I have Debian 6 installed on my netbook which I tend to spend more time at a command prompt then gnome so I would like it to boot to the command line with the same services as the default with the option to "startx"
I tried ->
Quote:
1. update-rc.d -f gdm remove
2, Updated inittab
id:3:initdefault: --> from default of 2
No luck.
I was trying to learn more about xorg configuration and came through an exercise that should be run at run level 3. So, I wrote init 3 in the command line then the x server stopped and the system was trying to enter run level 3 but then it hangs and nothing happens. At that time I was connected to the system via putty and wrote the command init 5 and the x server started again normally. I tried init 3 again and had the same thing.
View 4 Replies View RelatedI'm sick of screwing around trying to script a clean solution to burn multiple files and folders to CDs and DVDs with wodim, growisofs and genisoimage.I'm looking for a high level command line program that uses sensible defaults and takes arguments something like this:[program-name] [cd|dvd] /path/to/dir1/ /path/to/dir2/ /path/to/file ...It should then do all the low level copying and ISO generation transparently and just burn the damn disk!Does anyone have any suggestions? I've looked at several programs but it seems there are too many choices to trawl through and not enough information about them online.
View 4 Replies View RelatedI am looking for a tool that will tell me, in less than half a second, if the microphone is picking up any sound above a certain threshold. (I plan to then mute the Master channel with another command line tool, like amixer.)
View 1 Replies View RelatedWhat is the simplest way to boot to command line rather than gdm ?
I've seen post to change
# The default runlevel.
id:2:initdefault:
to
id:3:initdefault:
and
update-rc.d -f gdm remove
update-rc.d -f kdm remove
update-rc.d -f xdm remove
Just installed Ubuntu 10.04 LTS as a VM on MAC OSX. I want to auto boot to the command line, but the GUI keeps coming up. I ran "sudo update-rc.d -f gdm remove", but it didn't work.
View 8 Replies View RelatedI am following an instruction on the Internet to set up a timer=1. "You can force use of the timer interrupt by using the timer=1 module arameter (or oprofile.timer=1 on the boot command line" When I type "modprobe oprofile timer=1" at the command line, I got a warning message saying that "Deprecated config file /etc/modprobe.conf" So i want to try other way by setting it at the boot command line.
View 2 Replies View RelatedRunning Ubuntu 10.10. My desktop environment is screwed up and won't let me use the keyboard or mouse at the login screen. How can force a command prompt during boot?
Here's a method:
Alt-SysRq-e - Requests kernel kill all processes except init.
It used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?
View 4 Replies View RelatedI know that I can use the GUI (gnome-volume-properties) enable/disable the USB sticks/disks automount features, by checking/unchecking the pertinent options.My question is: how can I obtain the same results from the command line (that is, without using any GUI frontend)?
View 5 Replies View RelatedI have a nearly 10 years old iMac at home and installed Lenny on (somehow, I had to thrash Mac OS 9.2 :-P). Everything was successful until now, but on entering "startkde", the screen fills withkpersonalizer: cannot connect to X serverlines. Upon looking at other threads here I tried mdetect, installing X11... but to no avail
View 14 Replies View Relatedis there a way to set level of sound parameters (those you can set by running "alsamixer") at boot?Sound on my netbook is low. I fix that by running "alsamixer" and bringing PCM level to the max. However, as soon as I restart the system, low sound is there again, and I have to run "alsamixer" again. Any definitive solution?
View 5 Replies View RelatedOut of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View Relatedi've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedRunning 11.2, Is it possible to configure it to boot directly to a command line, outside of the GUI....as a default
View 9 Replies View RelatedIs there something I can add to my "menu.lst" file to give me the option to boot Ubuntu into command-line only without needing to edit system files every time I want to switch
View 6 Replies View RelatedDespite my best efforts to have them use debian or ubuntu server, a client wanted ubuntu 11 on the new server they built. It runs all the services I need it to, but would be nicer to have that server boot to command line. It seems nothing is going to work. I have tried:
1. changing /etc/default/grub to "quiet splash text"
result: blank screen
2. sudo update-rc.d -f gdm remove
result: no change
3. echo manual | sudo tee -a /etc/init/gdm.override
result: blank screen
Has anyone gotten Ubuntu 11.04 to boot to command line out there?
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
I have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
EDIT: sudo /etc/init.d/gdm stop worked, not sure why it did not before. Sorry for the whining!
I need to boot Ubuntu into a non-x, command line mode. So I can install an nvidia driver for my new GeForce GTX 260 (I had a GeForce 7900 running on my Ubuntu system using the synaptic open source 185 driver for nvidia, but there is no driver except the one I downloaded just now from nvidia's site for the GTX 260 card). That requires there be no X session running, not even in a separate domain so to speak. There is no rescue mode in Grub2. Recover mode in Grub still boots an X session (Gnome). Alt+F1 appears to be a clean command line terminal but even that does not work because the nvidia driver installer script sees through that ruse and knows there is an active Gnome session. I tried sudo /etc/init.d/gdm stop and that did not work. I tried ctr+alt+backspace and that did nothing.
What can I do? I tell you some days linux is just too frustrating, about to just toss the baby with the bath water and go back to Winblows. Bought a new graphics card today, and here I am stuck not being able to even install the driver from a command line prompt, geesh.
hello everyone, im having a problem when my computer enters in the run level 4 as the default when i start slackware. The strange thing is that it not seems that is a X window problem, it looks like more like a configuration problem in some part of the kde script to initialize the log in, because if i manually start the X service it works fine, i dont know what is the source. Thank you in advance for the help.
View 3 Replies View RelatedWhen I turned on my laptop today, instead of showing me the boot menu..it show grub command line..ie
Code:
grub>_
I have no knowledge about grub command line..still i tried to boot into my fc14 ..using these steps given here
[Code]...
Thus boot configuration files have been lost..i think I have to install Fedora again
i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.
View 2 Replies View RelatedI have used the below command to do that successfully for the previous version of ububunt, but this time I failed to do that with Ubuntu 9.10. I know I can do that manually by "sudo /etc/init.d/gdm stop" command. I try to change the name of /etc/init.d/gdm files, but the problem still exist.m"sudo update-rc.d -f gdm remove"
View 3 Replies View RelatedI just installed a fresh install of 9.10 on my amd64. when it starts it locks up right away. i know that this has to do with my nvidia card. i've had to do this in the past. but since it locks up i have no way to get into the command line. ctl-alt-F1 does not work. is there a way to just have it boot right to the command line without loading up gdm?
View 1 Replies View RelatedI did a clean install of Lucid from the alternate installer, onto a generic Intel/Celeron PC box. I used a command line only install, and used the entire hard disk; there's no other OS and no other partitions on the disk. Install goes along and finishes fine, reboots, and I can log in. But if I call sudo reboot, or shut down the machine then restart it, the boot process hangs. I see the POST screen, then a flashing cursor on a black screen for a few seconds, then the monitor goes into standby. I see no messages or any kind of output to the screen. I get the same problem using the Lucid Server installer and also when installing on a different box (Dell Intel/Celeron). I also tried running all the updates after install but before any kind of reboot...same thing.
This only seems to be happening using a command line only version of Lucid. Lucid GNOME/XUBUNTU install and work OK on both boxes. I can boot from a CD or USB key, but not sure where to look or what to check.
In dealing with the Nvidia Powermizer, I have to set it to "Prefer Maximum Power" mode from adaptive mode in order that I can avoid laggy in using my GUI. However, it doesn't save this setting so I have to manually tweak it everytime........
Someone on the web taught me to use the following command line:
nvidia-settings -a [gpu:0]/GPUPowerMizerMode=1
running it in the terminal it will set to the mode I want.
Would I be able to make my computer run the above command in terminal everytime it starts? I tried to put the command in the start up applications and it seems not working.
