I am complete new with Linux and install Ubuntu-10 on my Windows-7 notebook. The external CD drive is a very tiny small black box model from Taiwan, works fine in Windows. I`m getting it not working on the Ubuntu system. I try many mounted option what I found on the help page from Ubuntu, but no go.
View 14 RepliesI have an external drive which is parted into two partitions:
1) ext4, with filesystem ext4 which I use for backup
2) NTFS with filesystem NTFS
Since I re-installed jaunty the NTFS partition is owned by root. Whatever I do to make it change, it doesn't work. I used:
sudo chown jan:jan NTFS
sudo chown -R jan:jan NTFS
Still it says the owner is root and also the group is root. What else do I need to do to make me owner of this partition? The fileproperties say: drwxrwxrwx Still the partition is read only for me. In ntfs-config it says: "Enable write support for external drive"
I have a 2TB hard-drive connecting via a usb port on my server for automatic backups. I noticed the backups had stopped working and then I realize I had lost the ability to communicate with the drive.
/sbin/lsusb gives:
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046b:ff10 American Megatrends, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046b:ff01 American Megatrends, Inc.
Bus 001 Device 005: ID 059f:1018 LaCie, Ltd
[Code]...
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedIs Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies View RelatedI have a small IT consulting business and I am finding many of my clients couldn't afford Microsoft solutions and thus, going without... So a revelation hit me that I could offer Linux solutions, its just that I'm not a Linux guru... So after much research and installations of nearly every latest Linux distro, I decided on ClearOS as a good option for my clients that just require a good File/Print server, firewall and VPN solution... Everything was going fine until I got to the point where I was trying to get it to do backups to a USB drive... ClearOS does not come with the ability to do such, so from further research I found that I could install Webmin to handle that task and that it would not break ClearOS... Great, its just that its not working... It says its working, but its not.
[Code]...
Next I hit the "Save and Backup Now" button to test it out... all says it goes good... But when I check the device, there's nothing saved to it...
So I create another "Filesystem backup", I select the FlexShare directory that I want backed up and this time I select a local directory for the backup to go to... I hit the "Save and Backup Now" button to test it out. all says it goes good... But once again when I check the directory, there's nothing saved to it.
if I try to install a linux distro on an external hard drive, while I have windows XP on my primary, will the Linux stlil install a Grub on the Windows MBR. Or have I got that wrong.
View 2 Replies View RelatedI have a 1TB USB external drive, currently formatted as fat32. What I need to do is copy two folders and all their subfolders, totaling about 500GB, to that external drive. The USB drive will have to transfer back and forth between RHEL, Windows XP, and Mac OSX computers freely.What format should I go with on the USB drive, FAT32 or NTFS?What rsync switches should I use? I know I don't want to use -a because I don't want any permissions restored. I'm guessing I'll have to run rsync a couple times to fully get all the files, so I need to be able to cancel an rsync, then have it pick back up where it left off, not start over and recopy every file again.
View 8 Replies View RelatedI have a small IT consulting business and I am finding many of my clients couldn't afford Microsoft solutions and thus, going without... So a revelation hit me that I could offer Linux solutions, its just that I'm not a Linux guru... So after much research and installations of nearly every latest Linux distro, I decided on ClearOS as a good option for my clients that just require a good File/Print server, firewall and VPN solution... Everything was going fine until I got to the point where I was trying to get it to do backups to a USB drive... ClearOS does not come with the ability to do such, so from further research I found that I could install Webmin to handle that task and that it would not break ClearOS... Great, its just that its not working... It says its working, but its not...
So here's what I got, ClearOS 5.1 with Webmin 1.5
Here's what I have done to try to make it work after a good installation...
Under "Hardware" and "Partitions on Local Disks", it shows the USB drive as Device B... So I create a partion called "/dev/sdb1" Great, I'm thinking...
So I go to "System" and under "Filesystem backup", I select the FlexShare directory that I want backed up and then I select "/dev/sdb1" as the backup to device...
Next I hit the "Save and Backup Now" button to test it out... all says it goes good... But when I check the device, there's nothing saved to it...
So I create another "Filesystem backup", I select the FlexShare directory that I want backed up and this time I select a local directory for the backup to go to... I hit the "Save and Backup Now" button to test it out... all says it goes good... But once again when I check the directory, there's nothing saved to it...
I have Red Hat Enterprise Linux 6 installed on my machine. I am unable to mount an External Hard (NTFS). I have tried several options which are as under:
Option 1:After making a dir /media/windows mount /dev/sda1 /media/windows/ -t ntfs -o nls=utf8,umask=0222
Option 2: mount -t ntfs /dev/sdb1 /media/windows
Computer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
View 9 Replies View RelatedInstalled CentOS 5.5 some time ago and I can proudly say I am more than satisfied with it. Managed to install codecs, flash player, media players, chrome and opera browsers and all other things I need. My only problem is that as of about a week ago my external DVD player is not recognized any more by CentOS so I am unable to watch movies. My external DVD player is Magnavox and it works great but CentOS does not recognize it any more. I used to watch movies in CentOS in SMPlayer all the time. What to do to get it back?
View 1 Replies View RelatedI've been thinking about it and I have a few ideas how I could do this...
I could always just image the drive...
Code:
dd if=/dev/sda of=/media/EXHD/bakup_$(date +%F).iso
Also; I could use rsync...
Code:
rsync -auv --delete / /media/EXHD/bakup_$(date +%F)/
[Code]....
I've been doing mostly "dd" images...but was wondering if I'm just wasting time backing up a mostly empty HD (256GB and only 5% is used...so dd-ing seems like kinda of a waste).
anyone shed some light into these errors I keep getting for multiple files when I run rsync in verbose mode to a FAT32 external hard drive?
rsync: stat "/mnt/usbdrive/Batch 2/od venezuelan" failed: No such file or directory (2)
rsync: recv_generator: mkdir "/mnt/usbdrive/Batch 2/joseph gangster" failed: No space left on device (28)
I have 588GB available on my external hard drive, and i'm only trying to rsync 200GB to it, so its not out of space or anything like that. I've tried rsync with -r -t --size-only --delete and -r -t --modify-window=1 --delete and both ways seem to give me the message. or should i just reformat as NFTS and start over? i already had another 200GB data set copied on here, was trying to add a second. its all JPG pictures.
but I have literally just starting using Linux (Centos) in the last week or so. I am using a standalone PC that is not networked, and as I will be downloading and generating a lot of data on this machine, I would like to regularly backup onto an external hard driveIdeally I would likethis to happen automatically as there will be other people using the machine.There seem to be many different ways of doing this, and I am getting a bit confused about the best method to use.
View 2 Replies View RelatedI have a Seagate external hard drive and I want to use it to back up my home server since it runs Ubuntu 6.10 and the upgrade to 10.10. My problem is that I am not able to format the drive to use it. I can not change the permissons or if I try to format I have all sorts of trouble. I have tried doing it on the home server running 6.10 and another pc running 10.10 and had no luck. Is there a better way? I have even tried chmod and chown with no luck.
View 2 Replies View RelatedI am trying to recover files off a 3.5" IDE Hard Drive that had Windows ME installed on it. I have access to a MacBook, Windows XP Desktop PC, and a cd with Ubuntu 8.10 on it.
Attempts:
1) If I make the HD the only primary master HD it won't boot up.
2) If I make it a slave drive it won't boot up.
3) I purchased an external enclosure from Radio Shack which turned out to be crap and online reports supported this conclusion. I got nowhere with that thing. Bestbuy doesn't sell 3.5" IDE enclosures.
4) By using an IDE / SATA to USB kit, I am able to connect the HD to the PC via USB cable. XP will detect the drive, however the HD will not my displayed under "My Computer" nor "Disk Management".
Onto linux (this is where I grabbed the Ubuntu cd):
5) When connected, the HD will show up under "Computer" as a "USB Drive". When I double click on it I get the error "Unable to mount location Can't mount file".
Allow me to show you some commands I ran:
Code:
Code:
Code:
I was in the process of backing up data from my hard drive to an external usb drive when the drive suddenly became read only. Does anyone know how I can make it read/write again? I am using Debian Lenny and the drive is ntfs formatted. I have another ntfs formatted usb drive that is not effected in this way.
View 7 Replies View RelatedI have a 250 GB external hard drive formatted with Windows NTFS file type.How do I format it to use linux and what file type is best. I'm done with Windows so that is not a concern.
View 4 Replies View RelatedUbuntu 9.10 recognizes my Freecom 120gig external hard-drive (when it's plugged in) and I can manage its contents OK - except via the command line. I don't seem to be able to find its path-name. See below:
mike@mike-desktop:~$ cd /media
mike@mike-desktop:/media$ ls
cdrom cdrom0 FREECOM HDD
mike@mike-desktop:/media$ sudo fdisk -l
[Code].....
Despite all this info, I fail to get into the external hard-drive from the command line.
I'm trying to change the permissions of my external USB drive that i've plugged into my machine. It still reads user root and group root. I've tried chown -R kuier /home/kuiper/file Then chgrp -R users /home/kuiper/file But it still doesn't change permissions. I've also tried editing /etc/group and adding my name to plugdev group. nothing seems to be working?
View 1 Replies View RelatedI recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
In Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
I have the following "setup:"
iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]]
|
|
|[code]...
I routinely use the firewire drive to boot MAC OS X.However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd).My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)...Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.
The /mnt/ext is mounted to an ext2 filesystem, an external hard drive. For some reason I can't run scripts from there. Please see the session below.
luntain@plato /mnt/ext $ echo "echo success" > k.sh
luntain@plato /mnt/ext $ chmod 777 k.sh
luntain@plato /mnt/ext $ ./k.sh
[code]....
I want to copy a .tgz file from my computer to an external hard drive. However, I get the following message:cp: cannot create regular file `/mnt/usbkey/ws_2008/misc/minipar-0.5-W indows.tgz': ermission deniedI get this error with any file I try to copy to the external disk. rnal disk is recognized, when I mount it, I can see the files and folder I have there, but seems that I cannot copy anything to it.When I try to copy the same files from my computer to a usb flash drive, everything works
View 9 Replies View RelatedI;ve been using Ubuntu (10.xx) for a few months now and am really getting the hang of it.My NAS drive has now failed.It is a WD Mybook world edition 1tb with the blue rings.The drive spins fine and in windows I can see the partitions but I understand the file system is linux based.Can anyone help as to how I can mount the drive and recover the files using ubuntu / linux.I have a USB caddy to connect the SATA drive to my laptop.
View 9 Replies View RelatedI have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
View 2 Replies View RelatedI would like to mount a (permanently) attached external USB drive so that it is writable by multiple userids. Currently HAL is mounting the drive as writable to my owner user and readable for group and others. My m/c also runs as an FTP server and I would like said FTP server to be able to write files to the external drive. Just being able to specify a gid would probably do the job for me.
I have googled HAL and UDEV and also attempted to configure usbmount to do this, all to no avail. I am running SLES 10.3. So in summary, can I & how do I either make HAL mount the drive with gid=nnn, or should I not use HAL and simply make an entry in /etc/fstab and make sure a I get the same device address for this USB drive each time I boot?