General :: High Level Command Line Program For Burning CDs And DVDs?

Mar 12, 2010

I'm sick of screwing around trying to script a clean solution to burn multiple files and folders to CDs and DVDs with wodim, growisofs and genisoimage.I'm looking for a high level command line program that uses sensible defaults and takes arguments something like this:[program-name] [cd|dvd] /path/to/dir1/ /path/to/dir2/ /path/to/file ...It should then do all the low level copying and ISO generation transparently and just burn the damn disk!Does anyone have any suggestions? I've looked at several programs but it seems there are too many choices to trawl through and not enough information about them online.

View 4 Replies


ADVERTISEMENT

General :: Trying To Use Run Level 3 Through Command Line

Mar 30, 2011

I was trying to learn more about xorg configuration and came through an exercise that should be run at run level 3. So, I wrote init 3 in the command line then the x server stopped and the system was trying to enter run level 3 but then it hangs and nothing happens. At that time I was connected to the system via putty and wrote the command init 5 and the x server started again normally. I tried init 3 again and had the same thing.

View 4 Replies View Related

General :: Debian 6 - Run Level - Boot To Command Line?

Mar 19, 2011

I have Debian 6 installed on my netbook which I tend to spend more time at a command prompt then gnome so I would like it to boot to the command line with the same services as the default with the option to "startx"

I tried ->

Quote:

1. update-rc.d -f gdm remove

2, Updated inittab

id:3:initdefault: --> from default of 2

No luck.

View 3 Replies View Related

General :: Audio - Monitoring The Microphone Level With A Command Line Tool?

Jul 5, 2011

I am looking for a tool that will tell me, in less than half a second, if the microphone is picking up any sound above a certain threshold. (I plan to then mute the Master channel with another command line tool, like amixer.)

View 1 Replies View Related

Slackware :: Command-line CD-ROM Burning ?

May 8, 2010

I am currently using Slackware 13.0, but only installed the first 2 cds (no KDE nor GNOME).

I need to burn an iso to cd and searching on the web i found out that one can burn cds from a simple command line here: [url]

This is what i already did:

Quote:

View 14 Replies View Related

Ubuntu :: Burning A DVD Via Command Line Or Brasero?

Jun 10, 2010

I'm having trouble burning a DVD via command line or Brasero. The DVD Burner is the only IDE Device in the system. Although Disk Utility seems to display it as SCISI. Originally Ubuntu would only see the drive but do nothing when a DVD is inserted it. atleast recognizes the DVD now.

LSHW:

Code:
*-ide:0
description: IDE interface
product: MCP55 IDE

[Code].....

View 1 Replies View Related

Software :: Command Line Burning Of Audio Cd ?

Mar 22, 2010

I have very limited space on my netbook so i was trying to burn cds using only command line, i would like to use some program like mp3burn , i tried that one and other 2 similar ones but they are very old i think, i tried to make them work for a long time with no success mp3burn was the only one i could burn a cd with but the speed of the audio was increased. i know there are ways to do this using several commands but i rather have a script that does it for me i can burn data cds fine.

View 3 Replies View Related

General :: See All Installed Program In Ubuntu From Command Line?

Jun 16, 2010

How can I see all my installed program in Ubuntu from command line?

View 2 Replies View Related

General :: Ubuntu - Command-line Program That Switches Consoles?

Jun 18, 2011

For whatever reason, the "Ctrl-Alt-Fn" sequence has no effect on one of my Ubuntu machines; the sequence is interpreted as ordinary input. I need to get the system to a console because I'm trying to do a dist-upgrade and that's going to bounce gdm etc.

Is there some command-line tool that can be used to switch consoles? I have some vague distant memory of that being possible.

(I'm running Ubunty Jaunty at the moment. Yes I know it's old; I'm trying to march forward.)

View 2 Replies View Related

General :: How To Program The Command Line To Run A Piece Of Code Multiple Time

Dec 4, 2010

So, I usually write/find a test case generator for any code that I write. This type of code generally leads to some file output. To be thorough, I try and generate many different files to test my code on.

Say the command is like this:

Is there a way to automate this for many different values of the parameters and generate many different files?

I tried:

I wasn't able to use the $i in the filename, and without it the command gave me no errors, but did nothing else either. I know the Unix command line is very powerful, and I have a feeling that this should be possible, but I just don't know how to do it.

View 3 Replies View Related

General :: CentOS Command-line Program To Randomly Change MAC Address?

Nov 7, 2009

OS: CentOS 5.3 Enterprise Server
Red Hat Nash Version 5.1.19.6

I need to find a command-line program to randomly change my MAC address. I know on Ubuntu there is a program called 'macchanger'. And on Windows another one called 'macshift'. I just can't find one for CentOS 5.3 Enterprise Edition.

View 3 Replies View Related

General :: Command Line - Unix - Program That Can Handle All Popular Compression/archiving Formats - E.g.tar, Gzip, Bzip2, Zip?

Jun 22, 2011

I sometimes get confused by the varying command line options I need to run common Unix archiving and compression software (e.g. gzip, bzip2, zip, tar).

Is there a program out there that can just Do What I Mean for common cases? For example:

View 2 Replies View Related

Ubuntu :: Burning Dual Layer DVDs?

Jan 15, 2010

What is a simple Dual Layer DVD burning for 32bit Gnome Ubuntu 9.10?

From what I hear Brasero doesn't support it yet. I have heard of GnomeBaker & k3b.

I want a good one that also has PPAs to add to the sources.list

View 1 Replies View Related

Debian :: Burning CD / DVDs With Brasero - Error Messages

Dec 17, 2010

Does anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.

View 3 Replies View Related

Debian :: Comparing Contents Of Two DVDs - No Burning Errors

Apr 28, 2010

How to compare the contents of two DVDs, for example using the MD5-fingerprint, if all data was exact copied and no burning errors?

View 11 Replies View Related

Ubuntu :: No High Level Format For LS-120?

Nov 29, 2010

I'm running 10.10, but this seems to be an ongoing problem. While every other OS on the planet seems to be able to high level format LS-120 super floppies in their IDE drive, Linux can't. DR DOS can. OS/2 can. Windows 98 forward can.

We aren't talking low level format here. We are talking "quick" format where a new FAT and label are written to the media along with the high level markings/surface scan.

I can load a disk, copy to it, delete from it, but cannot perform a high level format.

View 3 Replies View Related

SUSE :: 10.0 - Low Volume On High Level

Apr 15, 2010

Running Suse 10.0 on a lenovo idea pad and I am having a problem getting the volume set high enough to hear any music, dialogue!. I have set the volume control up as far as it will go but can hardly hear anything. Had this problem running Ubuntu on a Sony laptop but managed to resolve the problem but cannot remember what I done.

View 2 Replies View Related

Ubuntu :: Box To Run A Command Line Program?

Sep 19, 2010

I have just installed pdfocr. Unfortunately it does not have a gui and so in time I will forget how to use it or not remember I have it.

Is there a simple generic program that will browse to where the file is and then run the command line? I suspect python will do it. Could someone point me to a suitable tutorial for this purpose.code...

View 2 Replies View Related

Ubuntu :: What Command Line Program Should Be Used

Jul 6, 2011

I am going to do a web based search for several thousand webpages which may or may not exist. I just want a list of the addresses which work. I dont want to load into firefox, and I'd preffer not to ping the url. I just want to test the URLs for validity and kick back a list of good URLs.
Any Ideas on a simple program to do this, which I can use in a bash script?

View 2 Replies View Related

General :: ImageMagick's "import" Command Line Program Failing To Take A Screenshot From CRON Script

Feb 16, 2011

I wrote a simple command line script which is suppose to take my screenshot every 5 minutes.(using ImageMagick's "import" program)

Here is the script (shottr.sh):

This is working fine if I execute by hand i.e:

The script itself is being executed (I hear a voice saying: "Screenshot") but the actual screenshot is not taken.

Be assured that it is NOT permission issue (I placed a simple "touch" invocation and file was created)

May be if it's run from cron...it doesn't have a "window" so it can't take a screenshot from nowhere? If that is the case, then how can I workaround it?

View 1 Replies View Related

General :: Program - Copy/burn DVDs?

Jun 22, 2010

What program will copy/burn DVDs? I also make some data DVDs,so where can I get a good program to do these tasks?

View 4 Replies View Related

Debian :: Install A Program Using The Command Line?

Jan 29, 2011

I tried to install Vlc using the terminal (terminal as root). I've used the command aptitude install vlc. Instead of installing only vlc, my gnome desktop environment was removed, gdm was removed, many more programs was removed! What's the command for installing just a single program using the command line? I was used under Ubuntu to use the command sudo apt-get install [***]

View 14 Replies View Related

Fedora :: Using Built In Command Line FTP Program?

May 13, 2010

Any relatively easy user guide for the built in command line ftp program?

View 10 Replies View Related

Ubuntu :: How To Run A Python Program From The Command Line

Jun 14, 2011

i have ubuntu 10.04 and python 2.6 installed how do i run, stop or restart a .py file from the command line.

btw im using Putty from a windows computer

View 1 Replies View Related

SUSE :: Unable To Get A Program To Run From The Command Line?

Nov 9, 2010

I have reinstalled Suse 10.1 as dual-boot with Windows XP. I am now unable to get a program to run from the Linux command line. I am familiar with the program and have had it running previously when the machine was Linux-only. Everything else, e.g.Firefox and Office, work fine in Suse.

[Code]...

The problem occurs with all commands - not just this one. isis3Startup.sh is in green on the screen so I assume I should be able to run it - I have never had any problem when it was installed previously.

View 2 Replies View Related

Software :: Command Line Program For IP Calculation?

Apr 8, 2011

ipcalc isn't the one I am thinking of. I remember another one that was a bit better, with more options -- easier to use.I remember that if you gave it a CIDR network /23 and an IP, it would list all of the address ranges, network, broadcast for that network..

View 2 Replies View Related

Programming :: Program That Activates A Command-line?

Feb 7, 2010

I am wanting to write a program that runs a program or command-line. Is there are way of making a program that activates a command-line (for example executing 'ps -a -f' or '/home/shared/fah').

In addition to that, I want the program to do a 'ps -a -f' and put the results in a buff, how could I do this.

View 5 Replies View Related

Software :: Open Source Dvd - Cd Copy Program - Burning On The Fly Program?

Dec 14, 2009

Is there anything like burning rom from nero or roxio cd/dvd copier. Do you know of any dvd copying program? like without making the image and then burning with just one process just copy the disc sorta program like roxio dvd copier? I wanted to make copies of movies I made a dvd of but aside from image burn which is a hassle to make the image first. is there something for burning on the fly or dvd/cd copying? infrarecorder and cdburnerxp do not work for me at all.

View 3 Replies View Related

Debian :: Any Program To Send Mail From Command Line?

Sep 9, 2010

Is there an easy to use program that I can use to send mail from the command line? I want to be able to create a batch script to send mail from different text files. What I'm looking for is something like:
mailapp mailserveraddress destinationmailaddress mymailaddress filetosend

View 11 Replies View Related

Ubuntu :: Difference: Run Program From Rc2.d Or From Root Command Line?

Mar 26, 2010

Example: In rc2.d I have S99test. In it: Code: #!/bin/sh mplayer -playlist "/music/Thom Yorke - The Eraser" Reboot; hear the loveliness; press pause (lirc setup)...still loveliness.

Login as root; "pkill mplay";hear nothing; "/etc/rc2.d/S99test"; more loveliness; press pause...silence! I know that i the former case, mplayer is assigned (for lack of a proper term) to a session, e.g. tty1. Not so in the latter. But why should a program like mplayer not receive (or ignore?) input from lircd, simply because it doesn't have a session? And how can I get mplayer (or any program run from boot scripts) to work with other programs (like lircd)?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved