Installed FC-8 (DVD) on old dell 866mhez desktop years ago; works like a champ. Inherited dimension 2400, used same DVD. No errors loading (std config). Reboot and linux starts. Gets to 'Set clock - ok' and hangs on 'starting UDev'
Celeron 2.4G
bus speed 400M
L2 cache 128kb
384 DDR SDRAM
FC-8 2.6.23.1-42 on the DVD.
I know FC-12 is out, but with older HW, trying to stay compatible.
I have done a fresh text-only installation of Fedora 10 on a Dell Dimension E521 for the purpose of setting up a server. After installation I ran yum update to bring the system up to date. After the update, I rebooted the computer, but the boot process froze. I recycled power and pressed "I" after the Dell BIOS screen and the GRUB bootloader appeared. I selected the most current version, edited the kernel line by deleting "rhgb quiet" and replacing it with "3." After making this change, I continued with the boot and the computer stopped at "Starting udev:" I have two fedora 10 revisions showing in the GRUB bootloader, the original installation and the update after running yum.
I repeatedly tried rebooting both versions and, after about 30 attempts, the computer finished booting and got me to the command prompt. Reading through the forums indicated there might be some issue with my nVidia GeForce 6150 onboard video and fedora 10. So, when I got to the command prompt, I followed the instructions in the forums [URL] to load the rpmfusion drivers. This appeared to be successful and when I looked at /etc/X11/xorg.conf it appeared to be correct for the new nVidia drivers. After loading these new drivers I tried rebooting. Unfortunately, I have been trying now over and over to get back to the command prompt, but simply can't get past "Starting udev."
I want to try the new 11.1. When I start the installation (x86_64 DVD), the startup is hanging. The last message is "Starting udev...". Keyboard is completely frozen, only reset button is working. Mobo is an Intel DG965WH with 4GB RAM and ATI Graphic card (ASUS1950pro). My opensuse 11.0 runs without any problems.
View 9 Replies View RelatedI'm trying to configure gpsd 2.96 to start automatically from udev rule on a Slack 13.37 box.1. I've compiled and installed gpsd from sources and made sure it starts manually.2. I've copied the /lib/udev/gpsd.hotplug and /lib/udev/gpsd.hotplug.wrapper scripts in their places from the source tree and made them executable.3. I've copied the gpsd.rules file from sources into /etc/udev/rules.d4. I renamed it 99-persistent-gpsd.rules to run late in the bootup process.5. I've copied the /etc/default/gpsd file from sources and made sure it has the right settings inside.
Now, for the results. If I plug the gps usb dongle in while the system runs, it starts gpsd if it is not started, and it connects to it just as it should. But if I start the system with the dongle in, gpsd doesn't get started during boot. I can't find any relevant message in /var/log/syslog or /var/log/messages for boot time. There is stuff there from when I plug the dongle in while the system is running though. It's like udev ignores the rules for it at boot time.Is there something in the Slackware boot scripts that would prevent running those scriptssd.hotplug.wrapper which in turn runs /lib/udev/gpsd.hotplug which is a Python script)?Here is the contents of 99-persistent-gpsd.rules (ignore the comments referring to Debian, it was meant for a Debian box). My usb gps adapter is the first one - the Prolific chipset one:
Code:
# udev rules for gpsd
# $Id: gpsd.rules 5861 2009-08-03 13:41:01Z bzed $
[code]....
Have just installed 5.4 64 bit on an AMD64 x2 system with 4 GB ram running ESXi4.Text based install went fine, but on reboot starting up it gets as far as 'Starting udev' and just hangs. Checking the performance in ESXi it appears to be using 100% cpu.I have left it for half an hour and it does not progress and the only thing to do is to power cycle the VM.I have searched and found a few suggestions for kernel parameters but they did not make any difference. I can't even get in to a command line as it doesn't boot up far enough.I have reinstalled it several times and also checked the MD5 of the downloaded file and all appears Ok.
View 2 Replies View Relatedmy fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.o/p of
Code:
dmesg | grep -i ata3
gives
[code]...
I have a Fedora 11 PC, which I want to connect to the ldap server at my organisation. When my /etc/ldap.conf file is in place, the machine will not boot past "starting system messagebus" and just hangs there. I have to press the reset button, and boot it into single user mode, and remove /etc/ldap.conf, and only then will it boot. The ldap.conf file is fine, I think, because if you boot the machine up without ldap.conf, then log in.
I can put ldap.conf in place and immediately I can see all the user accounts etc. from the ldap server. If I then reboot, with ldap.conf in place, it hangs on boot again. I found a bug report for FC5 which stated this problem, but there was no solution. There was a workaround, making messagebus starting later in the boot process (move it from S22 to S27 in rc3/5.d), but that didn't help in my case.
My ldap.conf contains this (I've removed my actual ldap info):
host my.server.ip.addr
base dc=my,dc=dn
uri ldap://ldap.mydomain.com
ssl no
tls_cacertdir /etc/openldap/cacerts
pam_password md5
bind_policy soft
As I say, I think the ldap config is fine, because you can start it manually once the machine has booted up without an ldap.conf in place. I lifted it from a Centos client, which works fine and doesn't have the same problem with booting that Fedora does.
Fedora 12 randomly crashes after a fresh install.Everything is left at its default during the installation except I install KDE and not Gnome.When I try to boot I hit esc at the splash screen to see where it hangs, but it never hangs at the same spot twice. Sometimes it hangs and sometimes it restarts. Its crashed everywhere from starting udev to the login screen.
I've been using kubuntu for the past year because I have the same problem with F10 and F11.
I dual boot with Windows 7 for games.
System specs:
Motherboard: MSI P45 Platinum
Processor: Intel Core 2 Duo E8500
Video Card: Radeon HD4850
Memory: 4GB (2x2GB) Patriot
HDD: Main: 250GB SATA Western Digital
code....
After choosing Ubuntu over Windows XP, I get an error:
Quote:
There is a problem with the configuration server. (/usr/lib/libconf2-4/gconf-sanity-check-2 exited with status 256)
I click close and get the sign in prompt. I click my user name and put in my password. I hit enter and I get another message:
Quote:
Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator.
That goes away, and then the first error comes up again. Then, I'm sent back to the sign in screen.
Is it possible to do an aptitude remove for all packages installed in, say, the past hour? I'm looking for an easy way to keep track of lots of installed packages without having to look through the logs and write them all down.
View 4 Replies View RelatedWhen booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View Relatedwhere the install hangs at the "Starting udev..." and nothing seems to be able to get the system to run the install. I have tried starting the install with edd=off, apci=off, noapic, apci=ht, and a variety of other options listed on posts. I have tried versions 11.0, 11.1, 11.2, and 10.2 with no success with any of these. With 10.2 it does not hard lock the system so I am able to Alt-F4 to see some debugging info and I am getting the following "it[1] trap divide error rip:2b6b0c281123 rsp:7fff9e95fdf0 error 0". With any of the version 11 installs the system completely hard locks with "Starting udev..." I have verified the installation media of all distros, re-downloaded the iso files, and burned using the slowest setting all with the same results. I have gone into the bios of my machine and disabled the APCIMCFG, High Precision Event Timer, SW Mem Hole Remap, and UnGanged Enabled. I have also tried to enable this IOMMU option for the memory but still nothing. I have tried using just one of the SATA drives by unplugging the other 5 and same results. I did notice that from time to time I see something from squashfs.ko saying "Clocksource tsc unstable"
View 3 Replies View RelatedI had installed openSuSE 11.0 and then installed XEN using 'Install hypervisor and Tools' which is present in Computer -> YaST -> Virtualization.
After that I rebooted the machine in XEN mode[Dom 0]. There I installed a Virtual machine[Dom U] with OpenSuSE 11.0 Operating system using the option 'Create Virtual machine'which is present in Computer -> YaST -> Virtualization.
VM[Virtual Machine] got installed successfully and started running in TightVNC. I shutdown the VM and restarted it and it started running successfully.
After that I shutdown XEN[Dom 0] and restarted the machine in XEN mode again to run Virtual machine[Dom U]. But this time I got the below error when I selected the 'Run' option in installed VM.
Traceback (most recent call last):
Last night, I formatted my laptop(Asus w5f). And I installed win7 Home Premium. Then I installed Ubuntu 10.04. After installation, I restarted the computer. When I choose win7 at grub, comp. restarted itself. But When I choose Ubuntu, started properly. Now, grub is not starting win7. At ubuntu, I can see windows disk and files. But win7 doesn't start.
View 2 Replies View RelatedI have matlab installed on a network (I am not the administrator) and we usually start the program by typing "matlab", then choosing one of the version options from the menu i.e. typing "n". So because of this, trying to run matlab programs or commands directly like this... matlab -r ProgramName
...does not work. I just get the menu as usual and everything else is ignored. I assume the admin has overridden the matlab command with their own custom script. So my question is can I start a specific version of the program by specifying the folder that the version is in? I thought it might be something like /opt/matlab/version -r programname
this might look foolish, but I am a bit of a linux noob. Let me know if I should just ask my administrator but I thought there might be something easy I am missing.
I'm booting ubuntu from my android phone via USB and it works great, the thing is anything i install or do while using ubuntu isnt saved the next time i boot from the usb unless its saved in my phones storage. I want to be able to keep booting ubuntu the same way but keep the programs i install there for the next time instead ohttp://mac.bigresource.com/add/add.phpf starting from scratch everytime.
View 3 Replies View RelatedI have dual boot system - Win7pro, Ubuntu 11.04, installed Win7 1st.I need to boot from CD, but can't get past GRUB... ?
View 2 Replies View RelatedI am trying to create a script that I can save on the desktop of my Primary computer and have it log in (get past the log in screen on the remote computers, and the banner) to multiple computers with the same user name and password in a LAN that is not connected to the internet.I am also trying to create a script that starts a script on the desktop of these remote machines ON the remote machines, but I think I am on the verge of figuring that one out with the "expect" command in a script.
View 11 Replies View RelatedI obtained this old tower from a relative, and she gave me the OS disk, but it came with two, "xubuntu 6.04" and "kubuntu 7.10". she thinks it xubuntu, but isnt really sure, but im going to say it is for now, back to the problem, when i boot up the computer it comes to a screen that looks like this.Type the password and -- press <ENTER> to leave password security enabled.-- press <CTRL><ENTER> to disable password security.Enter password:
View 14 Replies View Relatedthat didn't go so well. This is a Panasonic Toughbook CF-29 H3 model. Non-touchscreen, Pentium 1.4 M, 1.5 GB RAM, 40 GB HD, CD-ROM drive.
The machine boots off of the Ubuntu NBE 10.04 CD-ROM, goes to the splash-screen (the Ubuntu Logo and 4 orange/grey dots) and after a few seconds the splash screen clears, the screen goes blank, and the CD-ROM drive stops reading. That's it. I ran the Check CD-ROM utility from the boot menu of the cd-rom and it checked good. I ran the check RAM (MemTest) utility and that was good as well. I put the CD-ROM in my Dell Inspiron and it ran just fine letting me into the LiveCD environment.
I've tried Alt-Ctl-F1 to see if there's a command prompt, but that doesn't work. I can't find any special key combination that does anything for me.
I also burned a copy of Puppy Linux 5.0, and that meets with pretty much the same results. It gets to "Setting up the layered filesystem... Done" and then "Performing a 'switch_root' to the layered filesystem...Kernel Panic - not syncing: Attempted to kill init!
And that's the end of the show... she will go no further.
The thing has Win XP installed on it and functional, so the machine works...
I have a log file that has an I/O Error about halfway in. It is a syslog file with Sendmail log entries. I need to break into smaller files. I tried using a simple egrep command creating new files by the date _egrep "^Sep 19" filename_ but the command hangs when it hits the I/O Error.
I tried split but it bails out when it hits the I/O Error. Is there anyway to read the file and get past the I/O Error? IS there a way to read the file from the bottom up so I can get the data from the top and bottom?
i'm running ubuntu maverick on a dell laptop and it was working flawlessly until the audio started stuttering so I looked up a possible cure for it. I came accross a post that said uninstalling pulseaudio would cure the problem - so i did through software centre. When I was uninstalling it there was configuration files to uninstall as well. When I shut down the laptop and tried to restart it, it goes to login screen with my name but when I click on login it goes back to the same screen. This is the first time this has happened and im not sure what I can do.
View 14 Replies View RelatedSo I have a resolution problem. Before posting here, I've checked many MANY forums for similar issues, handpicking certain techniques and trying each. Sometimes they worked, and then my problem came back.
Distro: Fedora 14
Monitor: emachines 18.5" E181HV
GPU: Nvidia GeForce 8800GT
resolution: 1360x768
My problem is that the resolution will never stretch past 1024x768. I have the image of my desktop in the middle part of the screen, with black sections on either side. Here is a list of things that I've already done or tried:
Install Nvidia drivers
disable Nouveau via grub.conf
use xrandr to modify xorg.conf and add the resolution
different cable
different DVI converter
One day, I logged into my Fedora boot, and after a week of frustration, the issue decided to fix itself. So I continued on, using Fedora and planning on a permanent switch from Windows. I log back over to Windows to play some games and whatnot (I'm not a fan of how Wine handles some games). I then log back to Fedora, and the issue is back. The resolution is messed up again.I've since removed that partition from my drive, as I've reached my wits end with troubleshooting. My linux expert friend tells me it may be that my monitor is just not good enough, or is not sending/receiving the proper EID signature, thus will not accept the resolution, or something along those lines.
All I see from googling examples in awk is converting current date. How do I convert a list of past or future dates for example :
Jan18'09
Aug 7'98
Jun20'11
Apr 1'10
I will be using it to compare dates in a file and act on it accordingly.
im trying to collect some data. Is there a way to get the free memory stats over the past few days from some file... i looked into the sar log files but they dont have date stamps in them!
View 6 Replies View RelatedHow to update /dev directory after creation of new partition on a disk? I have the udev installed, it works perfectly except this. The new devices appear only on reboot.
View 1 Replies View RelatedMy Slackware's display suddenly got hanged with just a black screen and a mouse pointer visible not even the Ctrl+Alt+Backspace worked.So I switched off my system by pushing the button on the CPU .
After that when I tried to boot into my system it wont boot past going multiuser with below error messages
Code:
Hanging @ starting
Code:
Though I can login when trying to boot through singleuser but when I try to
Quote:
startX
It again gets stuck at the above errors
I'm running Ubuntu 9.10 (Karmic Koala) on a laptop and would like NumLock to automatically toggle depending on whether my USB keyboard is plugged in (numlock on) or unplugged (numlock off).
To accomplish this, I first installed the "numlockx" package. numlockx on and numlockx off works fine.
To hook into the device system, I thought I'd use udev. I have read "Writing udev rules", but I'm having trouble getting the udev rule to work.
First, here's an example of the dmesg output:
[20906.985102] usb 3-2: new low speed USB device using uhci_hcd and address 6
[20907.166403] usb 3-2: configuration #1 chosen from 1 choice
[20907.192904] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input20
[20907.193100] microsoft 0003:045E:00DB.000B: input,hidraw1: USB HID v1.11
[Code]....
I am not good at writing udev rules. I am using RHEL 4.7, I would like to invoke a file install.sh which is in CDROM as soon as the CDROM is inserted
View 2 Replies View RelatedI have written a udev rule as follows:Code:RUN+=/.../.../example.shWhenever i plug in a USB drive, this rule is executed, however it is also done when i plug in a dongle for WiFi. How do i make this udev rule specific for USB drives only. In other words this script should be run for USB devices only.
View 3 Replies View Related