Fedora :: Gtk Apps Via Remote Xserver Crashes?
Oct 20, 2009
as non root user gdb system-config-network
(gdb) run
Starting program: /usr/bin/system-config-network
Executing new program: /usr/bin/consolehelper-gtk
Detaching after fork from child process 8630.
[Thread debugging using libthread_db enabled]
Program received signal SIGSEGV, Segmentation fault. 0x00000033b5e5fac9 in ?? () from /usr/lib64/libgdk-x11-2.0.so.0 Missing separate debuginfos, use: debuginfo-install usermode-gtk-1.100-2.x86_64
[Code]...
View 2 Replies
ADVERTISEMENT
Jan 14, 2011
So, after the last Update, my PC crashes when trying to load Xserver. I can boot in the "recovery mode" from grub and then choose "resume" from the menu. This takes me to tty1. From there if I try to startx my computer crashes again and I'm left with a black screen with no hints as to what went wrong. I even tried
Code:
But the file stays empty because apparently my computer hangs before it has the chance to write anything to it.
Finally, I went to the /etc/X11 directory and searched for any xorg.conf backup files. I only found a xorg.conf.fglrx-0 which I renamed to xorg.conf and tried to load xserver again with the exact same result.
Ctrl+Alt+Backspace doesn't work either.
View 2 Replies
View Related
Mar 5, 2010
Desktop computer (AMD64) running F12. Nothing unusual about it, stock install. Thinkpad laptop running Windows XP. Putty is installed, I can SSH to Fedora.
If I'm at the laptop, in a Putty session, how can I (for example) type "firefox" and have the resultant Firefox window appear on-the-laptop?
I generally have X running all the time on the desktop because I can't get the wireless network connection to function without NetworkManger (not that I really care because I'm rarely at a console screen and need net access).
View 2 Replies
View Related
Dec 14, 2010
I'm running ubuntu 10.10 I have a Samsung Syncmaster 205BW Monitor and I needed a graphic accelerator to run my science software and to view full screen videos. so I installed the NVIDIA 96.43.19 Driver as recomanded by unbuntu. Well the server installs OK but doesn't completely communicate with my monitor, I'm using GeForce4 MX 440 with AGP8X/AGP/SSE2 Graphic card. I'm unable to set the correct Resolution which is 1680X1050, the driver only list 1280X1024 and doesn't list the correct one.Also the driver Crashes when I try to set the CPU scaling, it's locked on stretch mode. Also when ubuntu loads X it doesn't accept the Xserver settings I have entered in the driver Set Up.The additional driver screen also says the Driver is active but not in use. I sent a bug report to NVIDIA but they never answered me back.
View 2 Replies
View Related
Nov 24, 2009
My X crashes when I...
1) ssh to a remote centos server using X11 forwarding
2) open the virt-manager remote application (the virtualization management app)
3) Open the remote console
Just to be clear, my local X11 crashes. I get back to the log in screen.
I get in my Xorg log:
Backtrace:
Fatal server error:
-Is this enough for a bug report?
-How I can make X dump a core file for better debugging?
-Do -debug RPM packages still exist, and if so, should I install one for the X server and will this help with debugging, and if so, how do I install it.
View 5 Replies
View Related
Nov 30, 2010
Though this was just a problem I was having with "amarok," however, It has come to my attention on "Ktorrent" as well.What is the connection? They are both based on the KDE desktop environment.Any "KDE" based program (GTK+?) will crash my GUI (im not sure if its called xserver or xorg or whatever). How do I go about diagnosing this problem? All the other programs run without crashing the computer, however, when I run "amarok" and "ktorrent" (both KDE bassed) my GUI crashes and restarts back to the login screen.
View 1 Replies
View Related
Feb 17, 2011
My desktop decided one day to simply die and not start, whenever I log-in, KDE starts loading then promptly crashes and falls back to login screen. I was unable to find anything useful in logs, but I installed Xfce which runs ok. However when I start any KDE app under it, it crashes with a message:
Code:
<unknown program name>(23097)/: Communication problem with "dolphin", it probably crashed.
Error message was: "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name org.kde.dolphin was not provided by any .service files" ".
View 1 Replies
View Related
Feb 16, 2016
I noticed weird behavior with some of the installed applications. It all started with Guake when I wanted to use it. My shortcut key is F4, I hit F4 and nothing showed up. So I run Guake in terminal, everything fine. Then I hit F4 key and after few seconds Guake crashes with message "Segmentation fault". Nothing more, just that. Then I noticed that Audacity does the same, Gdebi too and even Reportbug app does that (I'm not sure about "segmentation fault", but the app crashes). I don't remember doing anything special or installing any app. All I can think of is this message when booting the system
Code: Select allsystemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
No idea, if there is any connection. Is there anyway, how I can maybe see more behind that "Segmentation fault" error? I found history.log in /var/log/apt/, so I'm thinking about looking into it and see if I really did not installed anything. I have a little feeling that it might have started after some update, but I'm not sure about that..
View 7 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
Aug 2, 2010
Is there a list of apps in ubuntu that can be controlled by a remote control?
View 1 Replies
View Related
Feb 15, 2011
I am running XBMC-standalone on a minimal Ubuntu installation and everything works as it should almost out of the box ... Now I would like to use my remote to navigate through ultrastardx which I start as an app(within XBMC).
I use linux-input-layer(devinput) with lirc(=necessary to make all buttons work).
So, if I start ultrastardx with the configuration from above my RC does not work at all but when I kill lircd before I start ultrastardx I ll get basic functions like Left, Right, Enter,... This is great but I miss two main functions Jumpto and search. To get them work and tremendously increasing the WAF I would need to send a key-sequence to ultrastardx.
What do I have to do to send such a sequence like "alt+j"?
Is there a way to kill lircd automatically before I start ultrastardy(at the moment I have to this manually )?
View 2 Replies
View Related
Mar 5, 2010
This is my first post here. I hope someone can help because I'm quite frustrated by now. I'm trying to write a bash script which will start a graphical app on our Ubuntu compute servers via X. I'm using a loop like:
for machine in 1 2 3 4 5 6
do
ssh -X computer-$machine "xeyes" &
[code]....
View 3 Replies
View Related
Apr 23, 2010
My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)
My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.
View 1 Replies
View Related
Dec 27, 2009
I use 3 computers attached to a kvm switch (not the hypervisor) and this works fine w/ windows xp and ubuntu 9.04 and earlier. However I am having a problem w/ Fedora 12. It seems that it cannot read the EDID block, so I am not able to set the display above 800x600. There is no xorg.conf file, so I had one generated by Xorg -configure :1. I also tried using the modeline instructions, but the Xserver would not start until I removed modeline. I have tried adding to Section "Screen"
Subsection "Display"
Modes "1280x800"
EndSubSection
but it seems that this is ignored. how can I get the Xserver to set display modes above 800x600 when it cannot read EDID (thru a kvm switch) and it seems to be ignoring settings in xorg.conf?
View 6 Replies
View Related
Apr 2, 2010
I am running fedora 12, x64. How can I upgrade fed12 as such? (apart from compiling the kernel myself)
View 3 Replies
View Related
Jun 30, 2010
I tried my best on searching for the answer to this question. I couldn't find the right command to start another XServer. Maybe I just don't know how to look for it, or I'm using the wrong keywords. Anyway, what I want to happen is hit CTRL+ALT+F6 (F7 to return to my desktop) and start another XServer to run a full screen game. How do i do that? Is it possible to have multiple instances of X?
By the way, the error says that an instance of x server is already running on display 0 after I have issued this command: Code: startx In case you're wondering why this is my solution, it's because scripting is not my type for automatically making an xserver when I click a game, especially if you'd have to do it for all other games :/ So, let's stick to my idea D unless it's impossible, of course. EDIT: I was able to get a new xserver with xterm in it, but it seems there is no acceleration or some sort >.< OpenLieroX runs at a frame rate of 15 fps or so. Anyone have an idea on how to enable acceleration on openbox?
View 1 Replies
View Related
Mar 19, 2010
I have followed serveral sets of instructions for creating an installation media USB key from the DVD.iso for fedora 11 i386... Every time i have worked through the installation i get a very bare bones system...
why would this happen... i look through the usb key and can see packages for xorg and gnome etc... but they are not installed? do i need to specify somehow that i want a "full" install... so far i have selected something like "Install or upgrade system..." why are some "components" missing from my installation?
View 5 Replies
View Related
Feb 17, 2011
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies
View Related
Sep 15, 2010
We're using both SuSe and RHEL servers. Our servers are running behind firewall device and remote root login is disabled in SSH.
We're using NAT.
Remote client connections including failed logins are logged into the /var/log/messages but what is logged are gateway ip of our LAN - the LAN IP of Firewall device.
How can I logged the external or public IP of the remote client?
View 4 Replies
View Related
Sep 5, 2010
I am using debian testing on my office pc, but i need to access it's desktop from time to time. So i need No machine/teamviewer software that can provide me with possibility to interact my desktop. The problem is, that i want to run shadowed session type, because teamviewer is not good for me. So, when i run no machine in shadowed mode, it crashes with message "The connection with remote server was shut down, please check your network settings and try again." The log is here:
[Code]....
View 1 Replies
View Related
Apr 30, 2011
Some minimized apps no longer appear in the top menu and by that are no longer accessible.For example firefox with the minimize addon or Jungel Disk backup service.How can I reach apps that minimized them self and are not shown in the top menu?
View 2 Replies
View Related
Apr 23, 2010
I currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies
View Related
Mar 31, 2010
How do I run applications from the Fedora 12 cmd line? Like if I wan to run Twitux (Twitter App) from the cmd line, how would I do it?
View 5 Replies
View Related
Jan 31, 2011
I'm running Fedora 14 KDE. I've configured my HP LaserJet 2300 printer in System Settings, and can print the test page fine, but when I try to print from an application such as Firefox, the application seems to think it's printing, but it doesn't actually print. I see no dialog box telling me that a job was created. There are no new jobs in the printer applet. Where are my print jobs going? I'm not really even sure where to look. I don't see anything printer related in /var/log/messages.
Well, looks like I got it fixed. Not sure exactly why, but restarting CUPS seems to have resolved it. We'll see if it stays working,but for now, I can print...
View 2 Replies
View Related
Jun 26, 2011
I am a complete Linux beginner, and have just installed F15 with Gnome for my desktop.
How do I get applications that may be installed but are not on the desktop, onto the desktop with an icon? I want to run iPython now, and soon I will want to run an Office suite...
View 6 Replies
View Related
Aug 31, 2009
I have this weird problem. some of the apps like gnome-system-monitor, gnome-power-preferences, nm-applet(when clicked on edit connections) keep crashing.
the moment I log in into my gnome desktop, all the apps work fine for a minute. the problem starts after a while say 5 mins... I will not be able to run any of these apps. I always get the crash window.
Iam using fedora 11 on a toshiba satellite m200. this problem has been there for a long time now. initially I thought that software updates will make it ok. but even after several updates, the apps keep crashing.
is there a way to fix this?. everytime I need to access them, I need to logout and login and then acces them quickly before they start to crash. this is quite time consuming and irritating.
View 14 Replies
View Related
Aug 14, 2009
One of the apps that tries to run needs gksudo. Can I install that? I can't find it in the fedora or rpmfusion repos
View 1 Replies
View Related
Dec 2, 2009
I just installed Fedora 12 86_64, and Wine won't run any software that I attempt to install. It just says opening file, and after a few seconds disappears. The same software that I was running in Wine f10 is not running in 12.
View 14 Replies
View Related
Sep 21, 2010
I want to use GCC to compile my java programs... I dont want to use OpenJDK. using OpenJDK to compile java... I WANT GCC
When I run this command:
Code:
[AliasM2K@localhost Documents]$ gcc HelloWorld.java
I get:
Code:
no classpath specified
So... How to specify a classpath?
View 1 Replies
View Related
Nov 3, 2010
I'm upgraded F13 to F14 and now all the GTK+ apps have this "white end" style in the menu. My question is, is that the new GTK+ style or is something wrong? [URL] I'm using KDE in F14 with QtCurve style for GTK+ apps.
View 14 Replies
View Related
