General :: Installed Python Module Is Not Found?
Jul 10, 2010
This borders on stackoverflow/superuser, but I guess it's a simple installation problem.I've installed python-twisted on my ubuntu 10.04 server, but it can't be found.This is what I get when I try to import something:
>>> from twisted.internet import reactor
Traceback (most recent call last):
File "", line 1, in [code]....
I've installed the package through apt-get.That way the module is installed in this folder: /usr/lib/python2.6/dist-packages/twisted with an __init__.py file.When I try to use python setup.py install (on the download from the site) it installs it to /usr/local/lib/python2.6/dist-packages/twisted, but it also does not find it there.
View 1 Replies
ADVERTISEMENT
Jan 8, 2011
I installed openxenmanager without a problem. but when I tried to start it I got: ImportError: No module named gtkvnc
the start script is in python, and I am using python2.5 to run it. I already installed
gtk-gtk-vnc.i386 0.3.8-3.el5 installed
gtk-vnc.x86_64 0.3.8-3.el5 installed
gtk-vnc-python.x86_64 0.3.8-3.el5 installed
Note: when I use python2.4 I got another error and it skip the previous one, the error is: ImportError: No module named hashlib
and when I comment it the application is running but with errors.
View 1 Replies
View Related
Aug 5, 2011
How do I install the Python module for Gnash?
But apart from that, what basic concept am I not understanding about installing packages on Linux?
I am used to installing packages using package managers - mostly apt-get and zypper. I have occasionally installed from source, often with no trouble. However I recently installed Gnash and discovered that it has a Python binding that must be compiled from source and this has led down a rabbithole making me feel stupider at each turn.
First, I attempt do a ./configure --enable-python in the gnash source dir. This ends up failing with an error that
package pygtk-codegen-2.0 isn't found
The lead developer, Rob Savoye, was kind enough to point me at packages.debian.org, telling me I just need to locate this package. After many failed searches, I found that the python-gtk2-dev package contains this ... file? script? Great, but I couldn't figure out how to obtain the python-gtk2-dev package. It doesn't exist in any of my openSUSE configured repositories.
So I headed to the GNOME site and searched, found that the PyGTK package contains pygtk-codegen. Download the tarball, cd, ./configure, and this fails because I don't have GLIB. After some more searching I use zypper to install glib2-devel (libglib-2.0 was already installed), and now PyGTK fails to configure because I don't have GObject.
Find that, download tarball, cd, ./configure, fail. I don't have gobject-introspection-1.0, apparently. I DO have gobject-introspection installed, and it's version is ≥ 1.0, but that's what the script says.
So I will readily admit I am new to Linux, but I have to be missing some basic step here. Can anyone give me a clue about any of the above? Is it normal to have to install one dependency after another like this? Is OpenSUSE the wrong distro? What would make this process not so horrible?
View 2 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Sep 7, 2010
I was trying to install dm-ioband on a fedora 13 OS with Linux kernel 2.6.32.21. I apply the patch. Compile the modules and give module_install. When I do modprobe, it says dm-ioband module not found. When i checked the Kconfig file inside the drivers folder, i cannot find the dm_ioband patch applied to that file. As per the patch file, it should paste some 10+ lines in Kconfig file on line 320. But I dont find line 320.
View 1 Replies
View Related
Aug 13, 2010
I made some progress trying to get a host that has an Nvidia GeForce 6150 LE and running a liveCD version of Xubuntu 9.10... but "modprobe -i nvidia" returns "FATAL: Module nvidia not found."
View 5 Replies
View Related
Apr 18, 2011
I installed a newer version of python in /usr/local/bin/python2.6. Now I want to use that python and only that one. When I type "Which python", I want to see /usr/local/bin/python2.6, NOT /usr/bin/python, which is old one (2.4). Also, I want to see the same even after I reboot. How do I do that?
View 2 Replies
View Related
May 13, 2011
I am new to linux. I want to make use of an ".so" module in my python programme. I have successfully installed the ".so" module by a setup file. But when I try to import the ".so" module in my python programme I am getting an error like ImportError: /usr/local/lib64/python2.5/site-packages/_first.so: undefined symbol: __fread_chk.I am working on opensuse server. Please let me know if you require any further information.
View 2 Replies
View Related
Dec 29, 2010
I have installed three flavors of linux on vmware
1.rhel5
2.centos 5.5
3.fedora 14
and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error:
"fatal : module fuse not found"
"ntfs unknown file system"
View 14 Replies
View Related
Jan 3, 2011
I need to mount NTFS drive on RHEL 5.1. I tried NTFS-3g & FUSE as well, but still getting
FATAL: Module fuse not found error.
View 10 Replies
View Related
Sep 30, 2010
I need to use a pendrive with the Slackware 13.0 and I've tried a lot of things I've found at the internet but unfortunately they didn't work. It's not possible to use graphical interface because some reasons. So the problem need to be solved by command line.
When I use "lsusb" command, I can see the pendrive.
However, when I try these:
I got the following message: "Module usb-ohci not found" and "Module usbcore not found"
How can I deal with these problem? Because I guess without these module loaded it's not possible to mount the pendrive. Is it right?
View 7 Replies
View Related
May 12, 2010
After trying to upgrade from fedora 10 to fedora 11 gui and yum will not run. When i try to use yum i get a message that module urlgrabber is missing or wrong version. also libssl.so.7 is missing.
No yum options work.
View 3 Replies
View Related
Oct 7, 2010
I have a testing server (Centos 5.4) with cpanel installed, once i ran a script which erases log files by using the find and rm command.
Anyway looks like this script deleted one of the modules to python, the logging module. so python stopped working, i thought reinstalling it should solve the problem so i downloaded the tar ball and reinstalled python from source and it's all the same.
Now yum command isn't working because it's giving me this error "no module named logging".
I decided to synchronize the whole python folder /usr/lib/python2.4/ from the live server using rsync and it did not help
I searched for the yum rpm package and i downloaded and installed yum-3.2.22-20.el5.centos.src.rpm using rpm and it did not help.
View 5 Replies
View Related
Jan 14, 2010
Just throwing out a blanket call to see if anyone has been able to install the Pycrypto module (2.1.0) from source using Python 3.1.1? I have been able to get past two minor errors:
1. Error -
File "setup.py", line 46
raise RuntimeError, ("The Python Cryptography Toolkit require "
SyntaxError: invalid syntax
Solution - remove comma (,) and space prior to bracket
[Code]...
View 1 Replies
View Related
Apr 9, 2010
I'm trying to run a backup script in an application which reports the following error message:
Quote:
** An error occurred while performing the backup process. **
Exception -> ['Traceback (most recent call last):
', ' File "backupdb.py", line 402, in main
', ' File "wtbackup.py", line 2665, in main
[Code]....
View 6 Replies
View Related
Feb 3, 2011
I am trying to get the python GUI working for OpenIPMI on Ubuntu and I can't find the required OpenIPMI python module. where to find this module suitable for Ubuntu 8.04.4 (Lucid)? There are RPMs available for different RedHat flavours but I can't find anything for Ubuntu.
View 2 Replies
View Related
Nov 9, 2010
I'm using openSUSE 11.3. In the Yast2's module: Software Management, in the search tab, there is a column called: "Installed (Available)", It usually shows the current installed version of the package, but sometimes its blue, red or most of the times black. What does the color mean?
View 1 Replies
View Related
Jan 14, 2011
Streamtuner2 installed via yum under either F13 or F14 complains that the pyquery python module is missing. My vague understanding is that it is relevant to parsing some xml. Pyquery doesn't seem to be in rpm form in any of the repositories, but can easily be installed from source:
As root:
Code:
yum install mercurial
As a regular user:
Code:
hg clone [URL]
cd pyquery
python setup.py build
As root, in the pyquery directory:
Code:
python setup.py install
Streamtuner2 works without pyquery, but I'm guessing can parse information about more streams with it.
View 2 Replies
View Related
Jun 8, 2011
I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command
#modprobe ntfs
but it say FATAL: Module ntfs is not found.
View 1 Replies
View Related
Feb 7, 2010
Why is there no opensuse jack audio client module for python like pyjack.
View 2 Replies
View Related
Sep 28, 2009
I was trying to install MySQLbd (a module for python to connect and access MySQL) I followed these steps for installation[URL].. but while I am getting some installation errors. When I try to run $ python set.py build I am getting the following errors (I removed few errors as I can post more than 10000 characters here)
[Code]...
View 3 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Jun 11, 2010
I installed a game (Shredder 11) using Wine on my Ubuntu system. The installation seemed to go well, including the directx part, but when I want to run the game, I can't find it anywhere. It's not in Applications -> Wine, it's not on Wine's C: drive, and I even tried a search "find / -name shredder", which came up empty. I tried to install it again, but according to the installation program it is already installed! (It asked me if I wanted to modify, repair, etc..).
View 6 Replies
View Related
Jan 4, 2011
I am trying to import some Python modules into Ubuntu 10.10 (PySCeS and PyDSTool). If I download the modules and extract them into a directoy in my home directory, open that directory in terminal, and then import them into python (>>>import module_x) then it loads fine. However, if I am outside of the directories then it always returns an error saying the module is not found. I have tried putting the modules into usr/local/lib/python2.6/site-packages or dist-packages and usr/shared/pyshared etc but it never sees any of my modules. It also does this with modules installed from the repository. They are always "not found" but if placed manually in the working directory they are.
View 2 Replies
View Related
Nov 17, 2010
I have fedora 11 (64 bit).i was trying install eldk.so i installed arm-2008-11-24.
After installation when i go for make command it shows error like /opt/edlk/usr/bin/arm-linux-gcc: Command not found details:
View 2 Replies
View Related
May 20, 2010
I am trying to building freeradius from source, but I get an error that python.h is not found ? !
checking for python2.3... python2.3
checking for Python.h... no
checking for Py_Initialize in -lpython2.3... no
But both python and python-dev are installed ?
[Code].....
View 3 Replies
View Related
Jul 4, 2010
I am trying to Upgrade from Fedora 12 to Fedora 13 using Preupgrade. My system downloads the the Upgrade and tries to install it but returns a message "Root of the previous system not found". I would really like to fix this problem but dont know how.
View 1 Replies
View Related
Aug 24, 2010
I recently purchased a Dell Studio 14, with Windows 7 64-bit. It has the i5 processor, and 6GB of Ram, so I went with the 64-bit version of 10.04. I've never used the 64-bit version, but I've had Ubuntu since 6.10, so Iḿ pretty familiar with it.
The install goes fine, and the OS works perfectly. When I restart, everything is great, GRUB works fine, etc. The problem occours when I boot into Windows.
After restarting from Windows, the laptop powers up, then, where it would usually boot GRUB, I get this error:
Quote:
no module name found Aborted. Press any key to exit.
Then, after pressing any key:
Quote:
Broadcom UNDI PXE-2.1 v 12.2.0
Copyright (C) 2000-2009 Broadcom Corporation
Copyright (C) 1997-2000 Intel Corporation
All rights reserved.
[Code].....
View 9 Replies
View Related
Oct 27, 2010
in ubuntu 10.10, I have installed python 2.7. I would like to use apt-get to install packages to this version of python but I haven't been able to figure out howThings I have tried without success:changing the symlink at /usr/bin/python to point to /usr/bin/python2.7 - even after doing this apt-get still installs stuff to python2.6.Set up python2.7 as the primary alternative using update-alternatives - doesn't work
View 3 Replies
View Related
Mar 31, 2010
I'm trying to install che Naviagent for the EMC2 clariion SAN storage. The communication is through iSCSI. The Naviagent is actually installed but doesn't starts and what I get is: FATAL module sg not found. I've read about the fact that in this ubuntu distribution the sg is builtin in the kernel and is not a module.
View 1 Replies
View Related
