I was always confused about the way it says that the execute permission for a directory means "able to list it". I just don't get it.Does no exec permission mean "still able to read files from in the directory, but not able to find out what files it contains" or what?
View 2 Replies
I was wondering what is the difference between directory execute and read permission?Also, how do I recursively remove executable permission from a dir, but just apply it to normal files?
View 6 Replies View RelatedIs there any use if a file has only write and execute permission and not read permission?
View 2 Replies View RelatedMy shell script runs from the command line, but fails in cronjob. /bin/sh: asper.sh: Permission denied
-rw-r--r-- asper.sh I guess the permission should look like '-rwxr-xr--' How can I change the permission to be like that?
How can I give execute permission to chmod command from run level 3.Because in GUI mode we have the execute option in the properties of file. E.g. I gave following command
chmod -x chomod
After that I want to give the execute permission (x) to chmod command again but how from command prompt?
i need 2 king of permission 1 is full access and other is read+exceute. it can be by ip by userid or by group. as i am beginner try to find such example cant find it so far see below my smb.conf file
[Code]....
On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso.The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message:bash: ./FPS1_1: Permission denied.I can open other files like text documents (the executable also comes with shared libraries).I realized I had burned the CD as root so I burned another one as another user but I still have the same problem.
View 2 Replies View RelatedI have a program(that is written by me) which need super user permission to execute it. But I need to let the normal users to execute it without using 'sudo ./executable' and just './executable'. how i can set the program to execute by the normal users without using 'sudo' or password prompting.
View 2 Replies View RelatedI am a newbie in writing unix scripts: I have a file with a list of arguments like:
./a arg1 arg2 arg3
./b arg1 arg2 arg3
.
.
.
./n arg1 arg2 arg3
But these binaries (a,b,..etc) are in a different sub directory from where the above file is located. How do I write a script that will pick up each line from the file and execute it.
We have a test server in which we have not taken backup. Contents under /etc is entirely lost.
I need to execute scp to copy mysql data directory.
Also it is in remote location. Can I recover the data by scp by creating some /etc/passwd , /etc/shadow files ?
I am working at a client who has a project where code is a mixture of different source control systems. So a layout might be like this
project/a/.svn
/a/subfolder/.svn
/b/.hg
/c/subproject/.svn
/d/.hg
So I am trying to put together a simple command that when executed from the project folder will run the appropriate hg/svn command in each project i.e:
[Code]...
Since the client has many such projects, Instead I am looking for a solution similar to find -exec where the svn/hg commands are automatically executed on each first level of match (i.e. svn up is run in the project/a folder but not in project/a/subfolder). How can such a command be constructed ?.
Whenever execute the below scriptlet with out proper file name it deletes /tmp directory .I guess this is because value of variable a didnt get initialized and there for rm -rf /tmp/ get executed and entire /tmp directory get deleted.How would i avoid any empty variables to be used in script? as this is a classic case of destructive script.
Code:
#!/bin/bash
echo "Enter file to delete from tmp"
[code]....
I have 3 images made by clonezilla now I want to restore 1 of them, but when I try to use clonezilla to restore, there's no option to restore image. I can see the images in home directory and file is owned by root in my home directory. I'm trying to transfer image to usb hdd.
Did I place image in wrong directory or is it permissions problem.
I have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
View 4 Replies View RelatedIs it possible for listing directory and files' permission into numbers?
Generally ls command shows directory and files' permission as follows;
[root:maestro:/home/ddisk_net]# ls -al
Total 44
drwx------ 4 ddisk_net users 4096 7월 20 10:40 .
drwxr-xr-x 21 root root 4096 7월 20 10:28 ..
-rw------- 1 ddisk_net webteam 5 7월 20 10:40 .bash_history
-rw-r--r-- 1 ddisk_net users 33 1월 22 2009 .bash_logout
[code].....
I set security context for a folder as 702 to enable other users to create and delete folder contents.But whenever other users try to create a folder,its says "Permission denied".
View 11 Replies View RelatedI'm having trouble breaking down permissions in linux. Here's the scenario. I have two users: UserA & UserB with each having to ownership and access to directories myDirA and myDirB respectively.
UserA --> /source/myDirA
UserB --> /source/myDirB
I need to set the permissions so that userA can access myDirA and myDirB. There are other users and directories but they should not be able to view outside of their own directories (which is the way it is now). I don't have groups set up for them and I'd rather not change anything else but just the permissions.
rwxr_x_r_x UserA
rwxr_x_r_x UserB
They're read/write/exec permissions are identical.
I have a triple boot system with Ubuntu 11.04, Windows 7 and Windows-XP on it. My disc configuration is something like this... ('cause I think it would be required for you to understand my problem) I have a 250GB hard disk which was originally partitioned with Windows-XP in six partitions C,D,E,F,G and H (All NTFS type) with 'C' drive having Windows-XP on it and 'D' drive having Windows-7 on it.
I installed Ubuntu on the 'H' drive by partitioning it into two halves of approximately 20GB each. One partition is named 'New Volume' as per Windows naming scheme. On the other partition I installed my Ubuntu-11.04 OS. As per my plan I would be using this 'New Volume' for all my Ubuntu related data and software only. I want to install 'Ant' build tool for Java to be usable on my Ubuntu. For this, as described on the Apache Ant user manual I downloaded the 'apache-ant-1.8.2-bin.tar.gz' and extracted it. All this I did in the 'New Volume' drive.
Now as per the 'Ant' manual I needed to change a file's ('/media/New Volume/ubuntu files/software files/apache-ant-1.8.2/bin/ant') permission to executable, which is currently set to '-rw-------' and I want it to be '-rwx------'. I've tried various things such as 'chmod/sudo' and also tried changing the permission with the 'root' user, but so far I've not been able to change the permissions for this file. However, if I copy the 'apache-ant-1.8.2' folder to '/home' directory then I've been able to change the permission for the concerned file.
I am shocked that I still don't understand "Execute" permission in linux. There are three permission - read, write, and execute. I understand that read and write literally, but what does execute do exactly? Let's say I have example.php with execute permission. What can I do with example.php?
View 3 Replies View RelatedI have a directory called data. Then I am running a script under the user id 'robot'. robot writes to the data directory and update files inside. The idea is data is open for both me and robot to update.
So I setup the permission and owner group like this
drwxrwxr-x 2 me robot-grp 4096 Jun 11 20:50 data
where both me and robot belongs to the 'robot-grp'. I change the permission and the owner group recursively like the parent directory.
I regularly upload new files into the data directory using rsync. Unfortunately, new files uploaded does not inherit the parent directory's permission as I hope. Instead it looks like this
-rw-r--r-- 1 me users 6 Jun 11 20:50 new-file.txt
When robot tries to update new-file.txt, it fails due to lack of file permission.
I'm not sure if setting umask helps. In anycase the new files does not really follow it.
$ umask -S
u=rwx,g=rx,o=rx
I'm often confounded by Unix file permission. Do I even have a right plan? I'm using Debian lenny.
I'm trying to do something like thisi created a group called www and made this group the owner of the directory/var/www/htmlso i can read and write to it.of course I've add my self to this group, but it seems i can't read and write.the syntax i used was something like chown :www /var/www/html.didn't workonly when i used chown samurai:www /var/www/html i could finally could create new file.the reason i don't want to specify the user name is because I'm thinking of a scenario when i need to give permission to a large group of ppl and don't want to do it user by user.
View 5 Replies View RelatedI am installing oracle 11g on Oracle enterprise Linux 5 i applied all the steps in doc [URL] when trying to switch user to user oracle i am facing the below
[root@oel5 ~]# su - oracle
su: warning: cannot change directory to /home/oracle: Permission denied
-bash: /home/oracle/.bash_profile: Permission denied
i am not able to mount a pen drive (which is formatted in ext2 format) with directory permission drwxrwxrwx and file permission as -rw-rw-rw.
View 3 Replies View RelatedI'm trying to start a program, but I keep getting the error:
"There was an error launching the application." Details: Failed to execute child process "/home/jjo/Desktop/0ad/build/resources" (Permission denied)
I've tried changing the permissions of the file, with no luck.
I'm running WoW through wine. In order to install addons I need to give all the files in the program permission to execute as a program. the problem is I can't (dont know how) just right click the folder and give everything inside permission i have to open each one and give them all permission, which can quickly turn into hundreds depending on the addon. how to give permission to execute as a program to all the files in a folder at once it would save me a lot of clicking and time.
View 2 Replies View RelatedHere are some example files that are shared through samba:
-rwxrwx--- user1 group1 file1.txt
-rwxrwx--- user1 group1 file2.txt
When user2 (who is also a member of group1) edits file2.txt the permissions change:
-rwxrwx--- user1 group1 file1.txt
-rwxrw---- user2 group1 file2.txt
user1 then has issues opening the file. This also goes for new files that are created (they are missing the group execute permission).
I have set the option "create mask = 0770" in my smb.conf. Without this set, permissions default to something like -rwxr--r--
I want to install Codendi softwr to my Centos 5.3.But can not execute the installation script gives an error permission denied./etc/fstab file does not contain a path that holds my CDROM drive.
View 2 Replies View Relatedhere is the upload form:
<form enctype="multipart/form-data" action="uploader.php" method="POST">
Choose a file to upload: <input name="uploadedfile" type="file" /><br />
<input type="submit" value="Upload File" />
</form>
[Code]...
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedAssume the directory I locate is /mypath/bin/ , there exists a file named "ccache"
Then I execute ccache code...
