General :: Make New File Permission Inherit From The Parent Directory?
Jun 12, 2010
I have a directory called data. Then I am running a script under the user id 'robot'. robot writes to the data directory and update files inside. The idea is data is open for both me and robot to update.
So I setup the permission and owner group like this
drwxrwxr-x 2 me robot-grp 4096 Jun 11 20:50 data
where both me and robot belongs to the 'robot-grp'. I change the permission and the owner group recursively like the parent directory.
I regularly upload new files into the data directory using rsync. Unfortunately, new files uploaded does not inherit the parent directory's permission as I hope. Instead it looks like this
-rw-r--r-- 1 me users 6 Jun 11 20:50 new-file.txt
When robot tries to update new-file.txt, it fails due to lack of file permission.
I'm not sure if setting umask helps. In anycase the new files does not really follow it.
$ umask -S
u=rwx,g=rx,o=rx
I'm often confounded by Unix file permission. Do I even have a right plan? I'm using Debian lenny.
i have a computer with 3 users on it, and a folder using samba that everyone on the network has access to. Lets say that, the folder is stored in /etc/sharedfolder. What happens is, when user1 puts a folder in it, then logs off, user 2 attempts to modify it and fails, because permission is set to 755, and they are not in the same group. (even if they were, it should still need to be 775) Anyway, my current solution is, every 5 minutes a crontab changes permission like so: chmod 777 -R /etc/sharedfiles && chown useradmin:superadmin -R /etc/sharedfiles Which works, but seeing as there is getting close to a gig in there, this is a bad solution, as it eats up the computers resources. Solutions that i think might work:
1) create a script that only changes permissions that need be changed. 2) change file permission settings to force all documents to inherit parent document settings
I do have an Ubuntu Headless server which is running Samba on it. My mp3 file collection resides on that server on is being share.
So far, no problems connecting to that drive and writing from my Windows box on that share. But if I use my main laptop, which runs Ubuntu Lucid and download an mp3 song from Amazon, the moment I move that to the share, I got permissions problems from the Windows machine. This is clearly a permission issue with group and others; the song is being created on the share without read and write permissions to others or the samba group I created.
My question is. How can I make this process simple or automatic, when moving songs to the share? I don't want to go there everytime and run ...
Code:
Which was basically how I reset or fixed the problem.
I've read about umask, but not sure if that applies here or not, because I'm not creating the file but moving it.
I ftp into the server and see the files, but when i try to make a directory or upload a file it returns an error saying that permission is denied.I am wanting the users to be able to log on with their user account and then be able to have full control over their directories. What can i do to fix this problem?I have enabled port forwarding for ftp. What else is there i can do? If you need any extra information, let me know! I would like to get this fixed asap!Here is my vsftpd.conf file.
# Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file
I have a FAT32 SD card with a file on it, that, viewed in Windows the filename consists of a long string of nonsense. Viewed in my Android phone's Linux terminal, ls -a shows nothing in the directory. When I try to delete the parent directory with rm -rf deleteme, it fails with "Directory not empty". When I try to delete/move in Windows 7, it says the filename would be too long and/or Explorer crashes. Windows disk check doesn't find anything wrong. How can I delete this?
I am using fedora 13. When I list the root directory with the command: 'ls -la'. I see the parent directory symbol as '..' So, which is the parent directory for root directory?
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory make[2]: *** [libmpn.la] Error 127 make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
Create the following directories: parent/child Navigate to child and create a file named child (this is an executable file in my case, not sure if that makes a difference). I need to create two "link to executable" links in the parent.
I had assumed that this would work: ln -sf ./child ../child1 ln -sf ./child ../child2
But that creates a "link to folder" (./child) in the parent directory. If I change it to: ln -sf -t.. ./child child1 ln -sf -t.. ./child child2 I get an error, "ln: '../child': cannot overwrite directory".
If I do it from the parent directory (which I cannot do, this is part of a Makefile recipe): ln -sf ./child/child ./child1 ln -sf ./child/child ./child2
It works. Note that I cannot alter the names of any directories or files. How do I create the links when the current directory is the child?
I'm able to use the following to remove the target directory and recursively all of its subdirectories and contents. find '/target/directory/' -type d -name '*' -print0 | xargs -0 rm -rf
However, I do not want the target directory to be removed. How can I remove just the files in the target, the subdirectories, and their contents?
and my current working directory is sub1link, is there a quick way to either: change directory to link source parent (i.e something similar to cd .. but take the user to /dir1/ change directory to link source (i.e switch from /dir2/sub1link/ straight to /dir1/sub1
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
I am trying to move all the txt files with a script from multiple directories to one directory, adding the parent directories of the files to the file names.It's a little complicated to explain, but i hope the script i have so far explains what im trying to do better:
Initially I thought - use a for loop with ls in it:
Code:
However this causes lots of problems (folders have extensions, I have duplicate folders, the names with spaces create a folder for each element of the name).
The contents of the folder is basically movies (some with subtitles). Some of the names have things like (original) or CD1 CD2 in them.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
I've found several posts discussing how to do this in with the terminal, but none exactly fit what I am trying to do. And since I'm still very new, I was hoping for some help.
I have a parent directory called "Music." The subdirectories all start with "artist", some go further as in "artist/album/cd1". So right now the structure varies in the following ways code...
How can I move all the files (or the file types that I choose) to the parent directory "music"?
(By the way, for any who are interested, this is so that I can use an external hd with a PS3. ("playstation 3"--for anyone who was in my predicament searching the threads)
I have 3 images made by clonezilla now I want to restore 1 of them, but when I try to use clonezilla to restore, there's no option to restore image. I can see the images in home directory and file is owned by root in my home directory. I'm trying to transfer image to usb hdd.
Did I place image in wrong directory or is it permissions problem.
I was always confused about the way it says that the execute permission for a directory means "able to list it". I just don't get it.Does no exec permission mean "still able to read files from in the directory, but not able to find out what files it contains" or what?
I've a problem on one of my servers with file permissions. Quite simply , when I run chmod 777 -R against a folder , it seems to be inconsistent on making that particular folders permissions trickle down to the folders beneath. Some folders inherit its permissions , some don't. For example...
/projects Contains /Jan /Feb /Mar /April
They all in turn contain folders marked /1 , /2 , /3 , up to /10, these folders all contain more folders , running to a depth of 6.
However , depending on what folder our users save their files into , some are saved with rwxrwxr-- , some get saved with rwxrwxrx. Forgive my lack of understanding but if I run the above command against the top level folder will this not make every folder and file below it inherit its permissions of 777 ?? Or is there something else that I need to do?
I am runnung ubuntu 9.10 desktop edition as a server. I am using a FTP client program to upload some files(index.html, background.png, etc) and everything is fine with that. And currently all my files are in /home/myname/ folder. What I want is whenever I log in with my ubuntu account in the FTP client program, I can actually see the list or contents of the very root directory.
In other word, I can see every folder like /bin, /boot, /etc, /root, so on in the FTP software and I can download it. I don't want to allow to access the parent(or root) directory. Is there any possible way to set up the sutff?
I am facing a problem in Windows due to a virus called Newfolder.exe which creats files with the same name as it's parent directory and an extension .exe and this happens for every directory in the entire hierarchy in the infected pen drive. The antivirus detects them, but is sucking slow. So I thought this is a good opportunity to use the concepts of the all mighty shell script to remove those as they follow the same pattern. Say my complete path is
Code:
/home/pkd/fol1/
The virus would have created an file with complete paths
Quote:
/home/pkd/fol1.exe
If fol1 has two more directories fol11 and fol12 Then there would be two more .exe(virus created) in the following path
I keep getting a segfault in compiz. I've tried everything! This is from a fresh install without and accelerated drivers (I have ATI)
Quote:
Code:
**Switching to Compiz window management** /usr/local/bin/compiz-indicator:99: GtkWarning: Can't set a parent on widget which has a parent menu.append(kill) /usr/local/bin/compiz-indicator:100: GtkWarning: Can't set a parent on widget which has a parent menu.append(start)
I have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
i have a directory ( /dir1) that belongs to a user1:group1. I need to know if this is possible and if so a basic idea of how to. when i copy a file into /dir1 (as root) i would like it to obtain a different user and group. Is this possible?
I've mucked through and figured out how to mount a windows share. I can access the folders I was looking for, but the windows share was not what I thought it would be. I was looking for the specific shared folder. Instead I got a root level parent directory that included the folder I wanted, and a couple others.
smbclient -L <ipaddress> gives me a parent directory on the root
First question: Can I mount a specific folder within a share? Second question: Could somebody define share? I thought it was the specific shared folder, but that doesn't seem to be the case.
