelatedI am running Linux mint 9 Isadora and do not like thunderbird email client. I have downloaded Evolution and can't get it to run. I opened it with archive manager and see many files, but it does not run.
View 3 Replies View RelatedI want to install a program (specifically metasploit), and have it accessible from any directory in the terminal. I have it installed correctly, but I have to travel to the directory it is installed in to run it (by using ./msfconsole ). I want to be able to be in any directory and just run "msfconsole" and have metasploit run. I have to copy the metasploit folder to the /opt/ directory? Maybe the /usr/bin/ directory?
View 3 Replies View RelatedI know there is lots of documentation out there for installing tar balls but I can't make it work I am trying to work with this file sauerbraten_2009_05_04_trooper_edition_linux.tar.bz2 in file:///home/Nemesis/Downloads/sauerbraten_2009_05_04_trooper_edition_linux.tar.bz2
I am running Fedora 12, the gnome desktop if the desktop matters. I have been running Fedora almost elusively for 2 years and off n on before that but in my many attempts at trying to Install a TARBALL I have always failed hard.
I am trying to load vmware server. When running vmware-install.pl it asks where to load the bin files. Default is /usr/bin. Cool with me, so I accept then get the error:
"There is insufficient disk space available in /usr/bin. Please make at least an additional 5924k available or choose another directory."
Ok, so in my searches, most cases people actually do have a full disk. I have 30gb free. Another post somewhere stated it could be the file system used, so I tried different file systems. Now I am back on etx3. What's odd is when I blow away the OS and reload and try to install VMware again, I get a different number to be "freed" in the error. Choosing another directory only yeilds a different disk space request.
I want to install bittorrent-5.3-gpl.tar.gz. How to install it.
View 2 Replies View RelatedI have install bittorrent in my rhel5 box.Now i want to know how to download centos using bittorrent.even i dont know how to use bittorrent.
View 3 Replies View RelatedI have a virtual server which acts mainly as mail server. I wonder whether I could set up a mirror for certain files like Linux ISO images, conference talk recordings and other stuff.How could I seed automatically all torrents from XML feeds plus torrents added by hand? Further conditions: The data files should be accessable via HTTP/FTP, too total traffic and bandwidth uage need to be restricted, plus bonus points for restrictions per feed or file.
View 1 Replies View RelatedI am installing a program on a server as a non-root user. Specifically it is tmux 1.5, but this should apply broadly to all locally installed program in my opinion (I mention the program name in case this problem ends up not being my own error).
The program requires me to install some dependent libraries (e.g. libevent and ncurses). So, I installed them both locally since I do not have root access
cd $HOME/library/installation/folder
DIR=$HOME/local
./configure --prefix=$DIR
#... make ... make install
[Code]....
Ok, so this installs the program without problems into $HOME/local/bin, but if I run the executable: $HOME/local/bin/tmux , I get the following error:
tmux: error while loading shared libraries: libevent-2.0.so.5: cannot open shared object file: No such file or directory
It would seem to me that the program cannot find the desired libraries, but the file libevent-2.0.so.5 does indeed exist in $HOME/local/lib as specified in the configure options. I am wondering how I can get the program to recognize the installed library in order to run. I tried putting symbolic links in $HOME/lib, $HOME/bin, and $HOME/local/bin, but none of these worked.
The config file is ambiguous, and keeps getting overwritten when you restart the daemon in Debian, anyway.
In /etc/transmission-daemon/settings.json, there are these options:
rpc-username
rpc-password
proxy-auth-username
proxy-auth-password
Every time I restart the daemon with:
/etc/init.d/transmission-daemon restart
It overwrites rpc-password, and the password it prints doesn't work anyway.
Does anyone know how to set the password properly? I don't want to disable it.
Is there command line BitTorrent Client in Linux? A PHP / Python script would be nice too.
View 7 Replies View RelatedI am running Ubuntu 9.10 and had hoped to use Synaptic to find and install Truecrypt. As Synaptic couldn't find it I downloaded it from [URL]. In case it helps the file is called "truecrypt-6.3a-linux-x86.tar.gz". Apart from not knowing how to get a working program from the .tar.gz file, I don't know whether the installation process sorts out where the file should go and puts it there, or whether I have to create a directory for it and put it there myself.
View 11 Replies View RelatedI'm trying to install a program called Slam Soccer 2006 (it's original name is bolzplatz2006). Anyway, no package is available, so I'm having to install it using the tar.gz file. I've read all the Documentation that I could find on ubuntu sites, and I think I understand the extract, configure, make, install process. However, I keep getting stuck on the ./configure phase. When I type ./confiure into the command line it keeps telling me that no such command exists. I tried downloading Kludge Tarball installer so I could have a graphic interface to walk me through the problem. Everything seems fine until I get to the configure phase and I get the following message:
sh: Can't open configure
(zenity:907: Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 4 char 128: '.' is not a valid name
(zenity:907: Gtk-WARNING **: Failed to set text from markup due to error parsing markup: Error on line 4 char 128: '.' is not a valid name
I've just installed Ubuntu on my laptop. This is the first time I've ever dealt with linux, and was very much a spur of the moment thing (probably not ideal, I know). My laptop is only small and does not have a disc drive.I would like to install World of Warcraft onto my laptop. Usually my plan of action would be to pop the files under Program Files onto an external hard drive, then copy them over and voila.I'm not 100% sure what the Ubuntu equivalent is to Program Files. Google search suggests usr/bin, but it requires permission to move files there and I'm really not sure how to go about doing this.
View 3 Replies View RelatedI recently got a new netbook and the first thing I did was install ubuntu along side the XP install. The problem I'm running into right now is when I try to install a statistics program that I need for class I get an error. There is a popup labeled RegUtil with the error "Run-time error '5': Invalid procedure call or argument" and in the terminal window there is the message "wine: cannot find L"C:\windows\system32\netsh.exe."
View 9 Replies View RelatedIs it possible to install just one program from newer repositories? Our server is Ubuntu 10.04 but I need the newer ImageMagick which is available in the 10.10 repositories. If I use these repos, and try to apt-get install imagemagick, I am prompted to install 20 or so other new programs, which I fear will mess up the system.
View 2 Replies View RelatedI have a really old Dell computer (Dell PowerEdge 1300) that I am wanting to use as a small server (samba file server and apt-cacher-ng). I installed Ubuntu server and then did "sudo apt-get install --no-install-recommends ubuntu-desktop" which was a bad idea because it killed the performance.So here is my question.Ive read you can split the X client and server. Would that let me run a graphical program (like Synaptic) over X without installing any sort of GUI on the Dell?If that is the case, how would I go about doing so?If I would still have to install a GUI on the Dell, what are other options since the on-board display adapter seems to struggle with graphics?
View 3 Replies View RelatedI've been trying to install MPGrafic (google it to open the package) without succeeding. (I also have in my home directory). The problem is that, in order to install it, I need the 2 version of the fftw (I've downloaded the 2.1.5 from the fftw website). I install
everything in the folder /libraries (I don't have writing permission on the /usr/lib folder)
./configure --enable-mpi --enable-type-prefix --enable-float
--prefix=/libraries
make install
[code]....
I got an error: I need the fftw with double precision. So I think the ./configure does not read the library properly, or I need another version of the library or I need other flags.
I installed Wine no problem. Then I downloaded a Windows Chess program(ECTool) to the desktop. I right clicked on the ECTool icon and checked run with Wine. The program came up just fine and I could make moves on the chessboard, but no information was saved. I got a blank screen under games in progress. Anyone use this program or have any ideas what to do next? ECTool is listed as a program that works with Wine.
View 5 Replies View RelatedI am having a problem with installing mysql and mysql-workbench. I installed a group of packages related to mysql on my system and it seemed to work fine. Due to an error in my setup, I decided to uninstall all the mysql packages and start from scratch. On my second try, I was able to load all he packages except mysql-workbench
I get the following error from the Add/Remove software application. workbench-5.2.30-1.fc14.i686: failure: mysql-workbench-5.2.30-1.fc14.i686.rpm from updates: [Errno 256] No more mirrors to try. why I can not get the package again to install?
I have rented a VPS based on CentOS5 (naturally) from Burst.net who use a front panel by vePortal.I can't access it by its own shell and am told that CentOS5 does not come with FTP or Putty access. THey must be installed by me.(I'm not sure of the support competence at the provider, so I've come to the source)I think/hope that such basics would be part of the primary OSystem?How would I install programs onto a system with no such access?
View 1 Replies View RelatedI'm running Ubuntu 11.04 (also Classic, don't really care.) I'm trying to install [Greeting Card Factory DELUXE V7] Can anyone help me or does anyone have any clue whatsoever if this can be achieved?
View 3 Replies View RelatedI am new to linux and am trying out script writing. I am using shell. How can I make a script to open a program then operate within that program?
View 5 Replies View RelatedI'm new to linux and try to make a ubuntu home server.1.One of my concerns is that i can't figure out how to use bittorrent (or any other torrent download application) from shell. (i have the desktop package installed but i don't wanne get used with that - or should i start the downloads from there but if I close the gdm (gdm stop) will my bittorrent stop as well?)
View 9 Replies View RelatedIam always downloading files using transmission bittorrent, the problem is my sister always keep pausing my all my downloads because it somehow slows her internet speed in her rooms computer, any way I can have a password prompted every time she pauses all my downloads in transmission?
View 3 Replies View RelatedCan I Remove Pause in BitTorrent?
View 2 Replies View Relatedthey ae all closed and i don't know what to do about it
View 9 Replies View Relatedp { margin-bottom: 0.08in; }a:link { } Is it possible to use Transmission BitTorrent like limewire?
If so how? I am not familiar with terms like associated 'torrent file and 'tracker' websites'' The help files at the Transmission website assume a high level of preexisting knowledge. Is there a way to learn this program starting from scratch?
I am trying to install a program and it spews out an error about the .obj/matrix.o file.
The output is quoted here:
Code:
The program I was trying to install is a robot simulator which performs lots of matrix manipulation and linear system solving. I followed every step in the installation guide, except for this one:
On Ubuntu, all you need to do is install the following packages from the package manager:
libblas-dev
liblapack-dev
As shown above, I am using RHEL 6, which has different libraries with Ubuntu. I tried "yum search" and installed these libraries instead: lapack.x86_64 : Numerical linear algebra package libraries blas.x86_64 : The Basic Linear Algebra Subprograms library.