I installed Red Hat AS 5.2, ran iptables.sh to put firewall on.
When i try to run httpd.conf i am getting below errors:
I do not understand why i am getting these error, i have conf.d file in place.
accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :
[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart
[code]....
While trying to run the file in PHP I am getting below error. httpd.conf not found Following directories (and its subdirectories) are accesible via Apache:
View 3 Replies View RelatedI have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I want to create custom errordocument file, and in php when every type of error occurs i want to redirect to my custom document instead of system error files.
I am using fedora 6.
I am unable to find httpd.conf file, where it is located.
I'm new to Apache configuration so could be misunderstanding but shouldn't the characters highlighted in red below be removed?
Code:
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies View RelatedHow to back up my httpd.conf from my server to my computer and only found one solution via a google search
[url]
I typed in locate httpd.conf and see that it resides in /usr/local/apache/conf/httpd.conf so I assume I would type $ cd /usr/local/apache/conf $ sudo cp -p httpd.conf httpd.conf.bak
I wanted to confirm this with an expert before I do damage that I cannot reverse.
what is the role of /etc/sysconfig/httpd configuration file in apache server .
View 2 Replies View RelatedI've installed apache2 and and when i access my URL from outside using www.proxy-ervice.de i just get a webpage with Index of /so i've run the command sudo gedit /etc/apache2/httpd.conf which give me the error: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file'/root/.local/share/recently-used.xbel.2EUJVV': No such file or directory(gedit:2509):Gtk-WARNING **: Attempting to set the permissions of`/root/.local/share/recently-used.xbel', but failed: No such file or directorymy httpd.conf is as follows,Userdir public_htmlOptions +IndexesOptions AllServerName localhost
<Directory "/home/gav/public_html/">
Order allow,deny
Allow from all
[code]....
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too:
[root@u15438957 ~]# yum update
Loaded plugins: fastestmirror, priorities
rpmdb: unable to join the environment
[Code]...
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
View 1 Replies View RelatedI configure my apache and can run http://localhost. There "I see it works!" but if I try to stop apache I get message that httpd is not started. I run
apachectl start - ok
but when I run apachectl stop it says "httpd (no pid file) not running"
I need to stop apache, because this is my dev machine and I want to start apache only when I make changes to my site. I am with slackware13.
We have apache installed at a directory other than the default location. There are two httpd.conf files on the server, one at the apache installation directory, and the other one is the default one at /etc/httpd/conf. The apache ran very well with the customized httpd.conf before, but after I installed php 5, the server seems taking the default httpd.conf and doesn't display the html pages which are installed at our apache directory. How to let the server know not to use the default httpd.conf and use the customized one instead?
View 3 Replies View RelatedI modified my httpd.conf file without making a backup. Apache runs fine but I am having a perplexing problem with drupal and want to try a vanilla httpd.conf file. Where can I get a 'virgin' configuration file for fedora 10?
View 1 Replies View RelatedI have installed XAMPP on my ubuntu machine, I typed nautilus in the command line and from there I tried to change the httpd.conf file from "/opt/lampp/etc" but it does not allow me to change the contents of the file. Error attached with this post.
View 5 Replies View RelatedThis is not intended to teach you about http.conf and its various options. This guide is intended to help with speeding up your web servers by assisting in protecting them from petty abuse, such as hotlinking and scraping, and by using options that yield better performance in general. The methods used in this guide address general concepts, but the implementations of the methods are completely arbitrary, and are tailored to my needs. Each user may want to make their own modifications to suit their own setup. Again, this is a general guide, meant for instruction purposes only. I will go over each significant section in the file, and explain what it does, and the reasoning for it.
This assumes that you WISH to disable the ability to use .htaccess, and to administrate your websites on the server level. If you have a shared hosting plan then you cannot administrate your server at all, and so some of these sections will not apply to you, but some of them will; the ones that still do, you will place in your .htaccess file, in place of your httpd.conf.
Some of the options in these files are default, and so they may not be explained at all. This thread is more about the non-standard configurations.
Most of these options are standard. Notice that there are extra AddTypes, for things such as .xpi files (firefox plugins, etc), and .ogg video files.
Also take note that we disable the option for .htaccess. This makes a dramatic speed increase. This is because if .htaccess is enabled, then for each request made to your server, apache must look in the directory where the requested file resides for an .htaccess file (it does not matter whether one is there or not, and the lookup is NOT cached, so it much be performed EACH request). If apache finds a file, it must parse it. Then it must look in the parent directory, and in the parent's parent, and so on, until it reaches root (/). This is done for EACH and EVERY request. Disabling .htaccess and administrating your server at the global level will make a dramatic difference on busy servers. On not so busy servers, you may not notice the difference.
Note that we disabled cgi-bin completely. This is because we're running mod_php, so we don't need cgi-bin. If you're not using it, lock it down so that no one else can .
Also note that we used AddOutputFilterByType to make sure that all text files were compressed before being sent across the wire. This saves bandwidth.
Of this section, most of these options cannot be set in .htaccess. Options such as the addtype and addhandler and addencoding CAN be set in .htaccess; the rest are global/sever level only.
Code:
Any changes in the way httpd.conf works in 9.04Yesterday I updated from 8.04 to 8.10 and then to 9.04. All works fine, except for Apache Virtual sites.I had several defined in my httpd.conf file, which I used for testing clients' websites.ince the upgrade the virtual sites are not recognised, and all access is done at the original level /var/wwwAny changes in the way httpd.conf works? checked the Apache docs, but found nothing.Here's the httpd.conf I've been using:
<Directory /var/www/clientname/htdocs/products>
AllowOverride All
</Directory>
[code]....
Installed Apache2 on a Debian Lenny system. copied my old /var/www/htnl over to the new system.
Now when I open my browser to my PC I get the index.html under /var/www not /var/www/html.
I have this in my httpd.conf:
Code:
From what I have read, the DocumentRoot should have pointed to /var/www/html overriding /var/www?
If I use "10.1.1.13/html" it works the way it should.
what's the difference between the following 2 methods for specifying in httpd.conf to use PHP to parse files with extension .php?
Method 1
AddType application/x-httpd-php .php
Method 2
LoadModule php5_module modules/libphp5.so
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Where can I find the httpd.conf files in FC11 ??
View 1 Replies View RelatedI'm having a problem with mod_suexec in Fedora 15.I have suexec set up in Apache, snippits from httpd.conf:
Code:
LoadModule suexec_module modules/mod_suexec.so
...
[code]....
We are trying to migrate from a centos server to ubuntu server, but we have some problems with an application called Topincs [url].
The installation is quite simple and I did it several time (but with ubuntu it's the first time).
Probably there are some parameters to set that I don't know, but even if the installation works fine and I can see the home page, the application doesn't work because RewriteRules aren't applied.
First I tried to ensure that mod_rewrite works fine and I found a weird situation: rewriterules work if they are in .htaccess but don't work if they are directly in http.conf.
I am a network/system Administrator in an avg. based company, we are using Cent Os as servers. We are developing applications in both php & java, for java we are using apache tomcat as server (port number 8080) & for php we are using apache as server (port 80). Php applications are uploaded in the server and giving the link to our clients like localhost.com/chrome. Now we are planning to give the java based application for testing purpose to clients & can give the application link to client as localhost.com:8080/mozilla. Is it is possible to change the link localhost.com:8080/mozilla to localhost.com/mozilla with out changing the portnumber of apache tomcat server & without interrupting the php applications, that means our clients can access php application as localhost.com/chrome & java application as localhost.com/mozilla in the same server at the same time.
View 9 Replies View RelatedI am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
I've been trying to figure out how to set up my Apache 2 running on Ubuntu 9.10 to provide a reverse proxy so I can see my wifi network camera monitoring my dogs and still have access to my family website. First, I followed the suggestions from this thread on Ubuntu forums: [URL]. I set up a similar rule set at the end of my /etc/apache2/sites-available/default, restarted apache -- from which I got a response saying that Apache2 could not determine the server name -- and then tried logging into my server through its ip address. When I tried http://192.168.2.80/dogCam, I just got a 404 error. Here's what I added: (I also tried my domain name, but it also didn't work.)
Code:
<VirtualHost 192.168.2.80:80>
ProxyPass /dogCam/ http://192.168.2.160/
ProxyPassReverse /dogCam/ http://192.168.2.160/
</VirtualHost>
When I looked at many other threads, I get recommendations to have my setup in httpd.conf. But, in both this server and a freshly installed Ubuntu laptop, my httpd.conf file is empty! I tried copying and pasting the recommended contents of the following thread, with the example proxy paths replaced with the ones I needed: [URL]. Straight-forward tutorials don't seem to apply, as Ubuntu has a blank httpd.conf file. I figured out that Ubuntu seems to load its modules by simply adding soft-links to the modules of interest from modules-enabled to modules-available. But, after a full day of trying to figure out what looks to be fairly simple and well-documented, I am at a loss for setting up this reverse proxy or even figuring out where to set ServerName to define my domain name to Apache2 in Ubuntu.
I'm installing Wordpress and I want Hosting Multiple Sites with them. For that I need modify the httpd.conf file but it's empty. Where I can make that changes? These are the changes:
1. Type: LoadModule rewrite_module /libexec/mod_rewrite.so
2. Find the <VirtualHost> section in the httpd.conf file.
3. Find a line in the <VirtualHost> section of the httpd.conf that looks like this: AllowOverride None
3. Replace that line with this line: AllowOverride FileInfo Options
4. On a new line, type ServerAlias *.[URL].
5. Save the httpd.conf file and close it.
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I've got a dedicated server using whm/cpanel and there is a particular domain being hosted which contains a very elaborate .htaccess file which is full of mod_rewrite rules, among other things. I've been asked to try and get the contents of this .htaccess file into the httpd.conf (or some appropriate include file) to improve performance.
I've been reading this page and it's really confusing me: [url]
In the file usr/local/apache/conf/httpd.conf I see that there are two VirtualHost sections that appear to be relevant for my domain (which I'll call mydomain.com). The first listens on port 80 and the second is on 443. Seems to me that my apache directives in .htaccess would belong in this section. In the first section I see this:
Code:
In the second section I see this:
Code:
The problem with both of these is that the directory /usr/local/apache/conf/userdata does not exist, much less the full path to either of those files.