I installed Kubuntu 9.1 and then I downloaded Xampp of Linux to the desktop, however I have to extract it to /Opt/lampp. And that's the problem. I don't seem to have access or permissions to ?? I tried right-click | properties | permissions but the fields are greyed-out to make any changes.I am logged-in using the same user id/password I created when installing K9.1.
View 14 Replies
Is there a way to recreate all the folders from one directory to another without copying over the contents of the folder? I've been trying to do something like this,
Code:for i in `ls $X`; do mkdir $PATH/$i; doneUnfortunately $i is deliminated by whitespaces in the filenames and not the actual folders.
$X contains only other folders so I dont have to worry about regular files but any kind of more "advanced" solution would work.
i need to copy files from a folder called output files to another folder called running but im not able to do it i always get a stat error
View 14 Replies View Relatedi want to copy one folder to server using terminal. iwant to copy datatable folder to server. it like this:
copy from
user: /home/qa/html/datatable
to
server: www/html
how to do that...i'm new about this..i try like this:
1> qa@qadesktop2:~$ ftp 10230.35.211
2> fill password
3> ftp>cd www/html
4> ftp>mput
(local-files)/home/qa/html/dataTable-1.6/*
I downloaded the bin file, and installed it but I haven't realized that I made the folder in the current directory. I would like to install in /usr/java.
Can I now just copy paste it there. Or I need to re-install to desired location I installed JRE , is that ok or I need to install sdk
I'm trying to copy a list of files except the files which has ".log" in the filename to another folder.I can run it correctly when I am located in the Source folder, but not when I am in any other location.cd /home/me/Sourcels /home/me/Source -1|grep -v "^.*log$" |xargs -n 1 -iHERE cp -r HERE /home/me/DestinationHow can I indicate both Source and Destination Folder?
View 2 Replies View RelatedI am trying to use the cp command to copy some files around but want to preserve the entire folder structure. Example:
Then within the /backup location I want to see /backup/folder1/folder2/file.
I have tried cp -a and cp -p but neither give me the above.
sudo cp ../../../rootfs_maker_ramdisk drivers/filesystem/ -rf
give below errorCode:cp: cannot create special file ...._rootfs/dev/hda4': No such device or addressi get this error only in some specific locationsif i dont use sudo then i get permission denied msg
i want make a bash panel and i want he will copy files from orginal folder to $user folder i mean when for explame i type i want install some server he say cp: cannot stat 'root/Desktop/2/files/beckup/sa-mp-steam': No such file or directory.
View 6 Replies View RelatedI have 500 folders of templates in one folder. Now each folder has file called template_thumbnail.png . now i want something so that all those files get copied to one folder with name same as the home folder name
I have cygwin installed and i can copy that folder in there so basically it will linux shell script
How to Copy the entire folder contents (including sub-folders and their contents) to another folder using PUTTY? Is there any command for that?
View 3 Replies View RelatedThe reason I ask is, we have a home server running Fedora 12. I would like to be able to let anyone just plug in a flashdrive, and have Fedora automatically grab and copy all the files on that flashdrive to a specific share.
View 1 Replies View RelatedI own a web server (centos 64bit with cpanel on it) and my datacenter add me a second hard disk and i want first to locate from ssh where is it (the path) and then to copy my mysql folder /var/lib/mysql to the new disk and have it like this /new/mysql on the second disk.
View 8 Replies View Relatedmake a simple script to copy files from my "hfiles " directory to a "www" folder at leats I think its a directory, it has the permissions as "lrwxrwxrwx " but its like a public branch So I proceeded to make a file entittled MkPublic to copy the "hfiles" directory to the "www" branch
here is the code i used:
#!/bin/sh
# COPIES FILES
echo "copying files"
[code]....
when i try to run the script it tells me that there is a syntax error and an unexpected end of file and nothing seems to get copied anywhere so clearly there is something wrong with one im doing, i tried multiple ways : using the quotes, spacing the equal signs, but I seem to still get the same results.
When i want copy a file or folder in some system folder like sbin,Etc.show me error about privilage but when I'm in console i use su command for become admin and i can copy my file or folder.in other operation system like windows user can copy anything,i want know for direct copy my folder in linux without console what should i do? i must join my user name in root group?
View 4 Replies View RelatedI just maked an ext4 partition by the help of gparted. Ubuntu is my only OS no dual boot. Using Ubuntu Maverick. The problem is partition must be open as root to do any work else it wont even allow me to open file,create folder,cut copy paste or anything.
View 9 Replies View RelatedI have written a script.
#/bin/bash
a=`du -sh /root/samplefolder | cut -f1`
echo $a > testfile
[code]....
The aim of this script is, when the folder reaches 20M then attributes will be set to that particular folder so that no newfiles and folders cannot be created or copied to that samplefolder. whenever i copy a file morethan 20M to that folder its getting copied fully and then the attributes were applied. But i dont want this to happen, when the folder reaches its maximum current write operation to that folder should be stopped automatically with a error.
I should know this but I figured I'd ask before I screw something up.
What is the command to cp just and only the contents of a folder, not the folder itself, into a new folder?
Code: cp -R /path/to/folder/ /to/new/folder/
Is this right?
I have many files and folders in my source folder. I want to copy some files and folders from that source folder to destination folder. What should be require to given with the "cp" command?
View 1 Replies View RelatedI have been sitting here practising linux commands and I cannot seem to copy a picture from home/pictures to the desktop, specifically a folder I created on the desktop "test"
View 4 Replies View Relatedi have a folder with 250 subfolders and each one of them has (at least) one image in it (along with other stuff)how can i 1)copy all the images from those subfolders and paste them into one folder together (other than by hand, obviously)?2)optional : copy only the images of a certain size and above?
View 2 Replies View Relatedlately, after shifting to 10.04, when I copy files from the Ubuntu to my XP shared folders, it goes very very slow. i restarted the router and nothing changed. I can see the folders, but the copy speed is still very slow.
View 2 Replies View Relatedi was reading on how to do scheduled tasks, however i couldnt find anything that was a scheduled task to copy a whole folder to a NAS(Network Storage) thats linked on my ubuntu desktop every 4 hours or so.
View 1 Replies View RelatedFirst off I'm running a headless Ubuntu server 10.10 box.I have a single folder on a ntfs drive that I wish to copy somewhere else on the same HD. I'd like this to automatically happen about once a week or so. It would be even better if it would tarball the copy also..but this isn't a 100% necessary.
Something like "XFOLDER" would be copied to "/backup/XFOLDER1.tar" then next time "/backup/XFOLDER2.tar" and so on.
I am doing my web radio project. i hav the exact code for the application. It needs sland and newt libraries to be installed. I installed them succesffuly. but when i compile the code it is showing number of errors. actually i hav to copy the libnewt.so file into /usr/lib folder. when i copy tat file it is displaying error as permission denied.
how to copy that file in to that folder. and tell me the stteps to install newt on fdora core 9.
the errors displayed when i compile the code are
[root@localhost newt-0.52.4]# cc -Wall -I/usr/include/slang -D_GNU_SOURCE -g -c -o setup.o setup.c
setup.c:4:18: error: newt.h: No such file or directory
In file included from setup.c:10:
newt_pr.h:20: warning: enum newtFlagsSense declared inside parameter list
newt_pr.h:20: warning: its scope is only this definition or declaration, which is probably not what you want
[Code].....
Just wanting to know if there is a program or script or something I can use that will automatically copy all my files from a flashdrive, to a predetermined share, whenever that flashdrive is plugged into the server.
View 1 Replies View RelatedI had Fedora 7 and Windows-XP dual operating system. Few weeks ago, there was GRUB error. Now I want to install Fedora 14, but before it I want to back up all data in one external hard drive. I used Fedora 13 live-CD I could access all the drive formatted as NTFS, but I couldn't access /home and the drive formatted (ext2) and owned by the user-name.
Please, inform if there is any idea to copy my files that remains in the home folder. (I can see them but copying is prevented)
I am using Fedora 14, I need to change the directory of a folder(myweb) from "homeuserdesktop" to "varwwwhtml" . Please give the Fedora commands to do this.
View 2 Replies View RelatedI need to copy a file from my desktop to a system folder but unsure how. It needs to go to the "etc/X11" folder
View 6 Replies View Relatedi'm confronting atm. I need to create a folder where ppl can copy files and i need to be sure that those files cannot be deleted after they are copied there. The folder will be accessed over network, and i need to be sure no one will delete somebody else's files.Also i need to tell you that i'm working with regular users, so creating a folder for each user and chown/chmod-ing it won't do the trick(allready tried and ended up with a whole lot of files in the parent directory).I also tried chattr +a but that doesn't allow them to write new files in the folder.
View 2 Replies View Related
