General :: How To Backup / Home?
Oct 6, 2009How do I backup my /home before the new version of Ubuntu comes out later this month. I am running Ubuntu 9.04 I really do not want to have to redownload my themes and everything.
View 3 RepliesHow do I backup my /home before the new version of Ubuntu comes out later this month. I am running Ubuntu 9.04 I really do not want to have to redownload my themes and everything.
View 3 Repliesusing Back In Time to backup my home directory to a second hdd that is mounted at /media/backupThe trouble is, I can do this using Back In Time (Root), but not using Back In Time without the root option. This is definitely a permissions issue - it can't write to the folder, but when I checked by right clicking on the backup directory and looking at the permission tab, it said I was the owner
View 2 Replies View RelatedI've tried to google but not much luck. What I would like to do is have anumber of folders on my desktop and their contents, replicated/duplicated into another folder on the same PC in real time. So for example, if I were to change an OpenOffice document in a specific folder on my Desktop it would be replicated/duplicated in real time. If I had three folders on my Desktop A, B and C they would also appear/be backed up (in real time) in a folder called /home/backup. Can this be done?
View 3 Replies View RelatedI need to backup my /home directory because I want to switch from Fedora to OpenSUSE but I didn't put /home as a separate partition so I need to back it up. Problem is, I can't figure out how.I've tried tar and gzip through every google hit I can possibly find but not one has worked.
View 7 Replies View RelatedI would like to have dump backup just my home directory but am having problems the command I am using wants to back every thing and takes hours upon hours it has been running for about 10 hr and only 21% is done. This is the command dump -0u -f dp_hd /media/CENTON USB/ /how can I get this to back up only my home directory
View 7 Replies View RelatedI am looking for a piece of hardware that would be able to run Linux and act as a web, subversion and file server. Ideally it shouldn't have any fans, because it will be in the middle of my living room, the computing power needs are minimal. I would be grateful for recommendations.
View 2 Replies View Relatedrecently i made a backup of my home directory in 10.10 before reinstalling 10.10. again.This time I chose to manually define the partitions (50GB Root, 25GB Swap, 325GB Home)Now i wish to migrate the old home into the newly installed home, which is on a separate partition.I have found the following documentation URL...Still, as a beginner I am not quite sure about the necessary steps to perform.As the new home is located on a separate partition is it possible to simple delete all directories there and copy all directories from old home to new home with rsync?
Do I have to install all the software that corresponds to the old home first followed by migrating home or first migrating home followed by installing the software such as thunderbird, Texlive2010 etc.Guess that migration should take place at a later stage. Otherwise my old profile files from firefox and thunderbird will be overwriten by new ones?
I have a a software "Acronis True Image Home".Is it possible to backup CentOS Linux?on Windows do I need to create a bootdisk from Acronis and then boot it up on linux server?I wanted to copy all the files from Server to External USB Hard Drive or via FTP
View 4 Replies View RelatedI am using rhel5 running as samba PDC.Most of the user save their data on a common folder on the server.Now I want to backup this data to some other location to have redundancy.It could be external USB HDD or other folder on the same server.How to create backup script and automate it using cron.
View 1 Replies View RelatedSo I've finally given up on saving my kubuntu install that wont boot. I've searched, and looked, but couldn't find a thing.My delema now is to make sure that I:
a) get all of the user data safely packed up onto my external USB drive. I believe it's all in the home directory. I'm not sure about getting hidden files though...
b) get the new install to go smoothly, and not mess up grub or the parralell XP install on the same hard drive.
c) get the user data back on the computer and recreate the user structure. Permissions were messed up already, so setting those up again is not an issue.
So, I've been poking around, and this is how I think things should go:
a) tar cvpjf backup.tar.bz2 /home to get my home directory backed up. Not exactly sure how to get from here to my external hd, but I'm sure I can figure it out
b) just run a live cd of kubuntu, delete the old partitions, and reinstall over them?
c) unzip the tar into by /home directory.
That's all I've been able to find so far. How do I set up the users? Will they show up as soon as I untar? Will the resinstall play nice with my windows install? Will I get all the hidden files too? Is there anything I'm missing?
I have a Dell laptop with dual-boot Vista-Ubuntu. I never ever used Vista and am not planning to.I'd like to move from 9.04 to 10.04. I know how to backup and run an update already. But for the sake of simplicity, i'd prefer to erase the data of the current Vista-partition and use it as my /home content.It makes more sense to me, so i don't have to make a backup of everything for ever again and again when installing or updating my OS.
View 9 Replies View RelatedI want to backup all the data in my /home folder/partition (before upgrading).
1. In How to migrate to a new openSUSE version - openSUSE it is only written how to backup *one* users data.
If you know the path to your external harddisk, just open a konsole and do:
Code:
$ su
1. cd /home
2. cp -b -vvv username_to_be_backed_up /media/<folder_of_your_external_harddisk>
How can I backup *all* users' data in one folder "home-double"?
2. Has the external disk have to have any special file system?
I have an 500 GB disk in fat with some data already on it. Can this be used? Or do I have to make an new (ext3?) partition on my external hard disk to preserve permissions? Do I have to worry about big files under FAT?
3. Should I make anything to get sure that all data is the same in "home-double" as in "/home"?
Now I am using (on my Samsung X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
I'm recently switched my work laptop from running winXP to runing karmic. I'm still at the stage of getting my various bits and bobs working correctly. One of these I (may) have a problem with is backup's. I've ran backuppc on a ubuntu 9.04 box in the attic for the last year or so and I've been backing up my laptop to that. But since the switch, since I have an encrypted home dir, what is being backed up is the encrypted files. First, can I recover these if needed (I kept a copy of my passphrase), or can I get backuppc to ssh in as me with my home dir mounted correctly?
Backuppc is using rsync over ssh I've been using linux on and off since about redhat 5.0, so I'm not afraid of the command line or vi
I have a really quick question-I would like to set up some type of scheduled event to back up my entire /home folder to a USB drive.I know about all of the various programs such as simple backup, etc. and have used them before. As far as I know, these programs cant do what Im trying to do.Does anyone know what I could use to back up my files at a specific time to a specific USB device?Preferably, I would like to just have a simple
Code:
sudo cp /home /media/Cruzer
run every night at, say, 2am.
[code]....
I'm hoping somebody can find something here that I haven't. I'm trying to use rsync to backup home directories to a nas. First, I NFS mounted the nas and ran an rsync and everything worked out fine. the transfer completed after a few hours and everyting was transferred (lots of stuff!). I then decided that I don't want to leave the nas mounted all the time and I didn't want to automate mounting and unmounting of the nas as I didn't think I could produce a script that would work reliably enough. So I decided to start an rsync daemon on the nas and upgrade via that. I run the following command (results are included. the ^C is me killing it after it hangs).
Code:
ryan@server:/etc/backup$ sudo rsync -ax --stats --progress --delete /data root@192.168.0.98:backups1
root@192.168.0.98's password:
sending incremental file list
data/home/user/Documents/
data/home/user/Documents/The File.wmv
[Code]...
I am pretty new to using Ubuntu and want to find a way that I can backup files remotely to my Ubuntu box. My Ubuntu box is running at work and I want to backup files from home automatically every night.Also which solution encrypts the data en route? For example a server with multiple clients with different directory paths.
View 4 Replies View RelatedI have installed rsnapshot from slackbuilds.How to run it to backup home directory?I'm also reading the official docs.
View 3 Replies View RelatedBefore I reinstalled Ubuntu (this time allocating the entire disk to it as I never really used Windows any more) I backed up the entire contents of my /home folder using Deja Dup. Now that I am done reinstalling Ubuntu I am trying to restore the backup. However, when it actually begins restoring the backup, it says "Restore failed: failed with an unknown error".
View 9 Replies View RelatedI went ahead and created this directory
mkdir /tmp/rsync-backup
and, ran this
rsync av /home /tmp/rsync-backup
this is the result
rsync: link_stat "/av" failed: No such file or directory (2)
skipping directory home
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1060) [sender=3.0.7]
Through the Black Friday shuffle of getting new hardware, I now have a 500TB external drive, a 1TB external drive, and an old computer I want to set up as a home server. My family has a lot of photos that are currently stored on many different computers and are not backed up, I want 500gb of space for photos, and for those photos to be backed up. That would leave the other half of the 1TB drive for assorted things like personal backups, and general file storage. I know enough how to set up Ubuntu server edition on the computer, but the options on how I can set up the storage is stumping me.
To Recap, I have 1.5TB of storage total split 1TB/500GB. I want 500GB to be used for a central storage for the 10+ computers in my house(mostly using Windows) and that 500GB would be automatically backed up. The 500GB that's left would be used for non critical files, and wouldn't be backed up.
What is the best way of backing up the files? (script once a day that copies files? Some backup program?)
Would the 500gb drive be best for backing up to(having the 1TB be where people would put the pictures) or the other way around? Does it really matter?
Any tips on the cleanest way to have this work cleanly with Windows, Linux, and Mac? How well do photo programs(Picasa, Shotwell, iPhoto) like a setup like this? Is it possible to have different programs on different machines all reference the same file system without their automatic sorting(to folders, usually by date) messing each other up?
I would like to make a backup of my /home directory onto a NAS device, and have whatever software is used for the purpose update (new and changed files) every night, or perhaps everytime there is a period of inactivity. Any suggestions for a GUI package that will do this?
I do not want a complete backup each time, just the new or changed files. Also prefer software that backs up to a mirror of the original (i.e., uncompressed folders and files)
I have a mount called on /home for /dev/sda12..I want to mount /dev/sda12 onto /backup..I tried to do this by changing things in the fstab file i.e. i replaced /home with /backup. This change caused boot up problems and I had to change my fstab file back to get going again.
View 2 Replies View RelatedI installed a second HD, and formatted it to ext4. I gave it the "/backup" label. I am trying to figure out how to mount it so that I can run cron to backup my home folder onto it once a week. This is what the fstab looks like now
[code]...
I have read that i can backup the entire system with the home folder with commands, or with programs, such as clonezilla, but it doesnt work, so im trying to back it up with commands now but i cant find a good tutorial to explain what commands to use.
View 9 Replies View RelatedI have spent some time testing out different backup solutions for my small home office during the last weeks, but still haven't found anything that have been working out too well yet. We can definitely work with a non-GUI script if that's what it takes, if only the requirements are fulfilled:
- Upload to Amazon S3 Europe. We get unbelievable slow uploading speed to US, so uploading 400+ GB of data will not be happening anytime this year...
- Incremental backups - only changed files shall be uploaded or we will have a big bill from Amazon in the end of each month..
- Files should not be uploaded in one big per-folder archive. This is not efficient at all, since if we change one file in a subfolder, a huge two-digit GB sized file would have to be uploaded during next backup. Not good for economy again, or traffic overhead on our internet connection.
I am looking for the best solution for backup, I want to backup the /home/user.I know about rdiff, and rsync but is there a better solution for backup these folder.And the security must be good, The backup I want to make is from a server to a server in a datacenter.Both servers are running on UBUNTU 9.10.
View 6 Replies View RelatedI would like to attempt creating a cron job to backup my root (/dev/sda1) & home (/dev/sda3) partitions to an external USB drive.I have been using Clonezilla to make image backups but, I have to physically do it, when I remember or have the time. I have never created a cron job, and worse, I have never created a .sh file which, I think, is what I need to do.
View 12 Replies View RelatedI'm trying to setup a server at home, it has some practical implications, but largely it is just to take a stab at it. But I need the help of someone with more experience than I in defining exactly what I'm looking to do.
Here's what I have: old PC running Gutsy server connected to router. Several laptops at home connected via wifi to router. All laptops running either Windows or Ubuntu. Here's what I'm looking for: The server centralizes file storage for all clients. I would likely incorporate a RAID and some synchronised imaging of the files. I also want the server to create disk images of the clients hdd, regardless of client OS.There would also be some shares that would be publicly accessible (myself and friends accross the country would be able to access the same drive).
So I was thinking something like what corporate environment would be nice, you log into a profile that exists on the server. Like a dumb client...all data would be stored on the server. But I'm thinking that's more like a network boot and wouldn't work via wifi (or would it?). Also that wouldn't lend itself well to laptops used on the road in areas without net access. now I'm thinking each client would have its own locally installed OS, and they would just access networked shares. I could store sensitive files on the shares, but that wouldn't provide complete backup solution for each client.
Without rambling on anymore, anyone care to throw out some ideas? I'm really just looking to see if I can do what I want. The focus is on centrallizing files, securley backing up data and client OS's and ability to restore said images quickly.
I am trying to create a backup script that will back up a single folder for a class i am in. I was wandering if I could get some help. If possible I would also like to know how to write a script that can encrypt that same file . I will be putting the back up in my /home/usr/Backup directory. I am not trying to back up my whole system just a single folder. I am using Fedora 11
View 2 Replies View RelatedI'm just setting up a partition on a seperate HDD in my system. I plan to use the partition to backup the important files on my main HDD (to guard against HD crash).
The question I have is about where would be the typical location to auto mount this partition? Which would it be normal to go for:
1. /backup/
2. /media/backup/
3. /mnt/backup/
4. /home/chris/backup/