General :: Fedora File Permissions Not Taking Effect?
Jun 27, 2011
I have a directory /models/ with the permissions
drw-rw-rw- 2 owner developers 4096 Jun 24 15:13 models
these were set with
sudo chmod -R 0666 *
My user has developers as the primary group (the same group as the file), but I cannot access the directory via the terminal or ftp.
[myUser@machine]$ id myUser
uid=503(myUser) gid=505(developers) groups=505(developers)
$ cd models
-bash: cd: models: Permission denied
I had the same problem before the directory belonged to my group, and I even went so far as to restart the server, without any luck. How do I set permissions to this directory so that I and other members of the group developers can access it?
View 3 Replies
ADVERTISEMENT
May 29, 2010
i have changed the cachedir for yum because i don't have enough space left for updates (500MB free on /). i got the "Insufficient space in download directory" error msg.so i've changed the chachedir in /etc/yum.conf like this:cachedir=/media/OS/.temp/var/cache/yum/$basearch/$releaseveros is another partition on my hdd with 17GB free spacewhen i tried to update after this i got the error msg again"Insufficient space in download directory /media/OS/.temp/var/cache/yum/i386/12/updates/packages"it seems like yum is still using /var/cache for downloading and not /media/os/.tempi have double checked with df and yum it's still using /var/cache
View 14 Replies
View Related
Dec 28, 2009
I have 2 Oracle users that generate .tmp files under /var/tmp. By default, the files have the permissions 644. Now, a need has arisen whereby the files created by these users have to have the permission bits as 664. Obviously, I changed the UMASK value for these users from 022 to 02. But the files are still getting created with 644 as the permission.
I tried restarting the application as I read that a relogin is required for the UMASK change to take effect. Even that hasn't helped.
View 3 Replies
View Related
Aug 9, 2009
My system (CentOs5.3) became erratic after i tried to change wholesale the ownership of the /FS. is it possible to change ownership or rwx permissions of files in linux? what is the safeguard available to preserve the consistency of the program files in linux against such an attempt by su?
View 2 Replies
View Related
Aug 3, 2010
I have a script which lists all the SID listed in /etc/oratab and then after the user select which SID to set, it calls another script to set the SID and other environment variables.
The script runs just fine and does all that is expected, but the variables are not set permanently, can't figure out why. Everything works fine when I run the setsid.sh out of this script.
Here is the script:
View 9 Replies
View Related
Jun 23, 2011
How to enable wooby effect (compiz desktop effect like ubuntu) in fedora 15.
View 1 Replies
View Related
May 7, 2010
I have upgraded to 10.4 and and after try to install mac look in ubuntu.My screen start flickering, I found it this due to in system => preference => appearance => effect become no effect automatically (as each and every time I select extra effect)After some time.for changing this setting i need to turn off the computer and restart then after i can do it i.e. change effect to extra effect. Its done after following installation
[URL]
View 4 Replies
View Related
Apr 6, 2010
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
View 2 Replies
View Related
Oct 16, 2010
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies
View Related
Oct 16, 2010
i got driver and when i install driver and reboot computer I got just terminal and when I type startx I get error FLGRX and sam log file or something like that.
instruction i found here but some comands didn't worked openSUSE Lizards
View 9 Replies
View Related
Jul 28, 2011
I have a web server set up, and for a while I just let it show the default "test" page, but now I am wanting to actually show something of my own.
I downloaded a couple templates from the internet (free ones), and copied the first one to the /var/www/html folder (including subfolders for ./images and such), and it used an index.php file, but when viewing in my browser, it showed the actual text of the file, not the graphics and images and stuff.
So I deleted those files and "installed" the second template, which uses an index.html file instead.
I am once again getting the default "Apache is running but not configured" page again, even though I have verified multiple times that the index.html file is located in /var/www/html
if I include the index.html file in the path to my website, I get a 403 Forbidden, so I'm thinking it has to do with file ownership or permissions.
I placed the files there as "root", and have tried several combinations of possible permissions (root:root is the owner:group) without any luck.
View 5 Replies
View Related
Jan 29, 2010
How can I unzip file/folder in a way that it sets permissions of my choice to the unzipped contents instead of setting them for root:root?
View 2 Replies
View Related
Sep 17, 2009
I am trying to automate ftp to transfer files from windows to Linux server automatically and my script looks like this .
@echo off
SET CUSTOM=/apps12i/oracle/KIRAN/apps/apps_st/appl/custom/12.0.0/reports/US
echo user oracle> ftpcmd.dat
[code]....
Any files we transfer through ftp from windows , their default permissions to be set 755 automatically . We are using Red Hat Enterprise Linux AS release 4 (Nahant Update 7) .
View 1 Replies
View Related
Nov 4, 2009
copying permissions from one file to another.I know that command for changing permission is "chmod", for example chmod 666 filename However, I have one file filename1 and by listing all contents of a directory with ls -al I can find out its permissions in form -rwwx and similar. Now I want to define exact same permissions to other file "filename2". How to use chmod command to accomplish this. Other way around would be to simply copy permissions from one file to another. Is there any command for this purpose?
View 3 Replies
View Related
Jan 4, 2011
I had created a file under a directory & set the permissions through chmod command but when I create another file under this directory, I get the default permissions. Is this due to umask or can I set the file permissions through chmod under a directory.
View 5 Replies
View Related
May 14, 2010
Does anyone know why files in /boot are world-readable (particularly the initial ram disk)? I'm not an expert, but I would not expect anyone except root or a sudoer to have the ability to read these files.
View 5 Replies
View Related
Feb 12, 2009
this directory has permissions 750 and is owned by user1 and group user1 I have an admin user that is primarily a part of group admin, but also a part of group user1 what would stop admin from having read and execute permissions on this directory? I'm running clamav and have a clamd daemon running as user admin (I could run it as any user, and I may make a special user later, but I don't want to run it as user1, user2, etc).
I have 2 (technically lots more, but let's just say 2 for now) users, user1 and user2 that have home directories /home/user1 and /home/user2. each is owned and group owned by user1:user1 and user2:user2 respectively with permissions of 750. my admin user is part of groups admin, user1, and user2 I need this to be able to scan my user's directories using the command (is this correct?):
clamdscan --move=/files/quarantine/ --config-file=/etc/clamd.d/adm.conf /home/user1/file
doing this gives the error:
/home/user1/file: lstat() failed. ERROR
If I change the directory permissions to 755, it works fine.Or if I leave the permissions 750 and change the directory group ownership to admin, it works fine. So, why would this be? Obviously it is a permissions issue, but why is it not reading admin as part of the user1 group and allowing the same permissions as it does when making the directory group-owned by admin?
View 7 Replies
View Related
Nov 4, 2009
I'm using my Linux (SLES 10) server as a File Server at this point. I need to set File Permissions to nested folders differently to different groups. For example:
homesharedengineering* should be read only for groupA
homesharedengineeringadmin should be read & write for groupB Plus read only for groupA
homesharedengineeringautocad should be read & write for groupC Plus read only for groupA
I've been using Webmin and Putty to set permissions but Putty only allows me the Default Group, it won't allow me to set several groups on the same directory. Webmin seems to allow me to add multiple groups (Webmin --> Others --> File Manager --> Info & ACL tab will provide extended abilities) but when I add multiple groups, they don't seem to take effect? I'm wondering if my setup at the 'Share' level or at the hierarchy of my folder structure (unix based) needs to be set specifically?
View 1 Replies
View Related
Apr 5, 2011
I keep creating practice perl scripts in a linux directory using vi <filename> and need to chmod 751 <filename> before I can run it as I wish to. I'm sure there is a simple way to default my permissions or config them at creation, but I'm not familiar with it ayuda me por favor.
View 2 Replies
View Related
Jun 27, 2011
Let's say you have this structure:
+ directory
-- file1
-- file2
-- file3 -> /tmp/file3
file3 is a link to another file3 somewhere else on the system.
Now let's say I chmod 777 the directory and all contents inside it. Does my file3 in /tmp receive those permissions? Also, let's say we have the same situation but reversed.
/tmp/file3 -> /directory/file3
If I apply the permissions on the file being linked to, how does that effect the link?
View 2 Replies
View Related
Mar 29, 2010
Under debian i did this:
casey@t400:~/programs$ ls -l
-rw-rw-r-- 1 root root 2071 2010-03-28 05:15 urlgetter.cpp
Then
casey@t400:~/programs$ gedit urlgetter.cpp
and upon attempting to save the file, I get the error
"Could not save[...] You do not have the permissions necessary to save the file."
but I am a member of the group root:
casey@t400:~/programs$ cat /etc/group | grep root
root:x:0:casey
View 2 Replies
View Related
Sep 15, 2010
Is it possible to let users create the directory or files but only user "yat" can delete them.suppose other users are geller ross joe from group FH , who have privileges. whenever these users create file or dir , they should not able delete it.BottomLine: Group users should create file but should not be able to delete them.By the way using sgid bit didnt help .
View 14 Replies
View Related
Dec 17, 2010
Kernel 2.6.21.5, slackware 12.0 For a given app run by me as user john to be able to create a file in /foo1/foo2/, what do I need? (a) john to have write permissions in /foo1/? (b) john to have write permissions in /foo1/foo2/? (c) john to have write permissions in both /foo1/ and /foo1/foo2/? Any hint will be welcome. Note: No. It's not homework. KTorrent complains when trying to create the files being downloaded, saying 'permission denied'. But I think he is being run by another user. I can explain in a different thread.
View 3 Replies
View Related
Oct 17, 2009
I'm studying Linux and just started reading about permissions and ownership. My question is how would you have multiple users or groups given access to a certain directory? When doing an ls -l I see the owner, group and others that have permissions that have access to the file or directory. But what if I need multiple different groups access to a particular file or directory all with different permissions?
View 2 Replies
View Related
Jan 4, 2010
I first installed linux as ubuntu version 9.04 straight off of a Computer Active CD and liked it so started to delve into file permissions and authorisations, simple stuff I suppose just so I could feel my way around things for a while. Using the built in Ubuntu software centre I downloaded and installed a prog which handles authorisations and I found that very helpful but then through the update manager I installed the latest distribution update (9.10) and now find that the authorisation software only lists a couple of things that I can get to and consequently every time I mount one of my hard disks I'm asked for my admin password even though I am logged in as administrator which is a hassle,
a small one but there all the same, as a newbie I realise it must be me not understanding something but I just dont know what, also in the previous version right clicking on the logging out panel gave you an option to remove the 60 second shutdown or restart delay and that has disappeared in the new version, again its really only just a nuisance thing but I find that sorting out this sort of thing will help me to understand the system
View 5 Replies
View Related
Jun 6, 2011
I am having problems with groups and file permissions. I have a file owned by myself
Code:
-rw-rw-r-- 1 diblemar users 2.1K Jun 3 06:02 /cluster/shared/Injects/1404_1405_1000033606_79964.return.xml
I want to modify the file using a cgi script running on an apache server (on the same machine). Both diblemar and apache are in the same group.
Code:
apache:x:48:diblemar
However, I receive a file permissions error when I try to modify the file. I assumed that with the permission settings above apache would be able to modify a file owned by someone else in the apache group.
View 5 Replies
View Related
Nov 29, 2009
I've been installing/tweaking F12, and I've found something that I can't say I've ever seen or expected to find before: the contents of my ~/Documents folder has lost its permissions and ownership info. I restored it from a backup last night/this morning, and I've rebooted a few times since then. Other folders from the backup are OK, just Documents.I don't know what my options are. I could try to blow it away and restore it, but that doesn't answer what caused it. If there's a "relabel" or something, that might help... though I've never had to do it before. Could it be that after these two-and-some-change years, my hard drive is giving out? Good thing I have a recent backup... but it'd be a shame to lose all my work getting F12 to work again.
View 4 Replies
View Related
May 16, 2010
I recently made the dumb mistake of using tar to make a backup of my "/" on my "/" when my "/" didn't have near enough space to store the backup. I received a warning message, so I canceled the terminal process and used nautilus to delete what amount of the backup had already been saved. That didn't seem to free up any space on my "/" like it should have, though. In an effort to find any hidden trash files that needed to be deleted, I used this terminal command:
[Code]...
View 9 Replies
View Related
Oct 18, 2010
and how to list all files in a directory including full path, owner, group and permissions for each file
View 3 Replies
View Related
Dec 4, 2010
I have a web application which calls scripts on the linux box it's deployed on. Currently, there are some file permission issues which prevent the scripts from running properly. How can I give my web application the needed permissions? I thought of creating a user 'group' , assigning my web app to that group, and changing the ownership of the script files to the new group. Unfortunately, I'm having trouble with the following: What user id does my web app have? If my web app does not have an user id,
View 3 Replies
View Related
