General :: Copy Folders From Windows Machine To System Script?
Oct 7, 2010I'm looking for a script to run that will be run from my linux box to copy folders from a windows server at a certain time on a daily basis.
View 2 RepliesI'm looking for a script to run that will be run from my linux box to copy folders from a windows server at a certain time on a daily basis.
View 2 RepliesIs there any way to share folders in linux machine to windows machine except samba and ftp..
samba is blocking by the hosting company.
I need a command-line method of copying files from a Linux box to a Windows machine that is in a domain and requires authentication. I cannot install additional software or services on the Windows XP machine. I can install any software on the Linux machine. I've tried scp, but the connection failed and if my understanding is correct it is because scp requires that the target (windows machine) be running an ssh service. Is there a command-line linux utility that can pass Windows domain user and password and then copy a file from the linux machine to a share on the windows machine?
View 1 Replies View RelatedI have an account in university on Linux machine with 10TB of free space accessible via SFTP. I would like to backup my Windows 7 x64 laptop to university. Currently I am using rsync+cygwin, but backup is pretty slow (without shadow copy) and I hate console window appearing every day on my screen when I login.
So I am looking for something like Windows Backup but with support for SFTP. Combination of tools will work too.
I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View RelatedI have a computer running Ubuntu 10.10 32-bit with Gnome and another computer running Windows 7 64-bit. How can I share folders between these? I can use Samba to view my Windows shares, if I specify the IP address by going to the "Connect to Server..." option in the Places menu. Going to "Network" in Nautilus and trying to open "Windows Network" fails because it could not retrieve the share list from the server.
MY question, though, is how can I set up Samba (or some other software) such that my Windows box will be able to see my shared folders? And also, what is the difference between Samba and Samba4 (because both are in the repositories).
I am new to Linux.I have installed dual boot, XP(NTFS) and Enterprise Linux Server on same desktop.Now how can I access windows files & folders from Enterprise Linux Server?
View 4 Replies View RelatedI am running some Pcap files through editcap and then tshark. I am running fedora 11. This will create a couple of thousand text files all numbered sequentially 1-x. How can I copy these files across a network(I connect using putty) or how can I copy them onto an external HD so that when I view them on the windows machine they have the right formatting (Windows know to open them with wordpad/notepad) basically that windows knows that they are text?
View 11 Replies View Related1. I need a script(like a scheduled cron job) which should perform Automatic copy (backup) of a directory from ubuntu server to windows and vice versa....
i tried every thing like samba mounting,ftp,etc..with samba its possible to map the network drive of an ubuntu directory in windows..but if the ubuntu server is not available then i cant access the network share..
Exactly this situation is happening for me while backing up tmp directory of ubuntu server ...
so in this case i need a permanent backup of tmp directory of ubuntu server in windows rather than a network share.
2. Also any ideas or scripts regarding automatic ftp (while doing a backup) from ubuntu server to windows... which can easily solve the above issue...
I configured Samba so that this laptop running Maverick would show up on the network so I could share files between the two. When I view the network on the laptop the windows shares show up, and I can access them; but when I view the network on Windows is when the problems start.
I view the network in Windows and this laptop shows up, but every time I try to open the Public folder (only folder shared) it won't let me in. I get some sort of Windows error message about being unable to access the folder and how I might not have permission to access it, and then at the very bottom it says something like 'file path not found'.
I tried to change the permissions in the properties for my public folder but I every time I tried to change the settings in the access box it would reset it back to blank (-) immediately after I changed it.
I'm not sure what the issue could be. Prior to purchasing this new laptop I was running Karmic on my old laptop and the networking between the two machines worked flawlessly. I'm hoping someone on the forum can help me with this problem.
I am using virtualbox to run windows xp.is there a way to access the harddisk occupied by linux and copy the information to the virtual memory in windows xp
View 3 Replies View RelatedI am trying to share folders between my laptop and desktop. The desktop runs Ubuntu 10 ,and the laptop I'm dual-booting between pclinux OS and another OS. I can't see either machine from either machine. The desktop shows a "windows network" when I go to the network location in file manager. When I run PC Linux, I can't even see the desktop which runs Linux as well, and I've tried to configure shares in the PC Linux OS Control Center, but I obviously failed. I installed gshare on the Ubuntu machine, and PC Linux has GUI tools(whew!) to configure NFS, SMB, and Deb-whatever the other one's name is. As a new convert, I've went into properties,permissions, because it's what I'm familiar with. I just wish someone would tell me if I should maybe just go back to the other OS or not, as I've had so many problems every since trying the switch. I really like this system, but it seems as if you need to be some kind of computer programmer or something to be able to do the most basic things (install software,wireless,share files). I'm not a stupid person, and what I lack in knowledge, I compensate for in desire to learn.
View 2 Replies View RelatedI am looking for a way to see if it is possible to copy the system state of a system to another system.Is it possible to simply move the folder structure over to another machine, and have it work? Do I need any special partitions for /var, /home, etc?My machine is dying slowly, and I really want the quickest way to migrate the system over to the new system.
View 7 Replies View RelatedI've come across this rare issue, I have a friend that uses some software that is particularly slow in Windows 7, the best compatibility is in Windows XP, I told him to make a partition and have both OSes in the computer, at which he replied: "Could I have a different OS for each user?", it seemed like a good question to me, so is that possible?, suppose that I login and it boots me to Vista, then I loggout and Linus Torvalds comes and logins and boots him into Ubuntu, he gets bored and logs out, afterwards my friend comes and logs in, booting into XP, summarizing:
The operating system that will be loaded will depend on the user that logs in.
I want to make a script which will copy the certain data from Linux machine to Windows machine.
Can u please give me some help in how would i go about it?
I am setting up a mail server on debian. Once it's done, I'd like to have an indentical server on another machine, where debian will also be installed. The solution has to be hardware agnostic, so source machine is different than destination machine. I was reading on some wiki page that one can simply copy the root filesystem via rsync to the computer that he'd like to install the system on, then chroot to it and test if everything works. I'm guessing I'd have to change a couple things before, like :
- The network config
- The /etc/fstab file (disks and partitions may be different)
This article is about using rsync to transfer a copy of your "/" tree, excluding a few select folders. This approach is considered to be better than disk cloning with dd since it allows for a different size, partition table and filesystem to be used, and better than copying with cp -a as well, because it allows greater control over file permissions, attributes, Access Control Lists (ACLs) and extended attributes. [1]
I have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
Im trying to setup samba so that i can copy some files from my windows 7 machine over to the drive on the opensuse machine running 11.2. i believe i set everything how it should be set up but no matter what i do i cant write filesfrom the windows machine. Here is my smb.conf
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2009-10-27
[global]
[Code]...
How can i copy a files from Machine A to Machine B.Which is LAN connected
View 4 Replies View RelatedI am developing a Web-based application and have some folders that will generally reside outside of the Web accessible area of the server. However, since some people will not be able to store those folders outside of the "public_html" folder, I am looking to put a blank "index.php" inside of every folder within that section of the application. To make things easier, I would like to know if there might be a way to recursively copy one file into every folder in a certain location.
In other words, is there a command that might do something like:
Code:
> cp -R index.php /home/user/public_html/source-files/*
Basically, I want every directory inside of "source-files" to get a copy of "index.php". The directory hierarchy within "source-files" can go at least three or four levels deep, so the command would need to be recursive. I am looking for a command-line statement that I can type to perform this action.
At the moment I'm using:"cp -ap . /destination-folder"to copy everything from the folder I'm in to another folder.That works.Is it possible to cp everything except:folder1/folder2/in the current folder I'm in?
View 2 Replies View RelatedI recently replaced my windows fileserver with one running Ubuntu. One thing I've noticed (which is a annoying) is that when I copy files between two samba shares from my windows machine, it copies the file through my PC to the new destination. On windows shares it just did some sort of local copy (ie it took about 2 seconds) rather than 3-4 minutes. Is this the normal behaviour, is there any way around it on Linux
View 5 Replies View Relatedjust installed ubuntu couple of days back on my netbook. I am still a beginner, enjoying my adventure exploring ubuntu. I have another desktop which runs on XP. I am able to access XP shared folders through my netbook(linux). However, i wanted to copy files from XP infact folders using TERMINAL in my netbook, not copy and paste using my mouse. Are there any commands for it?
View 1 Replies View Relatedi have a folder with symlinks:
marek@marek$ ls -al /usr/share/solr/
razem 36
drwxr-xr-x 5 root root 4096 2010-11-30 08:25 .
[code]....
i want to copy it to ~/solrTest but i want to copy files from symlink as well when i try to cp -r /usr/share/solr/ ~/solrTest i will have symlink here:
marek@marek$ ls -al ~/solrTest
razem 36
drwxr-xr-x 5 root root 4096 2010-11-30 08:25 .
drwxr-xr-x 358 root root 12288 2010-11-26 12:25 ..
[code]....
I wanna copy all folders and files created from 01.01.2011 until today to new placeie:cp -r /home/moviecar/public_html/wp-content/uploads/ /home/teaser/public_html/wp-content/uploads
View 4 Replies View RelatedI am attempting to copy a set of sub folders from their multiple parent directories to a new location.
For example, I have three folders to copy:
I would like them to be copied to:
In actuality there are many folders besides folder1, folder2, folder3, and no numerical order exists. So, the folder named 'photos' would be copied to its parent folder's name in a new location. I would need this to occur for all folders in the '/home/user' directory.
I want to make the script to copy all folders which older than 7 days from Linux server to Windows server by Samba. And make it automatically by using cron
View 4 Replies View RelatedI inherited a machine that's set up with 3 disks, managed by LVM (v 2.02.46-RHEL5). I just got a new box with the same hardware configuration, and would like to clone the disk setup by copying an LVM config file from the first box to the second, and have LVM on the new box set up the disks according to that same configuration. Is there a way to do this?
View 2 Replies View RelatedI used the command: scp filename.c user@172.100.102.187:/user/pradeep
Here I want to copy file to 172.100.102.187 in /user/pradeep but it gives a
error: scp: /user/pradeep: No such file or directory
What is the command to copy a file from one system to another?
I am unable to copy files on my machine. For instance, if I have two folders on the desktop and I want to move one folder into another, I get the error message:Error "Not on the same file system". I am using SL5.4.
View 1 Replies View Related