I recently updated eclipse 3.5.1.-27 I am getting the following error. No editor descriptor for id org.eclipse.jdt.ui.CompilationUnitEditor I am using sun jdk. I reinstalled it and tried to start. Same problem. When I try to open projects its not showing any java related things.
View 2 RepliesI tried to get 3d hardware support in my FC12 install. I grabbed the latest appropriate drivers from the nvidia website for my Geforce 6800 XT graphics card. I changed the inittab file to boot to command line, ran the .run file as root and ran into a couple errors doing so.
I then proceeded to use yum (which i do like but this is a bad scenario for me thus far) to update my drivers to the suggested kmod-nvidia drivers that exist out there. Once all of the installation was completed I rebooted and got the following error displayed at the top of my screen after the fedora loading bubble disappeared. The system just seems to hand at this point....
"usb 2-1: device descriptor read/64, error -62"
I did a hard boot on the machine and tried again, this time i pressed the esc key to watch the interactive startup screen and noticed that after "enabling local filesysem quotas: [ OK ]" i get a
***Warning -- SELinux targeted policy relabel is required.
*** Relabeling could take a very long time, depending on file
*** system size and speed of hard drives.
This will continue with asterisks across the screen until eventually it stops and then I am stuck as to what to do from here on out. What could possibly be causing all of this mayhem?I have tried to use the fedora core 12 install cd to launch it into "rescue mode" and from the bash command line proceed with modifying my grub.conf to not use the "newly installed kernel (2.6.32.11-99.fc12.i686)" that was installed with yum during my kmod-nvidia driver installation.
I get an error while compiling in Eclipse:
*.o: file not recognized: File truncated
I tried to remove all the .obj and .moc folders and make clean but can't solve the problem! Maybe I'm missing something here.
I have an FC13 x86_64 server and having trouble building RPMs, but I don't think it's specifically an RPM problem. I think it's a tty management or other type of problem.
When spec files have a "%files -f filelist.txt", which contains the list of files for the RPM, it calls the /usr/lib/check-files script, which sorts the files that are supposed to be in the RPM and compares them with the files that are in the built RPM before they are packaged.
The trouble is that the sort fails.
Here's the trace from the check-files script:
The above doesn't show that the output from sort is redirected into those /tmp files. The first sort succeeds because it reads data sent by the "find" in the same shell. The second sort fails because (I think) it cannot read data from stdin for some reason.
What could possibly cause this? I've checked various permissions, libraries, even used strace extensively, all of which is inconclusive.
This is one of my test server boxes, so this problem is something that I've caused, but I have no idea what.
libc controls input and output, correct? Could it somehow be a glibc problem, or a devpts problem? I can run a simple command and pipe it to sort with no problem. It appears to only be related to sub-shells.
I also replaced sort with cat and just tried to redirect stdin in that file to a temporary file, and that also fails.
I've tried running it with selinux disabled and that has no effect.
I'm having issues with getting my USB ports to work on my server. USB keyboards, mice, drives, flash drives, card readers, etc. will not work on this server.
dmesg
Linux version 2.6.18-194.32.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jan 5 17:53:09 EST 2011
BIOS-provided physical RAM map:
[code]...
I am new to Fedora (I have always used ubuntu in the past), and I am trying to download eclipse. Unfortunately, "sudo yum install eclipse" is returning "no package eclipse available". I think this means that I am missing the correct repo, but I'm not sure which is the right one and don't know how to add it to my repo list for this version. My version of fedora is centos5 based, and my current repo list is the following:
[Code]...
After a motherboard failure and replacement a Dell PE 6850, during the first restart, we receive this on running RHEL 4.5: Loading PBR for descriptor 3...done. Bad PBR Sig. Also, I have determined PBR to mean "Partition Boot Record." I have not been able to determine what "descriptor 3" is.
View 3 Replies View RelatedWhile I had the case open to swap out a network card I thought I would drop in an old USB card (previously used with no problems on a machine running Debian) however on boot I'm now getting some errors showing up. The card has been sitting around for a while so it could be an issue with the card.
[Code]....
I have been using CentOS 5. for around 3 months. It was all fine and was having a pleasant experience using CentOS. Today when i turned on my computer and booted CentOS i am having the below error: Grub comes up, allows me to select CentOS 5.4 kernel image. and displays RedHat Nash version: and then the below error occurs:
[Code]....
error message when I ran my program that I couldn't open my local file. I have two files first one is called client, second one is called server I am using named pipes to sent a message from client to the other file called server in client I used mknod() to create the two named pipes,one for read,one for write and created new thread in client using fork() spawned a child process that executed the server file both named pipes are opened the client file got the message from the user and sent it through the named pipes to the server file when the server receives the message , it needs to verfify it is correct in the server file, a local file descriptor is created to read and send this verifing message when it is not correct but I am getting an OPEN() error when I tried to open this shared local array buff and attach it to a file descriptor where the message is kept why do I get this error in server file
int main()
{
/*both named pipes are open*/
rfd=open(IFIO1,0);
wfd=open(IFIO2,1);
[code]....
I have installed a copy Fedora core 10 with the Eclipse C++ CDT feature. I am getting the following error when I do a project build for the "HelloWorld.cpp" Eclipse sample program: make: *** [HelloWorld.o] error 127
I am somewhat certain it is caused by an improper or incomplete configuration of Eclipse C++ CDT. Can anyone provide detailed instructions for configuring the Eclipse C++ CDT?
I installed eclipse galileo a long time back and used pydev plug-in for development. i wanted to install the java plug-in for but could not install it. My friend gave me his eclipse folder (eclipse helios) which contained the java plug-ins, i thought copying those plug-ins to the /usr/lib/eclipse/plugins directory and assumed that it would work. though it did, but my eclipse galileo was now eclipse helios and took really very long time to startup. I completely removed the eclipse and other dependencies using synaptic. (also deleted all the plug-in files from the /usr/lib/elcipse/plugin directory). I reinstalled eclipse and now on starting eclipse i get the following error. the error msg tells me to view the error log file in the /usr/lib/eclipse/configuration/xxxxxx.log
[Code].....
Am Running 2.6.18 Redhat Linux in my system and i am getting this error Could not open "eclipse-linuxtools-helios-SR2-incubation-linux-gtk.tar.gz.part"
View 1 Replies View RelatedI have been using Eclipse to program in Java for a long time, and have been using Jigloo for most of my GUI design. Recently I decided to try out the C/C++ plugin. I tried installing it, but it did not work. After many attempts, I finally gave up. However, after uninstalling it I found that Jigloo had stopped working. Any other plugins I try to install now also don't work. I have tried uninstalling and reinstalling plugins, and reinstalling eclipse, but nothing I have done fixes it. Although eclipse says that the software has been installed, nothing shows up in the features list or the plugins list.
Another problem: When I install eclipse from the repositories, it doesn't install a bunch of libraries and eclipse cannot recognize standard java files.
I have been writing PHP using Adobe Dreamweaver; I have been looking around for an application that focus more in PHP.I have found:
[URL]
and:
[URL]
I know Zend stands behind PHP and that Eclipse is a popular open source IDE. What is the difference tho?Is the PDT Project only a functionality that could be added to Eclipse IDE? Is Zend for Eclipse a stand alone IDE for PHP? if so, Why the Eclipse in the name? I have downloaded Zend Studio for Eclipse, so far it seems very complete (no that have learned how to use all its features).
The Metrics plug-in supports Java development well at Eclipse.
[URL]
I would like to know if it supports Eclipse CDT, so I can use it with my C++ project. Any thought? If it doesn't support CDT, is there any good static code analysis tools available for Eclipse CDT?
i am trying to add the ADT tools in my eclipse and this is the error mesage i am getting:""Cannot complete the install because one or more required items could not be found. Software being installed: Android Development Tools 10.0.1.v201103111512-110841 (com.android.ide.eclipse.adt.feature.group 10.0.1.v201103111512-110841)
View 1 Replies View RelatedI created a quick makefile with the following lines:
Code:
$(BINARY):
echo "----- Linking $(BINARY)----"
gcc -m32 -g src/* -Iinclude -I$(HOME)/include -I$(HOME)/include2 -D_LINUX -DSYSV -DPOSIX -L$(HOME)/shared/lib32 -lidlib -lid2lib -o bin/sampleapp
echo "---- done ----"
It builds fine when I build from the command line ( make -f sample.mk).
However, it does not build when building from eclipse (which essentially calling the same makefile). The make output shows exactly the same as what I got from the command line build, except the last line showing
Code:
collect2: cannot find 'ld'
make: *** [sampleapp] Error 1
I am not sure why it tries to call "ld" when building from eclipse.
I recently had to reinstall Eclipse on ubuntu 10.10 and i did it twice, once just removing eclipse package, and the second time removing every package associated with an eclipse install.when i launch eclipse I go into my package view and select a package and then double click on a Java file.
View 5 Replies View RelatedI use Slackware64 13.1. I installed eclipse from slackbuild.But how can I install Eclipse CDT? is a plug-in for eclipse? It's another program?
View 4 Replies View RelatedI wanted to use resin in eclipse helios, on my CentOs machine. So i added Resin (Java EE Web Profile) Server 4.0.19 in " Install new Software " in eclipse. It gave the following error.
Code:
Cannot complete the install because one or more required items could not be found.
Software being installed: Resin (Java EE Web Profile) Server 4.0.19 (com.caucho.resin.eclipse.feature.group 4.0.19)Missing requirement: Resin (Java EE Web Profile) Server 4.0.19
[Code]....
Public key for eclipse-swt-3.5.2-3.2.el6.i686.rpm is not installed
I'm having trouble with Eclipse. after installing the plugin Color Theme, I will change the color Window > Preferences. The following error appears: Unhandled event loop exception No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)]
View 1 Replies View RelatedOn windows I really only used Notepad++ as my text editor, it had two features that I loved.What I need to accomplish is what I would do with Notepad++ column editor.I could have like 100 lines, and place the cursor at a column, and goto edit>column editor, and I could insert an incrementing number. (I could also pad the incrementing number with 0s, this was GREAT for making batch files among other things.)So each line at that column had a number higher than the previous line.The other feature that I used sometimes was a search/replace with regex patterns.Does anyone know of an editor that has those features for linux? I am mostly after the column editor insert feature but if you know of one with both features that would rock.
View 1 Replies View RelatedI wanted to create a really cool intro on openshot, but when i clicked: new animated title, i clicked glare and it showed me this exact message:
Blender, the free open source 3D content creation suite is required for this action [url].
Please check the preferences in OpenShot and be sure the Blender executable is correct. This setting should be the path of the 'blender' executable on your computer. Also, please be sure that it is pointing to Blender version 2.5 or greater.
Blender Path:
blender
Version Detected:
2.49
How default editor can be changed in redhat linux to different editor.
View 4 Replies View RelatedHow i can get/install Eclipse IDE for php?.
View 9 Replies View Relateddownloaded Eclipse for my programming needs, how do I get/install the c/c++ plugin?
View 2 Replies View RelatedI've install the fedora eclipse package. But I cannot start eclipse. It just show the logo and the CPU goes 100%
View 2 Replies View RelatedCode:
How to install "eclipse-php-helios-linux-gtk.tar.gz" on fedora 14
Can someone please tell me how to uninstall Eclipse from fedora 12.
View 2 Replies View Related