I' installed Fedora 12 from an installation DVD, repartitioned my hard drive etc.... After the installation has finished, there were 505 updates to install.
Here my problems started. Everytime I selected "all updates" I've got an error.
So i decided to install first all the updates with "rpm" - "yum" and "packages"
After this I could select all the other updates and install them.
During the installation my pc freezed. Rebooted and after the login there were always sessions "starting file manager" that was trying to start, one after the other... I proceeded my updates, and those processes stopped.
Ok, finally, all updates were installed and as good as I'm I rebooted my pc.......
My pc boots normaly, but the moment my logon-window should apear, I've a black screen... nothing else....
I can reboot with kernel 2.6.31.5-127.fc12.i686.PAE but how can I fix the error with my kernel 2.6.32.11-99.fc12.i686.PAE???
someone who knows the solution???
I found one who told me to install following packages:
I hadn't used my laptop in a month or so and it had a couple hundred updates to install. Everything went fine and upon reboot I am met with a bizarre login screen. It shows my like every process and program in a list, my username is in the list as is root. I can login as either, but when I do it only boots to terminal.
and this morning's updates broke x. I get a blank screen instead of the login. I'm running an Nvidia 7900GS. I tried re-installing the Nvidia drivers... no good. I switched to the nv drivers and got further; I got the login screen, but when I try to log in it gives me the KDE splash screen and then takes me back to the login screen. I'm not sure what to try next.
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
After applying some updates to F11, I was unable to login. After putting the username and password in, the dialog would go away and it would appear that the window manager was trying to load. Somewhere in the process the mouse and keyboard stops responding. The HD activity lights flashes for quite a while but later goes out.
Hoping that F12 would help, I upgraded. The upgrade went well but the problem still exists.
As a newcomer to Linux I recently installed F12 (2.6.31.5-127) from a full installation DVD and all worked well until I decided to download a bunch of updates. When I next booted up I had a second kernel (2.6.32.9-70) and the usual other option for my XP dual boot (which still works!).Selecting either kernel leads to the Fedora logo on a blue screen and then a black screen with a small underscore cursor in the top left and no other text. This is not a command line or a text editor but it simply displays key depressions - the alpha/numeric section of the keyboard in upper and lower case as normal and then the function keys and numeric key pad as control codes commencing with As both kernels yield the same behaviour, am I right in assuming that it is one of the program updates that is causing the problem? The only way I have found to get out of this screen is ctrl.alt.del which gives a short list of programs being stopped and then the machine reboots. I don't know how to pause this screen to get the details before they disappear.I have been through loads of stuff on this forum but nothing seems to fit. From the command line terminal off the boot options screen I tried su -c yum clean all and also yum clean all but all I get from Grub is error 27 unrecognised command.
As you can tell I'm a complete beginner, but I am willing to learn. The thing is I don't know where to go from here. All I want for now is to get back to the Gnome environment I can handle, then I can explore the command line at my pace instead of being thrown in at the deep end!
I'm running Fedora 13 64 bit. Everything has worked fine, until today. The latest updates killed the video.
As the bar at the bottom of the screen starts to go across and say Fedora 13 the whole bar starts to flash then goes solid white. No errors or nothing, just a black screen. What causes this?
Nvidia drivers are installed. Maybe it's them. I've had trouble with video after updates with the last 4 versions of Fedora.
I did some updates yesterday and now I cannot lock my screen via the keyboard shortcut (Ctrl+Alt+L) or the panel.Using fedora 12 and gnome.Here is the Yum log for the updates...
May 23 10:35:29 Updated: transmission-common-1.93-1.fc12.i686 May 23 10:35:34 Updated: initscripts-9.02.2-1.i686 May 23 10:35:34 Updated: transmission-cli-1.93-1.fc12.i686
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
After applying the latest round of updates last night, I turned on my laptop this AM (ATI X1300 Mobility graphics running the default drivers), selected the latest kernel in GRUB, and waited to log in....only problem is that instead of seeing a normal loading screen (Blue with Fedora icon filling in), I instead get a black screen mostly covered in multicolored rectangles. I don't believe there was a graphics driver update, so I'm rather confused as to what went wrong/how to procede. I can still boot using a previous kernel.
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..
I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.
I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.
I've since rsync'd my system back to where it was before the update.
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed ---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed ---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated ---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
I have been installing these updates on Fedora 12 and so far, my computer now has 3 more fedora sub-versions "not sure if that IS their name". So when I first boot the pc, the 3 versions appear. Normally, that wouldn't seem like a problem "although I don't know why don't the new ones simply delete the old ones"..However, the new ones don't work. Only the oldest form which I installed through a CD is the one that works. The others just cause the computer screen to flash a couple of times and freezes.
I would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100% devtmpfs Use% is 1% tmpfs Use% is 1% /dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
I am having trouble with the login screen. After I enter my password and click login, I hear the opening chime in fedora, then my keboard lights flash on and off and my screen goes blank for a minute, almost like the machine is rebooting, then goes right back to the login screen. Sometimes I have to do this 5-8 times before I finally get into the desktop, other times it works the first time.
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
I want to change the login screen in Fedora 10. I know in previous versions gdm manager or something like that was used to change this. I have a theme file that I downloaded from Gnome-look, but I can't use it in Fedora 10 because gdm wasn't included in 10 or something?How can I sort this, and does anyone know if gdm is making a return in Fedora 11?
I'm running Fedora 10, it seems to boot normally, but the login screen never appears. all it shows is the cursor with the blue circles running around it, meaning its working on something. I let it sit for about 10 minutes and still no login screen.
I installed the following packages in order to install kscope in my Fedora 11.1. kdelibs-devel2. kdebaseAfter I restarted the system, the options of GNOME and KDE sessions come to the login screen. Also, when I enter the login credentials, the username and password are accepted, the login chime sounds, and i m thrown back to the login screen
Recently i am having an issues with my fedora11. Whenever i got the login screen when i start up my OS, i entered the password and press enter, it will bring me back to the same screen as i never entered any password.It is always repeating the same tasks (inserting my password and enter) for about 6 times then only success to login to my computer
I looked at Google and only thing that I can find is change to KDM, just change the back ground or GDM is just in a rewrite just wait. How to change the GDM themes with standard themes at gnome-look.
New clean install of Fedora 12 (my worst Linux experience so far, should have sticked with Fedora 9, it was old but it was stable, unlike this half-backed... whatever it is). Anyway, to the matter at hand (one of the many):How do I switch to the console from the graphical login screen? CTRL+ALT+Fn doesn't work, CTRL+ALT+Backspace doesn't kill X, it's a NIS machine with only root as local account
Can we log into the gui login screen with root under Fedora 12 because I keep getting an Authentication Failure even when I change the password to a simple password named password? I can login under root in the terminal and when ever it requests the root password in a regular user account.
