I have made a persistent live usb of suse 11.2 using a '.iso' file. Now when I boot from the Live usb, the file system appears read only. I want do some modifications in the files.
View 2 RepliesI have already a ubuntu live-cd running with persistency on a USB stick but I would also want to be able to launch it, loading all the saved preferences in the casper-rw partition, but without any modifications on those settings.The idea is to have on the start menu 2 options:1- start ubuntu saving changes (on the persistent partition)2- start ubuntu not saving changes (not persistent, but loading the previously changed settings)This way, I could save preferences incrementaly, but only when I opted for the option 1.
View 3 Replies View RelatedYesterday I did follow exactly the description how to build a live system on a USB Stick with the additional second partition for the data of Live_USB_stick. So far I had success, as my Netbook did start booting and loaded the OpenSUSE 11.2. Then I rebooted the Netbook and it never again comes up with the 11.2. It looks as if it would stop somewhere at starting the graphical system, but I'm not sure.
Today, second try, I created the USB stick with the 11.2 Live System only (no second partition). My Netbook starts booting and shows the 11.2 system successfully, also further boots are the same successful. Then having created the Live system with the second partition again, results in a un-bootable Netbook again (not even the first time it comes up).
What I wonder when I did check the USB partitions: the one (sdg1) with the Live-CD can be mounted and the content is readable. The second one (sdg2) cannot be mounted; shouldn't it be mountable and shouldn't it be formated with a file system? Did anyone have some experience on this? Or, at least, the people having a running persistent live system, what does the partition them show up?
I'm trying to create a persistent live Jessie system on my 8GB USB drive.
If that matters, I'm currently on an Arch Linux system, and I partly followed what's on the relative wiki (Pages Create a new MBR for a USB stick, Manually create a USB flash installation and Install Syslinux), plus a CrunchBang post explaining how to make a persistent live USB out of any Jessie-deriving distro (like their BunsenLabs Hydrogen).
The problem is, even if Debian boots up more than fine, the system isn't persistent at all.
Here's what I did (I know some passages are redundant, but still...):
Downloaded the Cinnamon flavor of Jessie via torrentErased the old MBR
Code: Select all# dd if=/dev/zero of=/dev/sdb bs=512 count=1 && syncCreated a 1.1G W95 FAT32 (LBA) active partition and used the remaining space on a Linux partitionFormatted the first to FAT32 and labelled it "Debian64". Formatted the second to ext4 and labelled it "persistence"
Code: Select all# mkfs.vfat -n Debian64 /dev/sdb1
# mkfs.ext4 /dev/sdb2 -L persistence
Mounted the first partition and the iso
[Code] ....
I just set-up my fedora-14 live usb on an 8gb usb hard drive but I see the space left on '/' is less than 800mb (I created a 3.5gb persistent file) like so:
Code:
livecd-iso-to-disk
--unencrypted-home --home-size-mb 3500
--overlay-size-mb 3500 Fedora-14-x84_64-Live-Desktop.iso /dev/sdc1
but I still don't have much space to install programs.
Is there a way to trick yum into installing programs under /home/liveuser/programs instead ?:
Code:
[liveuser@localhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/live-rw 3.0G 2.8G 223M 93% /
tmpfs 1002M 352K 1002M 1% /dev/shm
/dev/sdb1 7.4G 2.0G 5.1G 28% /mnt/live
/dev/loop5 3.2G 130M 2.9G 5% /home
varcacheyum 1002M 0 1002M 0% /var/cache/yum
/tmp 1002M 92K 1002M 1% /tmp
vartmp 1002M 0 1002M 0% /var/tmp
We are running SUSE 10 SP1 and MySql 5.0.62 with heartbeat configured cluster attached to a SAN and after upgrading powerpaths on the fiber switches we had to reboot the machines and remount the SAN luns.
The cluster successfully started and was working fine for about a day or so and then i logged in as root and hosts, fstab, known_hosts were all giving me this error when i tried to modify them "W10: Warning: Changing a readonly file"
I failed over to another node and same thing happens on another node. I can't modify any of these files
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
Have just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedI'm attempting to create a persistent live USB. My flash drive is 32 GB, so I plan on creating a 8 or 16 GB ext casper-rw partition for my persistence (as described here.) I would like to have the remainder of the space available as an NTFS partition. However, most of what I'm reading indicates that only FAT32 is possible for a bootable Ubuntu USB.
I've been told that if I simply installed to USB drive as if it were a regular old HDD, it would be bootable and I could simply format the rest as NTFS. I'm wondering if this is true and why all these utilities I've found (Linux Live USB Creator, Universal USB Installer, etc...) insist on FAT32. Persistent (>4GB) bootable usb, with the rest of it a windows-recognizable NTFS partition?
I am running a live (4gb) USB of Fedora_14 with 768mb persistent storage. I am trying to add firmware for broadcom wireless link, as it is not natively supported. When I download tar, extract and copy missing firmware then reboot... all changes are reverted back. How do I make these changes persistent upon reboot.
View 8 Replies View RelatedI'd like to make a "live" USB, probably Ubuntu or a derivative such as Mint. How do I make it persistent? FWIW, this particular project will be primarily used for Ubuntu Studio. My hardware works fine with all versions of Ubu and Deb so there are no driver issues, simply the question of adding persistence to the stick
View 2 Replies View RelatedI plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
I need to have a persistent Debian install on a thumbdrive to run a computer that is currently diskless (dead hard drive). So far I've managed to get it to boot Squeeze live beta by setting up the thumbdrive with UNetBootin, but it's not persistent. I found this, but step 6 is a mystery to me, as I can find no such command or package.
View 12 Replies View RelatedI've created a live and persistent USB boot of OpenSUSE 11.2 KDE according to the howto. It boots and works fine for about 5 minutes and then hangs. Only the mouse will move but I can't click on anything and it never comes back.
View 3 Replies View RelatedI have tried to create a persistent live usb thumb drive using Startup Disk Creator, but have not had any luck. I have tried running Startup Disk Creator from Linux Mint 9 xfce (currently installed on my machine) as well as from live sessions of ubuntu 11.04 Beta1 and xubuntu 11.04 Beta1. When using Startup Disk Creator in Linux Mint, I am able to set the slider to choose how much reserved space I want, but when I reboot, the USB stick does not load, I get an error message about an unknown name in the file. When using the live sessions of ubuntu or xubuntu, the section with the slider to choose how much of the usb stick to devote to the persistence file is greyed out. I get the same result whether I choose the xubuntu iso or the ubuntu iso as the source disc image. I have used the same USB stick and Startup Disk Creator to make persistent live installs before - is there something about 11.04 that does not allow persistence?
View 9 Replies View RelatedCurrently got a 32bit laptop and im running Ubuntu desktop 10.10 with the 32 bit version, If I upgrading my machine would i need to make a new persistent live usb for the 64 bit machine?
View 3 Replies View RelatedI have an old EeePC 701 4G netbook that I'm about to reconfigure for a friend who needs it to read PDF files, surf the net occasionally and do few other things. I'm going to install Ubuntu Netbook Remix, version 10.4.
Now, the 701 only has four gigabytes of internal storage, and I'm unwilling to spend money on it to expand its memory. When installed UNR takes up about 2.3 gigabytes, which leaves a bit more than a gig available for user data, and that's not much at all.
However, I could copy the live files off the memory stick in the main drive and use the remaining space for a casper-rw partition. Then it'd be only a matter of editing the bootloader in order to have a system that saves changes. This way I could fit the system on only 700 megabytes.
My question is: is there any drawback to running a persistent live off the main drive as the operating system? Something that would make me prefer eating up two thirds of the drive with the system, rather than just a fifth of it?
I imagine upgrades would eventually take up a lot of space, as they'd essentially copy a lot of the system in the live partition, but this is easily solvable by not performing them. I don't think the intended user would miss them, since she'll only really need three or four apps.
I just tried Centos 5.2 Live starting from a 2 GB USB flash drive. Everything seems to run fine, fast, stable - except for that the persistent feature is not working. I created the USB from Windows using the Centos 5.2 LiveCD image and the current version of Live USB Creator (3.7), and declared a 256 MB persistent space.
This persistence feature had worked before with Fedora 11 but the system resulted unstable, kernel panic.... Now Centos has been solid for hours in a row... but the file where persistence should be reflected remains untouched with the initial creation timestamp. When rebooting, every change in config, file created etc gets lost.
Can windows read files from a home file server with an ext4 file system? or do I have to partition the drive with the server (ext4) and an ntfs partition with the files on?
View 4 Replies View RelatedAll my torrents go to my home/username/Download/ folder, I could read/write yesterday but now I cant even copy the files to a flash drive.The error i get is "Cannot create regular file '/home/username/Download/file' : Read only file system.
View 14 Replies View RelatedI partitioned a 32 gB flash drive to one 8 gig and one 24 gig partition. Both fat32. I wanted to be able to access the 24 gig partition from XP.I installed a persistent 10.04 on the 8 gig partition.All ran well for about 3 weeks. Today during boot up I noticed that it had stalled at "creating live session user". I left it there for several minutes and then powered down to retry.Several attempts to boot left me at the same spot.I looked at the boot up messages and noticed this error... "unable to find persistent home media".I don't have a ton of save info on the live user account but I would like to be able to fix this type of problem.
View 3 Replies View RelatedI have a 16Gig usb drive and i've managed to get Backtrack up and running on it with persistence, but I really want to have on it is Mint, Backtrack 5, if possible Ubuntu and hirens bootcd. I don't really want to use unetbootin. how i need to set up the partitions, if it's possible to have both Backtrack 5 and Ubuntu with persistence since they both use casper-rw and what mint needs for persistence.
View 6 Replies View RelatedI am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.
View 9 Replies View RelatedI have a Coby MP3 player which functions as a USB drive. It has always worked fine, both on Ubuntu Karmic and on the Windows (booted from another disk).
Now, in Ubuntu, it appears as read-only (but it works fine when I boot into Windows on the same machine). How can I deal with this? It's not a matter of my fstab, which I have never manually edited; the USB device is always auto-detected.
I've created live squeeze usb-hdd and if I boot first time the udev system writes the MAC address of the network interfaces into /etc/udev/rules.d/70-persistent-net.rules.Because I use full persistence, the file is there on the next boot and I don't get network running automatically on other computers. My problem is, howto remove 70-persistent-net.rules every time during the startup?
View 5 Replies View RelatedI want to customise an amnesic Debian environment (like Kali Live CD) with everything (Users, background, icons, etc.) set up to work the way I need. This OS should be inside a memory stick, and, most important, it has to have an encrypted partition I can mount and unmount whenever I want to save persistent data.
View 5 Replies View RelatedI have a persistent pendrive of Ubuntu: [URL]
It has a file where it saves the configuration of my computer: casper-rw
But if I boot this USB flash drive in another computer I would like to do it in a fresh way, that is, without loading the configuration of my computer (saved in the casper-rw file). For example, in Puppy Linux this can be done easily, just putting pfix=ram in a boot option of syslinux.cfg and selecting this option when booting.
I think this is important because I think that otherwise the Ubuntu (at least in some cases) cannot open if used in a computer different to the one where casper-rw was configured. It happens to me that I cannot run Ubuntu with my pendrive when inserted in a different computer (I think the reason is what I've said).
I have Lenny installed. How to create, using live-helper customized Live USB with a persistent /home partition on this USB stick, to save changes between boots?
View 6 Replies View Relatedlive usb media does not let me to to save files and make modifications to live operating system that will persist after a reboot
I made the bootable stick with the liveusb creator at https://fedorahosted.org/liveusb-creator/ using an iso image of f10 live cd, a flash drive with 2 Gb capacity and a paersistent storage setting of 200 Mb
I changed root=XXXXXXXXXXXXXXi-do-not-remember-XXXXXXXXXXXX to
On the flash drive to make it bootable
I installed gparted on live operating system and when i rebooted gparted was not installed.