General :: Add A User In Sudoers File
Oct 4, 2010How do I add a user in a sudoers file.
View 6 RepliesHow do I add a user in a sudoers file.
View 6 RepliesI need to install a package. For that I need root access. However the system says that I am not in sudoers file. When trying to edit one, it complains alike! How I am supposed to add myself to the sudoers file if I don't have the right to edit one? I have installed this system and only administrator. What can I do?
Edit: I have tried visudo already. It requires me to be in sudoers in the first place.
amarzaya@linux-debian-gnu:/$ sudo /usr/sbin/visudo
We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for amarzaya:
amarzaya is not in the sudoers file. This incident will be reported.
amarzaya@linux-debian-gnu:/$
How do I add myself to the Sudoers File? When I go to use the "Sudo" command, it tells me I am not in the Sudoers File, so I have to do "su -" to bypass it for the time being. How do I add myself?
View 12 Replies View RelatedHow do I add user xyz to sudoers?
View 1 Replies View RelatedI have a bit of a problem... I thought (for certain reasons) I would just add myself to root group and therefore gain some more rights for my account. I could sudo before... But once I gained the root group as a secondary group it says I am not in the sudoers file anymore...
Code:
id
uid=1000(kosta) gid=1000(kosta) groups=0(root),1000(kosta)
Code:
sudo ls
[sudo] password for kosta:
kosta is not in the sudoers file. This incident will be reported. It is really weird and messed up. I can view sudoers file but not edit it... I can cat passwd but I can not view syslog. Is there any way to fix this without having to reboot to recovery mode? And why the heck is this happening after all?
I wanted to do an installation from my user login so I typed
sudo make install
then it says
<my_user_loggin> is not in the sudoers file. This incident will be reported.
How to correct this matter...
I get this message if i try to use sudo/gksudo. What causes this, how can I solve it? It has been working for years. If i remember correcttly there was a sudo update few days ago, maybe it doesnt work since then, i havent used it in the last few days.
View 9 Replies View RelatedSuddenly I am not in the sudoers file. I am not sure how to recover from this. I have no grub screen at bootup, so I can't boot into single user. I think I am going to have to boot a live version of ubuntu to start with. Is that right? What's next after that? Also, how could this happen, I haven't touched the sudoers file or added users or anything like that (well not that I am aware of) I am a little concerned that this may be the result of someone breaking in? Would this be a likely symptom?
View 3 Replies View RelatedI just installed Gutsy server. It is the only disk I can get to boot on this old PC trying to salvage. I'm at the "SERVER LOGIN" prompt. I created one user during the install. I can login as that user, but that user has "...Is not in the SudoersFile." How do I setup this user to be in the sudoers file, without having any ability to make changes to the system?
View 5 Replies View RelatedI'm running Ubuntu Server 11.04. It came time to add User to the sudoers file: so I decided to simple add User to the admin group: usermod -a -G admin user Then I used visudo to check if admin users had been set to receive sudo privileges. I uncommented the line admin ALL=(ALL) ALL. Nothing happened. I've even tried to add user directly into the sudoers file as user ALL=(ALL:ALL) ALL, but that failed too.
View 3 Replies View Relatedis it possible to do so? I mean, I want every user to be able to run '/bin/x' for example, as root without entering a password. I know the security risks, but I'm trying this in a risk-free environment which security does not matter very much.
View 2 Replies View RelatedI logged in as root and was trying to add a user to sudoers, but then when I tried to save it said that the file was write protected and couldn't be saved. However, when I returned to look at the contents of the sudoers file, they were all done. The file is now empty.
1- How can I restore the contents of the default sudoers file. (I have FC12)
2- How can I add a user (no password) to the sudoers list without this happening again?
1.sudo command runs command as root,is that our name should be mentioned in the sudoers file of root?i got the error like this-"sandyain is not in the sudoers file.This incident will be reported."so what is that mean?
View 4 Replies View RelatedIn my sudoers file, there are lines that begin with #, lines that begin with % and lines that begin with neither. The # is definitely being used to comment out lines, but what does the % do? Is it a comment marker too?
View 2 Replies View RelatedRecently I edited sudoers file and did typing error. Now neither I can do sudo nor change it.
Code:
sudo visudo -c
>>> sudoers file: syntax error, line 8 <<<
How I can get correct the sudoers file?
Relatively new to Linux, but I'm trying to grasp the proper way to modify the sudoers file. As an example, what would I have to modify in /etc/sudoers to allow a user (say 'user1' for the example) to be able to add/remove software through yum? I'm aware of the fact that I need to use visudo and how to use the vi editor. I've Googled this topic and while I've found a number of pages on the topic, I never see many examples.
View 5 Replies View RelatedI have installed debian 6 recently, and during installation I selected not to allow root login (and thereby enable my standard user to use sudo).If I check sudoers (by using visudo) my standard user is not listed anywhere, but he can still use the sudo command without any problems.Where else could this permission be stored?
View 5 Replies View RelatedI recently installed Fedora 13 "Goddard" using the graphical installer (although I prefer the 'text/ reduced graphics' option.When I start the system (after installation completes), it runs in graphical mode and presents me with a graphical login prompt. However, due to security reasons (I'm told), it won't let me log on as the root/ admin user (which is fair enough).If I log on as another user (eg : alpha, charlie or delta, for this example), I can't edit the sudoes file to add one of these users (alpha) to the file. This is because these users aren't in the file, as far as I know.
At no stage during installation was I offered an option of either setting the runlevel or adding a non-root user to the sudoers file.I have found a way to change the runlevel setting, so that is not really an issue.What I would like is either of the following :
1. A modification to Fedora's graphical installer that allows for an explicit option to set the runlevel (graphical/ command-line) and another option to add the first created non-admin user (alpha in this example) to the sudoers file.
2. Information on how to add a user to the sudoers file without adding all others (eg : alpha, but not charlie and delta, in this example).
I have read the relevant man and info pages for the su, sudo, sudoers and visudo commands, but I only got confused. (I don't know BNF/ EBNF and I would like a solution that doesn't involve having to learn these BNF dialects, although I will if I have to.)Also, I have seen solutions that show how to add all users, but not individual users, to the sudoers file. What I want is to add an individual user (if this isn't clear already).Please feel free to send me an e-mail about this post : nigel.nq.ngw[at]gmail[dot]com with the subject line "Linux Forums - Fedora 13 Add User to Sudoers"
Recently I migrated from Ubuntu to Debian, first thing i wanted to do was to give myself sudo permissions and lock the roir account. By default sudo group don't have permissions to do this on debian, so i wanted to edit sudoers file by typing visudo. But i keep getting this
error: Error opening terminal: vanilla How can i solve this.
since a recent upgrade to Mandriva 2010.1 I am not able to 'sudo' as administrator or when I use the 'root' password. I am the only user on this machine (Dell Inspiron 530S multi-booted with Window's Vista Home Premium, Ubuntu 10.4, and Mandriva 2010.1). I can get into the 'Manage Users' section of the control center by authenticating as 'root' but I can't access 'sudoers file' from command line.
View 4 Replies View RelatedI have a fairly complicated request The short version is, I want to set up a system so that any user can change the ownership of a certain set of files at any time without root access. I think it's possible to set up sudoers to do that, but so far I have failed miserably.I have tried setting up a wrapper script around chown, then putting that script into sudoers, but it didn't work. Here's the script and sudoers (paths changed to genericize them):
Code:
#!/bin/bash
#this script moves a copy of the code
[code]....
How do i add the default normal user to the sudoers group? Is it normal for the main user to be kept out of the sudoers group or did i do something wrong during install?
View 2 Replies View RelatedI managed without knowing to remove my user from the sudo users group. I did usermod -G fuse <username> and now I can't sudo anymore. How do I get back to the promised land?
View 3 Replies View RelatedI have tried several things to attempt to fix my sudoers file however it is still coming up with errors. The error says
[code]...
the sudoers configuration file is set to the default as I have ran a dpkg on it, have also uninstalled and reinstalled it, and went over the configuration file ensuring it looked like the defaults I had seen online.
When i installed the new version of debian on my laptop to try it out, i noticed that i can't sudo as my main account is not in the sudoers list and i cannot put me in because i'm not sudo.
Code:
cesar@debian:~$ groups
cesar cdrom floppy audio dip video plugdev netdev powerdev scanner bluetooth
I have to enter as a root account but don't know how, plus i forgot my root password.
note. i dualboot with ubuntu 10.04 and grub is managed by it.
I need to add a user to the sudoers in my vps host and edit a couple of files and I just cannot make sense of visudo, vi or nano. The tutorials I find on the net just take too long to study and they are never complete, can someone explain what I need to do? I am running Debian 506.
View 8 Replies View RelatedIs it possible to disable all passwords in debian. I do not need any security usernames and passwords. I don't want type sudo all the times and i want free acces all the time. With debian i allways have some premission problems and why i need a password for my home computer?
1. For example today when i tried to install a file debian told me that my username is not in sudoers file. How can i fix this? 2. Is it possible to disable all passwords and asking admin premission, i dont need that kind of ??? for my home computer. (including the login screen user/password asking) And i am sorry for my grammar errors, i hope you can still understand what i have tried to say.
The normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies View RelatedI changed my user name, and now the Terminal shows my new user name.I log in with the same user name and the same password. But after changing the username, I can't get anything done as sudo. It says that I am not in the sudoers file, and I can't get in at all. I tried sudo visudo, sudo -i, sudo -l..When, I wrote sudo -l the following came in the Terminal.How do I get into sudoers file and give my new user name ariya the root privileges. Even my old user name doesn't work at all.
View 9 Replies View Relatedeverytime i try to do anything with sudo i cant and this time it was extremelly costly. From now on i don't want to risk anything like this again and i need to be able to sudo.
View 2 Replies View Related