General :: How To Configure NTLM Auth For Apache
Feb 23, 2010I want to configure NTLM for my Apache webserver, so that it uses active directory login credentials.
Additional info : my listen port will be 82 (http://xxxx.com:82)
ADVERTISEMENT
General :: How To Set Up Sendmail To Use Exchange Server With Auth NTLM As Smart Relay?
Mar 7, 2011I have a CentOS 5 box that is a web server. When it generates emails, all emails should go out through our Exchange mail server.I believe our Exchange server requires NTLM authentication:
View 1 Replies View RelatedGeneral :: Configure NTLM Authentication In Firefox?
Apr 7, 2010Our IT department have NTLM deployed through the intranet servers.I've set network.automatic-ntlm-auth.trusted-uris value in Firefox on some of the Windows machines and that works fine.However setting it in Firefox on the Linux machines is not working.This doesn't surprise me at all, I've no notion of where Firefox on Linux is supposed to get the authentication details from.So how is this process supposed to work? what bits of config / infrastructure am I missing?
View 1 Replies View RelatedGeneral :: Configure Sshd To Connect ONLY With Public Key Auth?
Jan 12, 2010How i can configure sshd to connect ONLY with Public Key Auth?
currentStatus : If you have no key. then you can log in with your password.
General :: Configure Ssh To Stop Requiring Public/private Key Auth?
Dec 29, 2009I configured ssh on one of my servers to require public/private key authentication and deny access to login requests not using a public/private key. Now I need to unconfigure that,but I can't remember how I did it. I've looked through ssh_config and sshd_config, and nothing rings a bell. Googling only tells me how to enable public/private key authentication, not how to require it or stop requiring it.
View 2 Replies View RelatedServer :: Use Git Auth By Ldap And Apache 2.2 On CentOS 5.5?
Dec 28, 2010operating system: CentOS 5.5 git version:1.7.3.4 ldap server:OpenLdap Http server:Apache 2.2 the software above have been installed. How to config /etc/httpd/conf.d/gitweb.conf file to let git authed by ldap?
View 2 Replies View RelatedUbuntu :: Auth.log CRON - Receiving In My Auth.log File
Jan 10, 2011Lately I have been receiving this in my auth.log file. It seems to be repeating over and over, and I didn't know if was anything normal or something I should be worried about...
Code:
General :: How To Configure Apache Server
Jan 12, 2011I want to configure Apache server in Red Hat advance server i make a web page in html foam
View 9 Replies View RelatedGeneral :: Configure Apache To Use Https Instead Of Http For Some Requests?
Mar 7, 2011For some of the files that I share using Apache, I want to make sure that they are served ONLY via https.
How can I configure this for Apache?
General :: Configure Apache To Redirect Request To Another Port ?
Aug 11, 2011*Am trying to configure on machine ?MyServer.net? apache on port 8586. *Two applications run on same machine on different ports Jenkins on 8081 and Hudson on 8080.*Request coming to 8586 port should redirect to either 8080 or 8081 on one condition. *The request from client machine coming to MyServernet:8586 looks something like this ?MyServer.net/job/<JOBNAME>/build?token=TOKEN?.
Condition
If <JOBNAME> is ?naveen? apache should redirect to 8081.
If <JOBNAME> is not ?naveenn? apache should redirect to 8080.
[code]...
General :: Get Configure Line That Was Used To Build An Apache Installation From Source
Feb 1, 2010Is there any way to get the configure line that was used to build an Apache installation from source.
I compiled Apache 2.2.14 a while ago on Ubuntu and I can't remember the ./configure line I used to build it. Is there any way I can retrieve it?
General :: Configure Apache To Show Error Message In Browser
Jan 31, 2011How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View RelatedGeneral :: Configure An Apache Server Step By Step?
Feb 7, 2010i am using rhel5. can anybody tell how to configure an apache server step by step
View 1 Replies View RelatedGeneral :: How To Rotate Auth.log
Mar 2, 2010I have a problem with the logrotate of auth.log, it is not working. I tried using 'kill -HUP `cat /var/run/sshd.pid`'. This restarts sshd but does not create a new auth.log. Also tried "/etc/etc/init.d/ssh restart" and "/etc/init.d/ssh reload"
View 3 Replies View RelatedUbuntu :: 9.10 - Configure FTP In Apache
Jun 7, 2010I'm running Ubuntu 9.10 in VirtualBox (OS X host) with Apache 2.1.12. I am developing in NetBeans on OS X and would like to FTP my code to Ubuntu to test on Apache. However, I'm not sure how to install mod_ftp in Apache on Ubuntu.
View 2 Replies View RelatedServer :: How To Configure Apache (2.2.11) With SSL
May 13, 2009I am making a webserver running apache2.2.11. The webserver is running fine. I didn't configure/enabling apache with ssl when compiling. So how do I get my webserver to run the SSL? As far as I now apache2.2.11 i does not require to download mod_ssl and openssl, to have the webserver run SSL, But I should have something like this:
# /configure --prefix=/usr/local/apache --with-ssl=/usr/bin
When configuring. Is there a way I can enable it now and do I need to install something before enabing it? Or can I just redo this:
# /configure --prefix=/usr/local/apache --enable-ssl
And then rewrite the old version I have with no problems?
Software :: How To Configure Apache With SSL
Aug 30, 2010I've a task to configure an apache 2.2 with ssl.
View 1 Replies View RelatedProgramming :: NTLM Authentication PHP?
May 20, 2010I'm writing some php code and part of it sending an email through smtp server, I used Mail.php from pear but unfortunately I didn't work since the smtp server is using NTLM authentication.Any alternates to Mail.php could solve this problem?
View 1 Replies View RelatedGeneral :: Wireless Disconnects And Cant Re-auth On Fedora 13 X64?
Jun 24, 2010I'm currently using Fedora 13 x64 and have noticed a strange problem with my wireless.
At random intervals it will disconnect, be it 5 minutes or 3 hours and then it will not re-auth no matter how long I leave it. The wireless is running WPA/WPA2, With TKIP/AES encryption. The router only supports b/g and the Wireless NIC is only b/g.
Not sure what driver/software it is using. I noticed I do have wpa_supplicant installed but there doesnt seems to be much happening in /etc/wpa_supplicant/wpa_supplicant.conf apart from the below.
Code:
[daniel@Enterprise ~]$ su -c 'cat /etc/wpa_supplicant/wpa_supplicant.conf'
Password:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
[Code]....
Red Hat / Fedora :: Configure Apache For 16 GB Server?
Oct 25, 2010I need to configure Apache for a 16 GB Server for maximum performance. It should have maximum requests and also with stand load. I have given the current configuration below.
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
[code]...
Software :: Configure CHROOT For Apache 2.2.15 ?
May 27, 2010I need to configure CHROOT for Apache 2.2.15.
I have a LAMP stack on my RHEL 5.0 box. LAMP Stack details (if required) are :
Code:
I have a rough idea that this can be done by mod_chroot somehow.
Any idea which version of mod_chroot to use and how ?
This is my /usr/local/apache/conf/httpd.conf
Code:
CentOS 5 :: How To Install And Configure Apache-Ant
Feb 10, 2010how can i install and configure Apache-Ant .
View 1 Replies View RelatedCentOS 5 Server :: Configure SVN In 5 Without Apache
Sep 23, 2010I'M trying to configure SVN in CentOS 5 without Apache, the connection should be possible with some SVNClient like tortoisesvn or another.
Following this guide i proceeded:
yum install subversion
useradd -d /home/svnroot -c subversion svn
passwd svn
svnadmin create /home/svnroot/proyecto_1
pico /etc/csf/csf.conf (enabled ports and restart with csf -r)
[Code].....
how to connect to the repository from my PC?
I don't know how to do it
I understand that this svn are running with svnserve but i don't know the way to connect from my PC with a svnclient, like rapidsvn or another.
General :: Bash Scripting Auth Check For Pop3?
Mar 30, 2010I need to make a bash scripting, based on a password and a user,that connect to pop3 server and see if it login,if you can,return ok, otherwise return ERR .
View 10 Replies View RelatedSoftware :: LDAP Or NTLM And SQL For Authenication?
Sep 23, 2010I have a problem I hope someone here can give me some guidance on. I have been looking for ways to do this and so far have come up short. My need is to keep logs of usage of several copiers for billing purposes. The copiers have a built in account code system, with a 999 code limit and will keep the counts, however we have about 12,000 active accounts. Not every account will have usage every month and not every copier needs every account. The last thing I want to have to do is manually update the copier account information every day.
The copiers can authenticate against NTLM (v1 and v2) and "Active Directory" I am told they will happily access LDAP or e-Directory (we are a Novell shop). I dont' want to authenticate users, I want to authenticate "Accounts". I have a MS SQL database that has the "Account information" and my thought was to set up a way to have an LDAP server access the M$ SQL DB (probably a view) to get authentication for the copier to allow the prints and keep the counts. Which I can then import weekly into the accounting system.
So the question is has anyone ever done something like this? Anyone have any idea how best to go about accomplishing this? I guess I could set up an LDAP server separately for the purpose, but it seems I should be able to consolidate things more than that, so that if the account is "Active" it is Authenticated to the copiers If this works well, I will be probably be moving to moving to phone authentication next.
Programming :: Debug The NTLM LWP Module ?
Nov 11, 2010I'm trying to debug the NTLM LWP module.
I added use LWP:ebug qw(+); to the top of my script, but I can't see any change.
I'm on Windows if that makes a difference (installed activeperl).
I know there are probably a million reasons why something perl won't work, but can anyone help me get debug logging showing up?
Fedora :: Apache - Configure The Virual Server
Oct 9, 2009I have apatchi (httpd) installed on Fedora, and I am trying to configure the virual server. I have two websites: [URL] and [URL] and the machine has one public IP address. The problem that:
It always returning the default virual host (even if we typed in the url: [URL] or [URL]), it returns the default configured one (which is the first configured virual host). I have one public address on my machine, and my configuration as following:
[Code]....
Actually [URL] is the one which is used for the global configuration.
OpenSUSE :: Using Yast2 GUI Interface To Configure Apache
Nov 20, 2010I'm using the yast2 gui interface to configure apache. I think its called yast2_http_server. I added one website with *:80 set as the virtualhost ID. When I go to add a second website with the same thing, it errors out with: The IP address is already configured on another virtual host: *:80/mydomain.com. I have another opensuse box with many websites in apache configured this way.
View 1 Replies View RelatedOpenSUSE Network :: Configure A Webserver In Apache 11.3?
Mar 5, 2011I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
[Code]...
Ubuntu Servers :: How To Configure Component Of Apache
Mar 3, 2011The web server component of Apache isn't actually called "Apache" right? It is called something else? I didn't realize there were so many parts. Also, is there a good newbie introduction to how to configure it for a basic web server?
View 5 Replies View Related
