General :: Copy-paste From Editor To Command Line?
Dec 23, 2010
I am trying to upgrade PHP on our linux box ( CentOS ) I copied the configure command from the phpinfo and now I want to execute that.I am not able to copy the command from an editor in linux to the command prompt, clicking the wheel om my mouse does not work, neither does shift-insert or ctrl-shift-insert.It does work in the editor itself.Is there a way to do this ?Or is there a way to execute the command in linux while it is in the file ? Like a bat file on Windows ?
I am trying to copy paste from a file in Nano to a text editor outside of nano on my machine (I am running windows using Nano through Putty) and I cannot figure out how to do it. I can select with mouse support enabled everything that I want to in Nano and I can cut it, but when I try to copy into my other text editor, it does not work.
I'm trying to view directly a partition with a damaged filesystem on it (NTFS) and so far the hex editors I tried do not do that. I tried GHex for example and it complained that /dev/sda is not a file. The partition is unmountable as NTFS however since it is damaged so I couldn't mount it first. Are there any hex editors out there that would allow me to view the contents directly and copy and paste stuff in there?
I have a 500G HD with several partitions. I have just added another exact 500G HD and would like to copy the partition table from the first HD to the new HD.What is a good command line partition editor to get the job done? All of my partitions are ext4. I have looked at parted but the man pages says it does not support ext3, so I guess it will not work with ext4 either.What I am ultimately going to do is to set these two HD in a RAID0 configuration without having to re-install Karmic.
I need to copy all subdirectories and files from one directory to another ever 5 minutes or so, with the old data automatically being overwritten with the new data. I'd also like this to run at startup. Is there any way this can be done? If so, what program would I need to schedule the automation and what is the command line I would need.
I want to change the default command line editor from vim to nano, so for example when I type "visudo", I want it to user nano. In Ubuntu this can be easily done by using "update-alternatives --config editor", but openUSE doesn't have an editor-option
The usual vim yank and paste works only in the same window (but does work across files and close/save commands). Is it possible to make it work across terminals (yank from window in one terminal and paste in another) and if so, how?
I'm using SSH (with -X specified) from a Ubuntu box to a RHEL4 box and running GVim. It opens as expected in my local X, but the copy and paste via select doesn't work. I cannot select text in GVim and paste in a local window, nor can I select text from a local window and paste in GVim. This works, however, when I SSH (with -X specified) to a different RHEL4 box. Is there something I need to install on the remote machine? I am running Parcellite 0.9.2 on the local box, but closing it doesn't make the problem go away, and it is not interfering with the other box.
I'm using a work computer so i don't have a root access. I've tried "+y, "*y, set clipboard=unnamed. It looks like my vim doesn't support +clipboard (version 7.0).I'm using Linux Centos 5 so fakeclips doesn't actually help (i think)It's a pain to type stuff manually from firefox to vim or other apps and vice versa.
I just installed Fedora11 with the KDE desktop and completed a yum update. Every time i try to copy and paste files and even delete files from a file manager or my desktop, I get this error:Quote:Could not start process Unable to create io-slave:klauncher said: Error loading 'kio_trash'.or thisQuote:Could not start process Unable to create io-slave:klauncher said: Error loading 'kio_file'.orQuote:Could not start process Unable to create io-slave:klauncher said: Error loading 'kio_desktop'.Current KDE version is 4.2.2
just installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
I am having a strange problem whenever I copy something from a webpage I see content more than required copied and I then have to manually go and delete all the content. This has been quite frustrating. I am using Ubuntu 9.04 and Dell Inspiron 1440 laptop. What should I check?
What is the best way to copy and paste some text among text documents in Linux terminal environment? Suppose I have 2 documents, A and B, and I want to copy some part of A to B. What is the way to achieve this?
I often have issues starting my window manager--xfce. My computer misbehaves in one of 3 ways, one of which is to fail to open X, but generate several screens of info. I want to paste that info to this site, but since I'm in the shell, not the terminal (please correct my vocabulary if it's wrong here), I don't know how to copy and paste the output, since right-clicking doesn't give me a menu. Even if I could copy I'm not sure the information would be accessible in X. Are there any other options?
I am using Ubuntu 10.04. I want to disable the cut, copy, paste options in the Edit menu when my system is connected by rdesktop. I want to make a write/copy protected session in the rdesktop. I have disabled the keybord shortcuts like Ctrl+X ,Ctrl+V, Ctrl+C by disabling their Keysyms in the rdesktop code. Now I need to disable the options in the edit menu.
I'm looking for a way to copy files with a certain file extension over to another folder. For exampleSource Folder: /home/user/downloadsFile Type: *.epubDestination Folder: /home/user/epubs/The downloads folder has several folders that may go as deep as 2 or 3 levels.I tried this but it didn't seem to work (and I'm not really sure what to do to modify it to get it to work).Quote:find . -maxdepth 1 -type f -exec grep -q "pattern" '{}' ';' -exec cp '{}' /path/to/destination
Lets say I log in to bash, open a file in vi, then using alt-f2 I open a new terminal. After logging in I navigate to a second file and open that in vi. How can I CnP between these two files?
I found this from [URL]. I'm not familiar with this command shift-8-y-y. I follow the vimtutor and use virtual mode. I tried this sequence and was unsuccessful.
And, I read this about registers. I found a mention of using double_quote-p to 'put' or paste the register, but this does not work in a different file. The second file reported the register empty.
Alternatively, I read in the VIM docs, it is possible to open multiple files under split screens. This may be a course to a solution. The need I often encounter has me navigating in a different bash window to find a file, then wishing to copy between the two. Whereas, I imagine, a split VIM window useful for files in the same directory.
I installed Slackware 13.37 current 32 bit (kernel 2.6.38.7-smp) last saturday and almost everything works fine. I don't understand why I cannot use Ctrl-Ins and Shift-Ins shortcuts for copy and paste in console terminal. Shortcuts works fine in X terminal (fluxbox) Konsole... but they don't in text console.
I just maked an ext4 partition by the help of gparted. Ubuntu is my only OS no dual boot. Using Ubuntu Maverick. The problem is partition must be open as root to do any work else it wont even allow me to open file,create folder,cut copy paste or anything.
Ubuntu is getting stuck at the loading screen after an aborted attempt to upgrade to 11.04. It's my own fault - the install was running out of room on /, and I, like an idiot, decided to delete some package files under /var/something/archive, thinking they were "old"... I quickly realized they were in fact the new packages being installed... anyway after killing the thing and rebooting it is pretty damn broken (mostly because I can't get networking going so running in dpkg repair mode doesn't do much because, well, I deleted the packages).
I want to copy all the files off my /home and other meaningful partitions onto an external drive so I can just do a clean install. I can actually login to the command line under recovery mode, but I can't get the GUI started. I know it's possible to copy the contents of the partitions to an external
Fresh install of openSUSE 11.3 here and I am used to launching Konqueror as root from the CLI and having a cut and paste editor to use. This doesn't work in KDE 4.4. I can't launch kwrite from the cli as root. What am I supposed to use? I installed midnight commander but it can't cut and paste correctly. I am feeling a bit frustrated with KDE 4.4.
My xfce4-screenshooter GUI has the option Copy to the Clipboard, but I could not find this option in its' cI'm trying to bind printscreen key with this. I know that in order for the option to work I need to have the application always running (in GUI thre is option Close the application after screenshot , again somenthing that I can not find in command line).
I want to copy file from the Server cd drive and USB drive to the server root directory, but I haven't find any command of listing the cd drive or usb drive.
i'm used to using putty on a window's machine.With putty whatever you select is automatically on the clipboard without having to right click and select copy.And right click just pastes.
