Is there a list of linux distributions that support copy to ram so that you don't have to use a live cd or usb? I would like a distribution that has lots of features instead of something like dsl.
View 3 RepliesI was wondering if I would be if i able to use x86 linux distros with my 64 bit processor, or do I have to use the 64 bit version?
View 4 Replies View RelatedAnd I mean what the thread title is sayin', when new version of the distribution is released? But I don't think that it would be bad if they all would have some general promo video. I think of it as a nice way to promote your distro and I also think that that kind of promotion would attract more users. As an example, here's the link to Sabayon 5 promo video; [URL].
I find it to be very simple, short but at the same time great. And I like it very much. In my opinion, all that should be said, considering all the facts that is, was said in that video and in a very nice way. I think that there was no inner distro things in it for a reason, if you understand me. Anyhow, my vote goes for that kind of promotion, but sadly I have seen only few of that kind of videos on the net.
compare the best ram memory usage among linux distributions?
At the moment with some live linux distributions I run "free -m", on the terminal of the graphical dektop environment, without running any other command or application. Is "free -m" the rightest way to evaluate the amount of all the available ram memory left by a linux distribution? Which are the values to sum to evaluate all the available ram memory for the operating system?
Code:
free -m
total used free shared buffers cached
Mem: 499 451 47 0 23 229
-/+ buffers/cache: 198 300
Swap: 1027 0 1027
I've got a great little Thinkpad X22 laptop that I hate to put to rest. It isn't really any good for the latest and greatest Linux distro since it's something like 10 to 12 years old. What I've been wanting to do for quite a while, now, is build a text-base laptop that I can run VI, Emacs, Mutt, etc. I'm looking for some recommendations for distributions that will allow me to do an install without a GUI desktop. Also, a distro that, in this form, will still have good support for wireless. I figure that if I can get my wireless card(s) working, I can pretty much do anything with it. I've been running Slackware, Ubuntu, and Fedora 12 on my Thinkpad T41. Do either of those distributions allow an install without a GUI desktop?
View 6 Replies View RelatedI have no real LINUX system experience and therefore the company has tasked me to get a VMware Appliance running in which they can build their product.
The product runs on Red Hat 7.2. I have attempted many times to get Red Hat 7.2 installed on VMware player. It always fails when I get to Xwindows. I need Xwindows as the company is going to use NetBeans 6.9 for development.
I downloaded an Ubuntu 10.04 Appliance, which runs fine.
The idea is to build the product on the Ubuntu and run it on the Red Hat target.
All systems are x86 platforms.
Just started with Linux and am eager to increase my knowledge in Linux. My question is, Are Linux command same in all distributions?
View 2 Replies View RelatedWhat are the default tools used by most distributions? This includes, embedded distros, BSD's systems, Unix-like...I'm asking this because nowadays distributions come with more and more software. But as far as I know "binutils", "bash", "grep", "ed" and "awk" are standards. What are the standards utilities to start learning that are most cross-platform [i.e.: the "shells", "services", "editors" and others].
View 8 Replies View RelatedIs it practical to have 2 different Linux distributions which share the same home partition? I know that programs save their configuration in home directory and that can mess up, yet I would like to play with different Linux distros at the same time while always finding my files at home.
View 10 Replies View RelatedI use Ubuntu, DSL, Puppy Linux, and PCLinuxOS. I bought the CD's and, not for the price by any means, wish to learn the ABC's of downloading - just to know how.
View 2 Replies View RelatedAs I was trying to do some patching on Ubuntu's kernel I've found out kernel.org's patches cannot be merged correctly with the kernel source. I'm wondering if distributions like Ubuntu have their own kernels different from official ones?
Another thing that I think could be related to this question is the name of the directory of source tree in Ubuntu that is linux-headers-2.6.31-21. What does that 21 stand for? Also there is a directory named linux-headers-2.6.31-21-generic. What's the difference between these two?
I'm using a project which mentioned I need to used ohphone. However I can't find any Fedora/CentOS versions of ohphone that work with OpenH323.
View 1 Replies View RelatedI would like to add latest tc+esfq functionality to machines running older distributions, FC3, FC5 etc. I am told I should down load the latest kernel and recompile with the proper patches which I can do. Are there problems with using latest kernels with older distributions, they are all running 2.6.x, but the x has of course gone up since FC3.
View 1 Replies View RelatedI want to know what are the difference between redhat, slackware, ubuntu and others distributions.
View 1 Replies View RelatedI first tried latest version 10.10 desktop. very slow booting in a Centrino CPU laptop not booting at all in a N455 CPU netbook. Tried version 10.04 which seems to work better fast booting in Centrino CPU laptop. fast booting in N455 CPU netbook. From Centrino Laptop with Windows XP on HD, once loaded Ubuntu as persistent live program from a USB drive, tried to install the program on SD memory card in PC slot. Upon request, installation made onto that memory only, not on inside HD, hence formatting only that memory. Upon completion, after removing the external memories and booting again the PC it does not boot of its own any more. XP OS damaged. I have recovered the system with a Toshiba backup CD but the HD has been formatted and all data lost. How can this happen ? I'll never try anymore to permanently install Ubuntu. I'll use it as persistent live on an external memory. I only have an old PC laptop with 128 MB RAM for further installation testing but no Ubuntu release can boot there. By the way, Lubuntu 10.10 look more fast and safe although appears to have more limitations then Ubuntu 10.10.
View 3 Replies View RelatedI am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity.The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this.I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda
/dev/sda1 the boot of 500MB formated as ext4
/dev/sda2 the swap of 6096MB formatted as swap
/dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this.
However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition.As a result I am unable to make use of the remaining space on the HDisk.I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
Would appreciate some tips on how to install the other versions of Linux on this HDisk....
I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedHow to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).
More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.
I was wondering if there are alternatives to "Distrowatch" where the various linux distributions are responsibly and unbiasly discussed?
View 7 Replies View RelatedWhat is the best way to setup for a number of very different distributions of Linux on a single machine/HD? Can multiple systems use the same oot partition? That seems to be the bottleneck. Only 3 primary partitions possible on a single HD, allowing for all other partitions under an extended partition.
View 14 Replies View RelatedJust got done upgrading my Ubuntu from 10.10 to 11.04 and I oddly enough have 2 Ubuntu 11.04 distributions installed:
1.) 2.6.35-22 (in the previous linux versions window in Grub)
2.) 2.6.38-8 (Main Grub Menu)
Not sure why my system was installed with 2? I thought it would be the most recent one?
Is it possible to install unity in other linux distributions? Is it already available for debian?
View 2 Replies View RelatedI just been given a project to compile code to run under Red Hat Enterprise Desktop 5.3.
Does anyone know if Red Hat sells older versions of Red Hat Enterprise Desktop? RHEL 6 was just released last month. As I understand it, code compiled under RHEL 6 will probably not work under 5.3 due to difference in glibc.
Can I compile code using a Fedora distribution and run the code under Red Hat Enterprise Desktop 5.3 without recompiling the code? If so, does Fedora offer older versions of their distribution?
I am relatively new to linux, but not to computers. I want to try out several different distributions and learn more about linux, but I read that some distributions will not play DVDs. Since my computer is my DVD player, I need this to be an option.
View 2 Replies View RelatedJust a general question: If I have /home on a separate partition, is it possible to mount that /home partition on multiple distributions (Ubuntu, SuSE for example) on the same PC?
View 8 Replies View RelatedI have a serious problem relating network connectivity under all Linux distributions. I have tried variety of browsers, but the webpages either load partially or do not load at all. Surprisingly, app manager still works well, and I can download apps at full speed from xterminal or app manager. This became an issue which renders Linux distributions close to useless to me. I am currently connected through a router, but direct connection does not solve the problem. What is more, my phone, Nokia N900 is experiencing the same problem with its web browser. I assume, it's due to the fact that N900 uses full Linux distribution. Internet works just fine under all Windows versions (XP, Vista, 7).
View 1 Replies View RelatedI would like to set up my computer to dual boot with two different linux distributions, Ubuntu 10.04 32-bit and Slackware 13.1 64-bit. I'm not 100% sure how to go about this exactly. Ideally I would like for both distributions to share the /home directory, that way I can switch between distros and keep all my personal data neat and tidy without having to access it across partitions. This has the added benefit of keeping my filesystem usage in check. However I'm not sure if I'll have to go through a lot of permission headaches with this scheme. I would be using the same username on both distros. At the moment I'm thinking of having a common /boot directory, two different / directories (one for each distro) and a common /home but I don't know if this is feasible. I
Acer Aspire 5538 notebook
AMD Athlon X2 @ 1.2 ghz
4GB RAM
[code]....
I have a server which serves up home directories and users for the other machines. So when you login to one of the other machines your home directory is stored on the server. The problem here is, some of the client machines are running Red Hat and others are running Ubuntu and this causes configuration errors in some applications (e.g. Gnome).
View 1 Replies View RelatedI have Debian installed but I need to dual boot with distribution based on Ubuntu 14.04. This is my first UEFI dual boot install attempt. And I must do it right. I must not lose my Debian !
Code: Select allDisk /dev/sdb: 232,9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
[Code] ....
Ubuntu will go to /dev/sdb5 but I don`t no for sure what to do when installing Ubuntu. How to select during install existing UEFI partition(/dev/sdb1) so Debian and Ubuntu can use it. Can I select existing UEFI partition like I would do for /home or /swap ? Will this work ?
And what will happen with Grub if I select install grub ? I want to manage grub from Debian, it is my main OS. Can I skip Grub install and just update grub on my debian after ubuntu install ? Or I just install grub, then after completed Ubuntu install I install it again from Debian. Will this work ?
Is procedure of installing dual boot trivial like before or UEFI hide`s some unpleasant surprise.
I am attempting to make an application that requires a variety of libraries associated with OpenGL. So far I have managed to find most of them in the devel packages (Mesa, freeglut) that come with the standard distribution. However, I cannot find libglui, though it appears to be standard in some other distributions.
View 2 Replies View Related