Fedora :: Why Kernel Update Delay On F11
Mar 19, 2010
Last Saturday, I ran an update on my laptop using F12 and received a new kernel. As of this morning, the new kernel hasn't shown up on my desktop, using f 11. (Yes, I check every day.) Currently, my uptime is 34 days, so you can see how long it's been since the last kernel update for F11. Does anybody know why there'd be an update for one version and not for another? In case anybody's wondering:
[joe@khorlia ~]$ uname -r
2.6.30.10-105.2.23.fc11.i586
View 2 Replies
ADVERTISEMENT
Feb 4, 2010
I recently updated my fc12. before the update all was well but now it takes very long to boot. when i checked the text output by pressing F3 it stops at "Applying Intel CPU microcode update".
View 1 Replies
View Related
Jul 18, 2010
From F12 to F13. Is there anything I should remove before updating? I have few programs isntalled from source/binary installers in /usr for example. Would it cause problems?
And is there any chance to be able to switch from a 32 bit kernel to 64 bit kernel during the update? The hardware is capable of this.
View 4 Replies
View Related
May 11, 2011
After GRUB 2 comes up (I'm running Ubuntu 10.10) and I choose the OS to boot, there is about a 5 second delay where nothing appears to happen after I make the selection -- no disk activity. It happens consistently every time I boot. Again, this is after I choose the OS to boot, so it shouldn't have anything to do with the standard delay to allow me to choose the appropriate OS.Is there a good way to troubleshoot this and determine what is causing the delay?
View 4 Replies
View Related
Aug 5, 2010
I am receiving a transaction error when I try to update to a newer kernel, the error is:
Test Transaction Errors: installing package kernel-debug-2.6.32.16-150.fc12.i686 needs 519KB on the /boot filesystem If I run disk usage I get:
# du -h /boot
217K/boot/efi/EFI/redhat
219K/boot/efi/EFI
[code]....
System monitor shows I have 56% free in /boot. So where can I get the extra free space or force yum to recognize there is enough in that directory?
View 2 Replies
View Related
Nov 2, 2010
I'm using F13 and I would like to update my computer using yum update.
I did this a few weeks ago and yum update downloaded and installed
Quote:
kernel i686 2.6.34.7-61.fc13
After a reboot I got
Quote:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
To get around this I did a ctrl + s and booted to an earlier kernel. Once in I deleted the latest kernel using
Quote:
rpm -q kernel
to list the available kernels and
Quote:
rpm -e kernel-version
to delete the latest kernel. Once deleted my computer starts up perfectly.
How do I run yum update without reinstalling the bad kernel?
View 4 Replies
View Related
Apr 30, 2011
I do not understand this problem. I am using kernel 2.6.35.10-74.fc14.i686.PAE and while that works fine I know new kernels makes things work better. As such, every time a kernel update comes along just like all other updates, I perform a yum update. But for some unknown reason, I am successfully updating everything except the kernel.
I have attempted updates with 2.6.35.11-83.fc14.i686.PAE, 88, and 12-90 and at the very beginning of the boot I always get the same panic error and boot freeze. The message is ALWAYS as foolow. The only part of the message that changes is the kernel numbers.
[I did my best at hand writing the error message.]
I hope this makes sense to someone.
MESSAGE:
Traceback (most recent call last):
File "/init" , line 157 , in <modules>
if _name_ == ' _main_ ' : main()
[Code]....
Does any of the above make any sense?? I cannot even figure how I am supposed to fix anything since the computer completely freezes at that point! I am, of course, able to hard reboot. The I switch back to the previous kernel and everything is fine but why does everything EXCEPT the kernel update?
View 1 Replies
View Related
Aug 5, 2009
I attempted to install the new kernel 2.6.29.6-217.2.3.fc11 (x86-64) A depsolv message appears:
Quote:
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by (installed) kmod-wl-2.6.27.19-170.2.35.fc10.x86_64-5.10.79.10-1.fc10.x86_64
kernel-uname-r = 2.6.27.21-170.2.56.fc10.x86_64 is needed by (installed) kmod-wl-2.6.27.21-170.2.56.fc10.x86_64-5.10.79.10-2.fc10.x86_64
[Code].....
I upgraded from fc10; there was a residue of four fc10 2.27 kernels in /lib/modules from my fc10->fc11 upgrade; I moved them to a new subdirectory /usr/oldmodules, but the yum update command still produces the same failure message.
View 7 Replies
View Related
Dec 13, 2009
even from a terminal it wouldn't update? Maybe because I put my bootsector as ro ?
I don't know here is the message:
View 4 Replies
View Related
Mar 11, 2010
When yum updates the kernel it keeps the last 3 versions; the older kernels are deleted. Is there a way to keep more than 3 versions?
I presently have one working version and two which are not compatible with my machine. One more bad version and my system will be toast. (I would like to keep the "bad" versions for testing.)
View 2 Replies
View Related
Jun 20, 2010
I'm using F13 64bit with the proprietary nvidea driver. From yesterday's software update, a new kernel was installed:
old kernel: vmlinuz-2.6.33.5-112.fc13.x86_64
old initramfs: initramfs-2.6.33.5-112.fc13.x86_64.img
new kernel: vmlinuz-2.6.33.5-124.fc13.x86_64
new initramfs: initramfs-2.6.33.5-124.fc13.x86_64.img
I load grub from another distro partition. After the update, I changed the two lines in menu.lst, as per the above mentioned, to match the new kernel.
The problem now is that after booting F13, my monitor displays a warning saying "video mode not supported".
These two files are now at /etc/x11:
xorg.conf.livna-config-backup:
# Xorg configuration created by livna-config-display
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
EndSection
[Code].....
I'm not sure if it's exactly the same issue as mine. In case it is, it looks like that all I have to do is:
1 - boot from the previous kernel, and
2 - code: "yum install akmod-nvidia"
View 2 Replies
View Related
Nov 30, 2010
After installing the latest updates (dont know which ones) yesterday, I get a kernel panic (LED lights flashing at the keyboard and black screen) when starting X (the login manager). I am running on 64 bit with the proprietary ATI catalyst driver. How can I start in text only mode?
View 5 Replies
View Related
Jul 24, 2011
wondering if fedora 15 users will get kernel 3.0 by update,, or is that a typicall update for FC16??
View 5 Replies
View Related
May 31, 2009
Keep trying update the packages (36 in total) and every time I keep getting this error
ERROR with rpm_check_debug vs depsolve:
kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64
kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64
Please report this error at [URL]
View 2 Replies
View Related
Jul 14, 2009
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
View 3 Replies
View Related
Aug 10, 2009
The girlfriend did an update a few nights ago. Besides removing her NVidia drivers, it also installed kernel version 2.6.27.29-170.2.78.fc10.i686.
That kernel was causing problems. Now it won't boot at all. How do we remove that kernel altogether?
If we remove it, would simply doing another update from the previous (still working) kernel just try to reinstall that bad kernel?
View 12 Replies
View Related
Nov 8, 2009
I am trying to update my fedora 8 kernel, is there a way to do that? I build the one of kernel.org but when i want to boot it a get a lot of messages like:
mount: cant find /dev/root
I tried to follow the guide at building a custom kernel for fedora, but thats just for the last supported version of the kernel of fedora 8.
View 3 Replies
View Related
Nov 19, 2009
Did a fresh install of Fedora 12 on a system w/ FC8. hd0 is an IDE drive, hd1 a SATA drive.I successfully preserved the partitions containing /home and several partitiosn containing video data. (This is a myth box.) I had the installer scrub out the / partition. Installed a relatively minimal set of packages.It's up and running!
I bring up Firefox and the Myth install and configure Wiki page. One of the first things it suggests is create a new environment variable, $KVER, then reboot. I do this. When I check out $KVER it tells me I'm running:
2.6.31.5-127.FC12.i686.PAE
Installed the atrpms repository information. I tried installing the rpmfusion repository, but apparently the FC12 information wasn't up yet. So, I thought I'd go atrpms-only. Per the wiki:
yum install nvidia-graphics
(My motherboard has Geforce 7050 / 630) There were a couple of errors about missing firmware during the install. Oi! I also noticed it downloading a new kernel. "Well!" I thought, "If the new kernel is messed up, I'll boot with the other from the grub menu, and try again."
Reboot. System stops dead after the BIOS hardware display. The message "FROM CD" shows. After that, nothing. Booted to Fedora 12 DVD. Hit Rescue. Confirmed that everything is there file system with. Confirmed that grub.conf was there, and looked OK. I edited it so the timeout wasn't zero and so the menu wasn't hidden.
Rebooted. Several times. Every time, it sticks right after the hardware display.I eventually looked up "master boot record" here and found some directions for resetting grub on the MBR. That did the trick.
View 1 Replies
View Related
Dec 9, 2009
I've been away from computers/Linux for a while so I'm not up on the unix wrangling anymore. So what happened is I started yum extender and it wanted to update. Fine. I let it. I then notice a new kernel is going in so I decide to reboot. I notice different graphics behavior, then I go into my KDE and the graphics are hosed -- as they were when I tried Kubuntu 9.10, which made me come back to my old favorite Fedora. I freak, calm down, reboot (I don't get the old grub? screen offering me kernel boot choices, it just goes into its "ribbon run" at the bottom of the screen) and go into Gnome. Okay, Gnome works -- but no network, i.e., no eth0, i.e., no Internet to come whining to y'all. I then grab the live install disk, get Internet back -- but I don't know how to access the drive or make any changes!
I cry, dry my eyes, try rebooting and banging like a monkey on the keyboard during startup to see if I can get some sort of rescue mode or grub kernel choice list. Yes! After fifth reboot a random pawing of the F keys produces a grub list, I choose 2.6.31.6-145.fc12.i686 and get back to my previous functionality: KDE and Internet work. Culprit is no doubt 2.6.31.6-162.fc12.i686. I would therefore like to know how to boot to the grub manager and get a choice list of kernels to boot
View 11 Replies
View Related
Dec 27, 2009
Lately when Fedora 12 updates the kernel it defaults to the last kernel entry and not the newest one. However I set grub to boot entry 0 as the default which is allways the new kernel. It runs like this fine until the kernel updates then it seems to change from 0 to 1 on its own is this a new planned aspect of the new kernel being installed?
View 14 Replies
View Related
Jan 19, 2010
On a new install of Fedora 12, I did the online update (using PackageKit). However, though the new kernel with images are seen in /etc/boot it still boots into the old kernel:
New-2.6.31.9-174.fc12
Old-2.6.31.5-174.fc12
Code:
$ uname -a
Linux LinuxFedora.HomePC 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686
[code]...
View 7 Replies
View Related
Jan 21, 2010
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
View 7 Replies
View Related
Mar 10, 2010
What is the best way to begin troubleshooting startup problems after kernel update to 2.6.31.12-174.22.fc12.x86-64? Since updating, I am experiencing frequent system hangs at startup.
View 5 Replies
View Related
Mar 21, 2010
Just over a year ago I did a main board processor and memory upgrade on my system. I was running Fedora seven i686. If I recall correctly I booted with the install disk and chose "repair existing system" or something like that. Then I typed "rpm -e --nodeps" which removed the existing kernels. Again going from memory I typed "yum install kernel" A new kernel was installed I rebooted and the system ran great.
I have been having sound problems that i can't resolve with Fedora 12 i686. The sound card drivers are not always loaded at bootup. I have posted here several times about this problem and i may have messed things up a bit with various attempts at repairing. I am wondering if removing and reinstalling the kernel as I did at the time of the upgrade might help.
Are the commands I listed correct? It's been a long time. I found the instructions on this forum but can't find them again.
View 2 Replies
View Related
Jul 14, 2010
I did 'yum update' this morning. It stopped with the following errors:
Code:
Install 7 Package(s)
Upgrade 207 Package(s)
[code].....
View 12 Replies
View Related
Aug 4, 2010
I ran the update through yum (replicated results twice) and whenever I boot to the new kernel it either freezes on the F logo or screen goes black right after f logo. No commands work whatsoever (tried em all). I can boot to an older kernel (2.6.33.3-85.fc13.x86_64). the ones that fail are: 2.6.33.6-147.fc13.x86_64 and 2.6.33.6-147.2.4.fc13.x86_64.
The Fedora error system gave me a bug report I submitted, here's what I got:
Package: kernel
Latest Crash:Tue 03 Aug 2010 09:46:33 PM
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 00000000000005b8
Bug Reports:Kernel oops report was uploaded
View 14 Replies
View Related
Nov 3, 2010
The audio stopped working since I upgraded my kernel from 2.6.35.6-45 to 2.6.36.6-48.
Is reinstalling alsa / pulse the only option ?
View 14 Replies
View Related
Nov 15, 2010
After updating my kernel from 2.6.34.7-56.fc13.i686 to 2.6.34.7-61.fc13.i686 I can't boot anymore. The error message says: "No root device found Boot has failed, sleeping forever."
I'm booting from 2.6.34.7-56.fc13.i686 now but I would like to sort this thing out. What should I do? File a bug? I never did that, so I don't know where to go.
View 5 Replies
View Related
Nov 23, 2010
I use Fedora 14 32 bit at home and I d not have internet in home , so I download all packages are depend on Fedora 14 in my work place and move all of them to home by USB flashI use rsync for download all packages , in home I make local repo and install all packages I need by use local repo ,right now I want update my kernel , and I want use rsync foe download kernel update for fedora 14 .How I can do this , I want rsync only download update are depend on kernel and does not download other thing How I can do this ?
View 3 Replies
View Related
Dec 9, 2010
Yesterday I ran updates that moved me from kernel Fedora (2.6.34.7-61.fc13.i686.PAE) to Fedora (2.6.34.7-63.fc13.i686.PAE). After reboot my system hangs trying to start X. I can use altF2 and log in that way but when I try to start X it fails - no screen found. I backed off to my previous kernel and used the package manager to remove the updated kernel and noticed that when it uninstalled it did not take any kmod packages with it. I assume not having an associated kmod may have been the problem? If so, how do I find the correct one to install?
relevant info:
Fedora 13 32 bit PAE (KDE spin)
video card - nvidia 460gtx
video driver - nvidia 260.19.21
View 5 Replies
View Related
