Fedora X86/64bit :: Read From Internet That Using Gparted Through Live Cd?
Mar 11, 2010
Os version: fedora 12 (x86)I wanted to resize my root partition so i read from internet that using gparted through live cd could do it, so i did the same. However after rebooting, i once again came across the screen i hate the most:(the black screen with grub prompt):
grub> i don't know if there is still a way to recover my previous installation. also tell which is the best and most reliable way to resize ext4 root partition so that i do not make the same mistake in future.
I have the following problem on fedora 12, x64 amd; I have installed fedora 12 from a live cd, whit custum partition tables (no lvm or somting like that). my sceam is (on a single 80 gb maxtor sata disk only 1 system, clean install):
/ /home swap
Notitng more (not needed also). The installation was successfully. No problems on the install part. ALs no problems on the ugprade part. I installed the rest using yum groupinstall. When i want to add the extra 4 disks (all samsung 1 tb spinpoint sata) that i have for my backupdata, non of the partiotionprograms can recognise. If i do; moun /dev/sdb1/ /media/sdb1, it says that i need to add the file system. well, by some sort of misstake, i could find a workaround for this. When start gparted, select on of the samsung disks, select any of the flags in gpart, remove the flag and give it a ok, gpart can read the amount of data thats used. After that i ame able to mount whit a simple mount /dev/sbd1 /media/sdb1 command. When i use this command: hdparm -z /dev/sdb1, i can mount the disk afterwards, whitout problems. Of course, i need to add them als to my /etc/fstab file, so they automount each time at boot.........
I've a problem booting on my fc14 64 bit. I install it yesterday and everything was ok. Then I updated it and I installed wireless drivers kmod-wl equivalent to my kernel version that is 2.6.35.6-45. I've a pavilion dv6 with a broadcom ach. for networking. So the next step was installing kmod-nvidia for my nvidia geforce but after rebooting my never allow me to log in! I can se the tipical blue-white progress bar loading nvidia drivers but not else!
my screen freeze itself after the progress bar became white. I would resolve by rescue mode but I've installed fc14 64 b using a usb-pen drive and I find no way to do this from live version.
I have a laptop and a Broadcom 4322AG Wireless adapter in it. I am using Fedora 11 64 bit Live. instructions to install and configure my internet connection in Linux. I dont know how to install drivers in linux though I have Got a 64 bit driver from Broadcom Website. In windows, my internet connection doesnt need any password to access. It get connected to internet when I turn on wireless.
I do not know what I have done but I used to be able to see the partitions on Hard Disk wich has WinXP and Ubuntu 10.04 as well as other partitions I have created.
I can access the partitions but cannot any longer see them with Gparted. Enlosed 2 screenshot ( Gparted and Disk Utility which shows the partition)
Fedora 12 installed about a week ago. Using Yum extender to add (K desktop) and remove (unused languages) when at the end it crashed. Now the Internet stopped working. Firefox, Konqueror, and Yum terminal updates have stopped working.
I'm trying to add more memory to Ubuntu from my windows partition, but Gparted doesn't seem to recognize the windows partiton. I've done it before using the gparted live cd, so i don't know why it wont recognize the partition. Is there some way to mount it so I can move space around?
Basically, I would like to have a separate /home partition on my hard disk that will be shared by two different Ubuntu releases. In other words, I would like Maverick and Lucid to be on their own separate partitions, but to share the same /home. I already have Lucid installed (no separate /home). I know how to use GParted with the Live CD in order to edit partitions, but the main question I have is how do I migrate my /home folder to its own partition without ruining data? I've skimmed through some GParted tutorials but they don't exactly detail what I want.
Once that is done, I need to know if it is possible for Lucid and Maverick to share the same /home partition, and how would I set that up?
I've been trying to use GParted Live CD to shrink my Windows XP partition and allocate this space to /home.
On GParted I shrank my /dev/sda1 (Windows) from 36GB to 26 GB. Then I had 10 GB of unallocated space. I didn't know how I could use this unallocated space to increase the size of /dev/sda7 (/home). How do you do this?
I decided I'm going to go back to a dual boot to see if I can get some of the slackware issues resolved on my laptop; its ubuntu only at the moment due to wireless problems. I've only got one hard drive so I can't simply unmount and repartition from gparted, I've lost all of my random linux live cds, and can't find a spare blank optical disc. Is there a way to boot from directly from the iso or from a flash drive or something?
I recently got new hard drives for more space and copied all my old drives onto this one (everything mirrored, no problems)The thing is, when I first setup my Ubuntu, I only allotted like 20GB because of space.Now that I have new hard drives, I wanted to give it more space, roughly double it to 50gb.The problem is, I am unable to resize it.I have booted into the Ubuntu Live CD, and started Gparted. I see all my stuff there, including the unallocated space next to my ubuntu partition (I left it so i could fill it when I expanded the partition)
The problem is, I am unable to make it larger. I right click, click on resize/move, but when I do, it just shows that I'm at my maximum size for that partition, I can only shrink it.so my question is, how in the world can I extend that partition into the unallocated space?I've tried formatting the unallocated space to ext3 to try and merge it, no success.I tried moving my ubuntu partition all the way to the right (end of the disk) so maybe I could extend it to the left, nothing
Web Browsers and email clients unable to access the Internet. Able to get software and updates with no problem.
The IVP6 setting is ignored in the Network Configuration. I have triggered it both ways. As for the firewall configuration, well it freezes at the splash screen when invoked.
Fedora 12 is the first spin, since Fedora 9, that I was able to get any updates. Versions 10 and 11 could not access the internet with anything, no matter what was attempted.
BTW, I am using Mandriva 2010 to get through here.
Does any one have a way to speed up the internet on Fedora 12? I have a dual boot system with Vista x64 on the flip-side, and my wireless connection there is just fine. But when I get on this side, it goes back to the dial-up days (yes I said the DU word). yum updates seem to be just fine, and e-mail seems to be fine. just firefox is slow. And now that I put the x64 Flash in (thanks to leigh123linux), with that working too it seems even a little slower again.
Want to repartition/resize existing 1/2 full 60MB sda2 currently containing NTFS. The "Allocate drive space" does not seem to have a resize option (the 10.04 docs claim there was a resize option here). When I run 10.10 gparted in live mode gparted crashes for unknown reason before it even finishes scanning the disk. Am I missing something here? (Never tried to resize an ntfs part. with Ubuntu.) The laptop I am installing this on currently has XP that crashes a lot for unknown reasons.
I have my partitions as follows:- Windows 7- UbuntuIf I shrink the Windows partition will I be able to enlarge the Ubuntu root partition with gparted live cd?I know I can add space after Ubuntu but can it be done before it?
I can not boot ubuntu 10.10 rc from the live cd on my AMD 64bit Gateway. After the initial splash page - the title Ubuntu with the underlining blinking dots - the screen goes bonkers - criss crossy-like.I've installed Ubuntu 10.04 previously with no problem. I've tried both the RC version and the daily build version. Is it a problem with the install CD or a hardware issue - i.e., integrated video card? (...Although you would think that if it was the video card, the splash page wouldn't appear.)
I have 3 Ubuntu installations & a PCLINUXOS, plus Windows XP installed on one hard disk. I still can boot to each one of them and can mount each one using Ubuntu.
The problem "may" have occurred when I reduced the size of some linux partitions using gparted. I still have plenty of space in each of those partitions.
When I started gparted all of the HD was unallocated. I did that from each ubuntu installation and the PCLINUX installation, plus LIVECDs. All indicated the space was unallocated.
When I did an fdisk -l from a Puppy Linux LiveCD I got a normal start and ends of each partition.
When I tried it from Ubuntu installation or live cd, I received the following types of responses:
Code: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda5
Disk /dev/sda5: 28.5 GB, 28566397440 bytes 255 heads, 63 sectors/track, 3473 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System ubuntu@ubuntu:~$ sudo fdisk -u /dev/sda5
The number of cylinders for this disk is set to 3473.There is nothing wrong with that, but this is larger than 1024,and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Plus the Windows partition seems to go over its limits.
Since all of my OS installations are still working, I don't know how critical this is. From reading another post, I understand this might be able to be fixed by making some changes in fstab.
When i boot from live USB, i can't write anything to it, because the 'Filesystem is read-only'. How can the boot USB be mounted as read-write? Maybe some boot options are needed?
I want to install 11.04 next to my working 10.04 system. First I need to make room for the new system so I have booted from a live cd and started GParted. In GParted the partition with the 10.04 system on it, /dev/sda1, has a red circle with an exclamation mark in it and I cannot resize it. When I doubleclick on /dev/sda1 there is the following warning
Quote:
Failed to change to directory '.'(Stale NFS file handle) Failed to change to directory '.'(Stale NFS file handle) Unable to read the contents of this file system! Because of this some operations may be unavailable.
The following list of software packages is required for ext4 file system support: e2fsprogs v1.41+.
The 10.04 system is working and has worked like a dream for a couple of years and the machine has never had any other system on it. Why would the live CD not be able to read ext4 fs?
I have already a ubuntu live-cd running with persistency on a USB stick but I would also want to be able to launch it, loading all the saved preferences in the casper-rw partition, but without any modifications on those settings.The idea is to have on the start menu 2 options:1- start ubuntu saving changes (on the persistent partition)2- start ubuntu not saving changes (not persistent, but loading the previously changed settings)This way, I could save preferences incrementaly, but only when I opted for the option 1.
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
I have made a persistent live usb of suse 11.2 using a '.iso' file. Now when I boot from the Live usb, the file system appears read only. I want do some modifications in the files.
